`
`
`Exhibit R
`
`
`
`Case 1:17-cv-00770-JDW Document 245-18 Filed 10/19/23 Page 2 of 3 PageID #: 24671
`
`Cold Planer NPI
`JSM Update
`July, 2011
`
`> People
`
`> Process
`
`> Product Exc ellence
`
`CONFIDENTIAL BUSINESS INFORMATION , SUBJECT TO THE PROTECTIVE ORDER
`
`CAT0128313
`
`
`
`Case 1:17-cv-00770-JDW Document 245-18 Filed 10/19/23 Page 3 of 3 PageID #: 24672
`
`Speaker Notes for Slide 15
`
`Feature of the grade & slope system to be competitive with Wirtgen. Keep the machine level with the
`ground under most conditions. Have received a lot of customer feedback on the need for this system.
`Developed a solution that achieves comparable performance and is in some ways superior to the
`Wirtgen solution (because our system continues to use only the front legs for grade control - better
`surface finish). We believe our concept limits the risk of IP conflict.
`
`Summary of technical details: Raises and lowers all four legs at the same rate, keeping the machine
`level, when going into or out of a cut Can be enabled or disabled within the grade & slope as needed.
`Will automatically adjust the rear legs (no operator input needed) to keep the machine level under the
`following conditions:
`•Plunge into cut
`•Easing into or out of cut
`•Jumping an obstacle such as a manhole cover and plunging back into the cut - as long as the
`four leg raise lower feature is utilized (see page 5)
`•When making manual adjustments during cutting (incrementing up or down)
`
`The system will not automatically level the machine when the moldboard is raised and leaving milled
`material in place. Operator will have to turn the four leg leveling system off and manually adjust the rear
`legs in this situation.
`
`CONFIDENTIAL BUSINESS INFORMATION, SUBJECT TO THE PROTECTIVE ORDER
`
`CAT0128337
`
`
Accessing this document will incur an additional charge of $.
After purchase, you can access this document again without charge.
Accept $ Charge
Still Working On It
This document is taking longer than usual to download. This can happen if we need to contact the court directly to obtain the document and their servers are running slowly.
Give it another minute or two to complete, and then try the refresh button.
A few More Minutes ... Still Working
It can take up to 5 minutes for us to download a document if the court servers are running slowly.
Thank you for your continued patience.
This document could not be displayed.
We could not find this document within its docket. Please go back to the docket page and check the link. If that does not work, go back to the docket and refresh it to pull the newest information.
Your account does not support viewing this document.
You need a Paid Account to view this document. Click here to change your account type.
Your account does not support viewing this document.
Set your membership
status to view this document.
With a Docket Alarm membership, you'll
get a whole lot more, including:
- Up-to-date information for this case.
- Email alerts whenever there is an update.
- Full text search for other cases.
- Get email alerts whenever a new case matches your search.
One Moment Please
The filing “” is large (MB) and is being downloaded.
Please refresh this page in a few minutes to see if the filing has been downloaded. The filing will also be emailed to you when the download completes.
Your document is on its way!
If you do not receive the document in five minutes, contact support at support@docketalarm.com.
Sealed Document
We are unable to display this document, it may be under a court ordered seal.
If you have proper credentials to access the file, you may proceed directly to the court's system using your government issued username and password.
Access Government Site
