Cross-Platform Release Notes for Cisco lOS
`Release 12.0SY
`
`April 5, 2013
`
`Cisco lOS Release 12.0(32)SY16
`
`Part Number: OL-10924-01 Rev. XO
`
`These release notes support Cisco lOS Release 12.0(32)SY, up to and including Cisco lOS
`Release 12.0(32)SY16. These release notes are updated as needed to describe new features, memory
`requirements, hardware support, software platform deferrals, and related documents.
`
`Cisco lOS Release 12.0(32)SY is based on Cisco lOS Release 12.0(32)S and is tailored for service
`provider and large-scale enterprise networks. Cisco lOS Release 12.0(32)S includes features that were
`initially supported in Cisco lOS Release 12.0.
`
`For a list of the software caveats that apply to Cisco lOS Release 12.0S, see the "Caveats" section on
`page 33 and the caveat parts of the
`Cisco lOS Release 12.0S document
`located on Cisco.com. The caveats document is updated for every maintenance release and is located on
`Cisco.com.
`
`Use lhese release noles in conjunclion wilh lhe Cross-Platj(Jrm Release Notes for Cisco lOS
`Release 12.0S document located on Cisco.com.
`
`We recommend that you view the field notices for this release to see if your software or hardware
`platforms are affected. If you have an account on Cisco.com, you can find field notices at
`http://www.cisco.com/warp/customer/tech_tipsfindex/fn.html. If you do not have a Cisco.com login
`account, you can find field notices at http://www.cisco.com/warp/public/tech_tips/index/fn.html.
`
`I I I I I I I I I
`I
`
`Americas Headquarters:
`Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA
`
`© 2006-2013 Cisco Systems, Inc. All rights reserved.
`
`CSI-ANI-00203021
`
`

`
`•
`
`Contents
`
`Contents
`
`•
`
`Introduction, page 2
`
`• System Requirements, page 3
`
`• New and Changed Information, page 17
`
`• MIBs, page 31
`
`• Limitations and Restrictions, page 31
`
`•
`
`Important Notes, page 31
`
`• Caveats, page 33
`
`• Troubleshooting, page 238
`
`• Related Documentation, page 239
`
`• Obtaining Documentation and Submilling a Service Request, page 245
`
`Introduction
`
`Cisco lOS Release l2,0(32)SY is the first general availability release of this software. Many of the
`features and the hardware supported in this software have been previously released to customers on other
`software releases.
`
`For information on new features and Cisco lOS commands that arc supported by Cisco lOS
`Release 12.0(32)SY, sec the "New and Changed Information·' section on page 17 and the "Caveats"
`section on page 33.
`
`Cross-Platform Release Notes for Cisco lOS Release 12.0SY
`
`OL-10924-01 Rev. XO
`
`CSI-ANI-00203022
`
`

`
`System Requirements
`
`This section describes the system requirements for Cisco IOS Release 12.0(32)SY and includes the
`following sections:
`
`System Requirements
`
`•
`
`• Supported Hardware, page 3
`
`• Determining the Software Version, page 12
`•
`• Microcode Software, page 13
`
`to a New Software Release, page 12
`
`• Feature Support, page 14
`
`• Memory Recommendations, page 16
`
`Supported Hardware
`
`This section consists of the following subsections:
`
`• Supported Platforms, page 3
`
`• Supported Modules for the Cisco 10720 Romer, page 4
`
`• Supported Line Cards for the Cisco 12000 Series Routers, page 6
`
`Supported Platforms
`
`Cisco IOS Release 12.0(32)SY supports the following platforms:
`
`• Cisco 10720 router
`
`• Cisco 12000 series routers (including the Cisco 12006, Cisco 12008, Cisco 12010, Cisco 12012,
`Cisco 12016, Cisco 12404, Cisco 12406, Cisco 12410, Cisco 12416, Cisco 12810, and
`Cisco 12816.)
`
`For additional information about supported hardware for this platform and release, please see the
`Hardware/Software Compatibility Matrix in the Cisco Software Advisor at the following location:
`
`http://www.cisco.com/cgi-bin/front.x/Support/HWSWmatrix/hwswmatrix.cgi
`
`For detailed descriptions of the new hardware features, see the ''New and Changed Information" section
`on page 17.
`
`OL-1 0924-01 Rev. XO
`
`Cross-Platform Release Notes for Cisco lOS Release 12.0SY
`
`CSI-ANI-00203023
`
`

`
`•
`
`System Requirements
`
`Supported Modules for the Cisco 10720 Router
`
`Table I lists the modules (also referred to as cards) that are supported for the Cisco 10720 in Cisco lOS
`Release 12.0(32)SY. The number in the "In" column indicates the Cisco lOS 12.0S release in which the
`module was introduced. For example, (22) means that a module was introduced in Cisco lOS
`Release 12.0(22)S. Note that, before their introduction in Cisco lOS Release 12.0(32)SY, most of these
`modules were introduced in Cisco lOS Release 12.0S.
`
`Table 1
`
`Supported Line Cards for the Cisco 10720 Router
`
`I Cisco Product Number1
`Common Abbreviation
`Fast Ethernet (FE) an Gigabit Ethernet (GE) Modules
`
`I Module Description
`
`24-port Fast Ethernet
`
`1 0720-FE-TX
`
`24-port 10/100 Ethernet access module
`
`10720-FE-FX-MM
`
`10720-FE-FX-SM
`
`24-port 100 Mbps fiber Ethernet access module,
`multimode, 2 km
`
`24-port 100 Mbps fiber Ethernet access module,
`single mode, 15 km
`
`4-port Gigabit Ethernet+ 10720-GE-FE-TX
`8-port Fast Ethernet
`
`Combined 4-port Gigabit Ethernet 8-port 10/100 Ethernet TX
`access module
`
`10720-GE-FE-TX-B
`
`Combined 4-port Gigabit Ethernet 8-port 10/100 Ethernet TX
`access module, Revision B
`
`G1gab1t Ethernet (GE) Small-Form-Factor Pluggable (SFP) Modules
`
`GE SPP
`
`1 0720-GE-SPP-SX
`1 0720-GE-SFP-LH
`
`GE SPP module-short reach (550 m)
`GE SFP module-intermediate reach (10 km)
`
`GLC-ZX-SM
`
`GE SFP module-long reach (70 km)
`
`SFP-GE-T
`
`SFP-GE-S
`SFP-GE-L
`
`GE SFP module-1000BASE-T
`
`GE SFP module-short reach (550 m), extended temperature
`GE SFP module-intermediate reach (10 km), extended
`temperature
`
`(22)
`
`(22)
`
`(22)
`
`(22)
`
`(25)
`
`(22)
`
`(22)
`
`(23)
`(31)
`
`(31)
`
`(31)
`
`Cross-Platform Release Notes for Cisco lOS Release 12.0SY
`
`OL-10924-01 Rev. XO
`
`CSI-ANI-00203024
`
`

`
`System Requirements
`
`•
`
`Table 1
`
`Supported Line Cards for the Cisco 10720 Router (continued)
`
`I Cisco Product Number1
`Common Abbreviation
`I Module Description
`Cisco Wavelength Division Multiplexing (CDWM) Small-Form-Factor Pluggable (SFP) Transceiver Modules
`
`CWDM SFP
`
`CWDM-SFP-1470
`
`CWDM-SFP-1490
`
`CWDM-SFP-1510
`
`CWDM-SFP-1530
`
`CWDM-SFP-1550
`
`CWDM-SFP-1570
`
`CWDM-SFP-1590
`
`CWDM-SFP-1610
`
`CWDM SFP module-longwave 1470 nm laser, single mode,
`gray
`
`CWDM SFP module-longwave 1490 nm laser, single mode,
`violet
`
`CWDM SFP module-longwave 1510 nm laser, single mode,
`blue
`
`CWDM SFP module-longwave 1530 nm laser, single mode,
`green
`
`CWDM SFP module-longwave 1550 nm laser, single mode,
`yellow
`
`CWDM SFP module-longwave 1570 nm laser, single mode,
`orange
`
`CWDM SFP module-longwave 1590 nm laser, single mode,
`red
`
`CWDM SFP module-longwave 1610 nm laser, single mode,
`brown
`
`Packet over SO NET (POS)/Synchronous Digital Hierarchy (SOH) Modules
`
`2-porl OC-48/STM-16
`POS
`
`10720-SR-LC-POS
`
`2-porl OC-48c/STM-16c POS/SDH uplink module, shorL reach
`(2 km)
`
`10720-IR-LC-POS
`
`10720-LR 1-LC-POS
`
`2-porl OC-48c/STM-16c POS/SDH uplink module,
`intermediate reach (15 km)
`2-port OC-48c/STM-16c POS/SDH uplink module, long reach
`(40 km)
`
`10720-LR2-LC-POS
`
`2-port OC-48c/STM-16c POS/SDH uplink module, (extra) long
`reach (80 km)
`
`(31)
`
`(31)
`
`(31)
`
`(31)
`
`(31)
`
`(31)
`
`(31)
`
`(31)
`
`(23)
`
`(23)
`
`(23)
`
`(23)
`
`Dynamic Packet Transport (OPT) Modules2
`
`2-port OC-48/STM-16
`SRP
`
`10720-SR-LC
`
`10720-IR-LC
`
`2-port OC-48c/STM-16c SRP uplink module, short reach (2 km) (22)
`(22)
`
`2-port OC-48c/STM-16c SRP uplink module, intermediate
`reach (15 km)
`
`10720-LR1-LC
`
`10720-LR2-LC
`
`2-port OC-48c/STM-16c SRP uplink module, long reach
`(40 km)
`
`2-port OC-48c/STM-16c SRP uplink module, (extra) long reach
`(80 km)
`
`Other Modules
`
`Console/ Auxiliary
`
`10720-CON-AUX=
`
`10720 console/auxiliary module
`
`RPR/SRP
`
`10720-RPR-SFP=
`
`Dual-Mode IEEE 802.17 RPR/SRP uplink module
`
`(22)
`
`(22)
`
`(22)
`
`(30)
`
`1. For a spare product number, append an equal sign(=) to the product number. For End-of-Sale (EOS) and End-of-Life (EOL) information about modules,
`refer to the Cisco product bulletins at:
`
`http://www .cisco.com/en/US/products/hw /routers/ps 14 7/prod_eol_notices_list.html
`
`2. DPT modules are also referred to as Spatial Reuse Protocol (SRP) modules.
`
`OL-1 0924-01 Rev. XO
`
`Cross-Platform Release Notes for Cisco lOS Release 12.0SY
`
`CSI-ANI-00203025
`
`

`
`•
`
`System Requirements
`
`Supported Line Cards for the Cisco 12000 Series Routers
`
`Table 2 lists the line cards that are supported for the Cisco 12000 series routers in Cisco lOS
`Release 12.0(32)SY and uses the following conventions:
`
`• Yes-The line card is supported in the software image.
`
`• No-The line card is not supported in the software image.
`
`•
`
`In-The number in the In column indicates the Cisco lOS 12.0S release in which the line card was
`introduced. For example, (11) means a that line card was introduced in Cisco lOS
`Release 12.0(11 )S. If a cell in this column contains a dash (-), support for the line card was
`included in the initial base release.
`
`Tab/e2
`
`Supported Line Cards for Cisco 12000 Series Routers
`
`Engine
`Type2
`
`Line Card Description
`
`Cisco Product Number1
`Common Abbreviation
`Core line Cards-Packet over SO NET (POS)
`1-port OC-48 POS 6
`
`OC48E/POS-SR-SC-B
`
`OC48E/POS-LR-SC-B
`
`1-port OC-48 POS ISE OC48X/POS-SR-SC
`
`OC48X/POS-LR -SC
`
`2
`
`2
`
`3
`
`3
`
`1-port OC-48c/STM-16c
`POS/SDII short reach
`
`1-port OC-48c/STM-16c
`POS/SDH long reach
`
`1-port OC-48c/STM-16c
`POS/SDH ISE short reach
`
`1-port OC-48c/STM -16c
`POS/SDH ISE long reach
`
`4-port OC-48c/STM-16c
`POS/SDH ES short reach
`
`4-port OC-48c/STM-16c
`POS/SDH ES long reach
`
`4-port7 OC-48 POS ES 8 40C48E/POS-SR-SC9
`
`4+
`
`40C48E/POS-T "R-SC 10
`
`4+
`
`8-port OC-48 POS 11
`
`80C48/POS-SFP
`
`1-port OC-192 POS
`
`OC192RO/POS-SR-SC
`
`OC192RO/POS-IR-SC
`
`1-port OC-192 POS ES 8 OC192E/POS-VSR
`
`OC192E/POS-SR-SC
`
`OC192E/POS-IR-SC
`
`OC192E/POS-LR-SC
`
`6
`
`2
`
`2
`
`4+
`
`4+
`
`4+
`
`4+
`
`8-port OC-48c/STM-16c
`POS/SDH Small Form-Factor
`Plugable (SFP)
`
`1-port OC-192c/STM-64c POS
`Enabler short reach
`
`1-port OC-192c/STM-64c POS
`Enabler intermediate reach
`
`1-port OC-192c/STM -64c
`POS/SDH ES very shorl reach
`
`1-port OC-192c/STM-64c
`POS/SDH ES shorl reach
`
`1-port OC-192c/STM-64c
`POS/SDH ES intermediate reach
`
`1-port OC-192c/STM-64c
`POS/SDH ES long reach
`
`Chassis
`
`In
`
`I 40
`10
`2.5
`Gbps3 Gbps4 Gbps5
`
`I
`
`(10) Yes Yes Yes
`
`(10) Yes Yes Yes
`
`(21) Yes Yes Yes
`
`(21) Yes Yes Yes
`
`(15) No
`
`Yes Yes
`
`(15) No
`
`Yes Yes
`
`(27) No
`
`Yes Yes
`
`(10) Yes Yes Yes
`
`(10) Yes Yes Yes
`
`(21) No
`
`Yes Yes
`
`(21) No
`
`Yes Yes
`
`(21) No
`
`Yes Yes
`
`(24) No
`
`Yes Yes
`
`Cross-Platform Release Notes for Cisco lOS Release 12.0SY
`
`OL-10924-01 Rev. XO
`
`CSI-ANI-00203026
`
`

`
`Table2
`
`Supported Line Cards for Cisco 12000 Series Routers (continued)
`
`System Requirements
`
`•
`
`Common Abbreviation
`2-port OC-192 POS 11
`
`Cisco Product Number1
`20C192/POS-VSR
`
`Engine
`Type2
`6
`
`20C192/POS-SR-SC
`
`20C192/POS-IR-SC
`
`6DS3-SMB-B
`
`12DS3-SMB-B
`
`Edge Line Cards-DS3, E3, and Packet over SONET (POS)
`6-port DS3 12
`12-port DS3 12
`6-port E3 12
`12-port E3 12
`8-port OC-3 POS
`
`6E3-SMB
`
`12E3-SMB
`
`80C3/POS-SM
`
`80C3/POS-MM
`
`16-porl OC-3 POS
`
`160C3/POS-SM
`
`6
`
`6
`
`0
`
`0
`
`0
`
`0
`
`2
`
`2
`
`2
`
`Line Card Description
`
`2-port OC-192c/STM-64c
`POS/SDH very short reach
`
`2-port OC-192c/STM-64c
`POS/SDH short reach
`
`2-port OC-192c/STM-64c
`POS/SDH intermediate reach
`
`Chassis
`2.5
`40
`10
`Gbps3 Gbps4 Gbps5
`(27) No
`
`Yes Yes
`
`In
`
`(27) No
`
`Yes Yes
`
`(27) No
`
`Yes Yes
`
`6-port DS3 with ECC
`
`(10) Yes Yes Yes
`
`12-port DS3 with ECC
`
`(10) Yes Yes Yes
`
`6-port E3 with ECC
`
`12-port E3 with ECC
`
`8-port OC-3c/STM-1c POS/SDH
`single mode
`
`8-port OC-3c/STM-1c POS/SDH
`multimode
`
`16-porl OC-3c/STM-1c POS/SDH
`single mode
`
`(15) Yes Yes Yes
`
`(15) Yes Yes Yes
`
`(10) Yes Yes Yes
`
`(10) Yes Yes Yes
`
`(10) Yes Yes Yes
`
`160C3/POS-MM
`
`4-porr1 OC-3 POS
`
`LC-40C3/POS-SM
`
`LC-40C3/POS-MM
`
`40C3/POS-LR -SC
`
`2
`
`0
`
`0
`
`0
`
`4-porr1 OC-3 POS ISE
`
`40C3X/POS-MM-MJ-B 3
`
`40C3X/POS-IR-LC-B
`
`40C3X/POS-LR-LC-B
`
`3
`
`3
`
`8-port OC-3 POS ISE
`
`80C3X/POS-MM-MJ-13 3
`
`80C3X/POS-IR-LC-B
`
`16-port OC-3 POS ISE 160C3X/POS-M-MJ-B
`
`160C3X/POS-I-LC-B
`
`3
`
`3
`
`3
`
`16-porl OC-3c/STM-1c POS/SDH
`multimode
`
`(10) Yes Yes Yes
`
`4-port OC-3c/STM-1c POS/SDH
`single mode
`
`4-port OC-3c/STM-1c POS/SDH
`multimode
`
`4-port OC-3c/STM-1c POS/SDH
`long reach
`
`4-port OC-3c/STM-1c POS/SDH
`ISE multimode
`
`4-port OC-3c/STM-1c POS/SDH
`ISE intermediate reach
`
`4-port OC-3c/STM-1c POS/SDH
`ISE long reach
`
`8-port OC-3c/STM-1c POS/SDH
`ISE multimode
`
`8-port OC-3c/STM-1c POS/SDII
`ISE intermediate reach
`
`16-port OC-3c/STM-1c POS/SDII
`ISE multimode
`
`16-port OC-3c/STM-1c POS/SDII
`ISE intermediate reach
`
`(5)
`
`Yes Yes Yes
`
`(5)
`
`Yes Yes Yes
`
`(5)
`
`Yes Yes Yes
`
`(22) Yes Yes Yes
`
`(22) Yes Yes Yes
`
`(22) Yes Yes Yes
`
`(22) Yes Yes Yes
`
`(22) Yes Yes Yes
`
`(22) Yes Yes Yes
`
`(21) Yes Yes Yes
`
`OL-1 0924-01 Rev. XO
`
`Cross-Platform Release Notes for Cisco lOS Release 12.0SY
`
`CSI-ANI-00203027
`
`

`
`•
`
`System Requirements
`
`Table2
`
`Supported Line Cards for Cisco 12000 Series Routers (continued)
`
`Common Abbreviation
`
`1-port OC-12 POS
`
`Cisco Product Number1
`LC-1 OC 12/POS -SM 13
`
`LC-10C12/POS-MM 14
`
`4-port7 OC-12 POS 6
`
`40C12/POS-IR-SC-B
`
`Engine
`Type2
`0
`
`0
`
`2
`
`40C12/POS-MM-SC-B
`
`2
`
`4-port7 OC-12 POS ISE 40C12X/POS-I-SC-B
`
`40C12X/POS-M-SC-B
`
`Channelized Edge line Cards-Optical Carrier (OC) and T3
`2-port CHOC-3,
`2CHOC3/STM1-IR-SC
`DS1/E1
`
`1-port CHOC-12, DS3 LC-OC12-DS3
`
`1-port CHOC-12, OC-3 CHOC12/STS3-IR-SC
`
`1-port CHOC-12,
`OC-3 ISE11
`4-port7 CHOC-12 ISE
`
`CHOC12/DS1-IR-SC
`
`4CHOC12/DS3-I-SCB
`
`3
`
`3
`
`0
`
`0
`
`0
`
`3
`
`3
`
`1-port CHOC-48 ISE
`
`CHOC48/DS3-SR-SC
`
`3
`
`Chassis
`2.5
`40
`10
`In
`Gbps3 Gbps4 Gbps5
`(10) Yes Yes Yes
`
`(10) Yes Yes Yes
`
`(8)
`
`Yes Yes Yes
`
`(8)
`
`Yes Yes Yes
`
`(21) Yes Yes Yes
`
`(21) Yes Yes Yes
`
`(17) Yes Yes Yes
`
`(5)
`
`(5)
`
`Yes Yes Yes
`
`Yes Yes Yes
`
`(27) Yes Yes Yes
`
`(21) Yes Yes Yes
`
`(21) Yes Yes Yes
`
`Line Card Description
`
`1-port OC-12c/STM-4c POS/SDH
`single mode
`
`1-port OC-12c/STM-4c POS/SDH
`multimode
`
`4-port OC-12c/STM-4c POS/SDH
`single mode
`
`4-port OC-12c/STM-4c POS/SDH
`multimode
`
`4-port OC-12c/STM-4c POS/SDH
`ISE single mode
`
`4-port OC-12c/STM-4c POS/SDH
`ISE multimode
`
`2-port channelized OC-3/STM -1
`(DS1/E1)
`
`1-port channelized OC-12 (DS3)
`
`1-port channelized OC-12/STM-4
`(OC-3/STM-1)
`1-port channelized OC-12/STM-4
`(DS 1/E1) ISE
`
`4-port channelized OC-12/S TM -4
`(DS3/E3, OC-3c/STM-1c)
`POS/SDH ISE
`
`1-port channelized
`OC-48/STM-16 (DS3/E3,
`OC-3c/STM-1c, OC-12c/STM-4c)
`POS/SDH ISE
`
`6-port Ch T3
`ATM line Cards
`4-port7 OC-3 ATM
`
`6CT3-SMB
`
`40C3/ATM-IR-SC
`
`40C3/ATM-MM-SC
`
`4-port OC-3 A TM ISE11 40C3X/ATM-IR-SC
`
`40C3X/ATM-MM-SC
`
`0
`
`0
`
`0
`
`3
`
`3
`
`6-port channelized T3 (Tl)
`
`(14) Yes Yes Yes
`
`4-port OC-3c/STM-1c ATM
`single mode
`
`4-port OC-3c/STM-1c ATM
`multimode
`4-port OC-3/STM-1 ATM ISE
`single mode
`
`4-port OC-3/STM-1 ATM ISE
`multimode
`
`(5)15 Yes Yes Yes
`
`(5)15 Yes Yes Yes
`
`(27) Yes Yes Yes
`
`(27) Yes Yes Yes
`
`Cross-Platform Release Notes for Cisco lOS Release 12.0SY
`
`OL-10924-01 Rev. XO
`
`CSI-ANI-00203028
`
`

`
`Table2
`
`Supported Line Cards for Cisco 12000 Series Routers (continued)
`
`System Requirements
`
`•
`
`Chassis
`2.5
`40
`10
`Gbps3 Gbps4 Gbps5
`(22) Yes Yes Yes
`
`In
`
`(22) Yes Yes Yes
`
`(5)15 Yes Yes Yes
`
`(5)15 Yes Yes Yes
`
`(13) Yes Yes Yes
`
`(13) Yes Yes Yes
`
`Line Card Description
`
`R-port OC-3c/STM-1c ATM
`single mode
`
`R-port OC-3c/STM-1c ATM
`multimode
`
`1-port OC-12c/STM-4c ATM
`single mode
`
`1-port OC-12c/STM-4c ATM
`multimode
`
`4-port OC-12c/STM-4c ATM
`single mode
`
`4-port OC-12c/STM-4c ATM
`multimode
`
`Common Abbreviation
`
`R-port OC-3 ATM
`
`Cisco Product Number1
`ROC03/ATM/TS-IR-B
`
`Engine
`Type2
`2
`
`ROC03/ATM/TS-MM-B 2
`
`1-port OC-12 ATM
`
`LC-10C12/ATM-SM
`
`LC-10C12/ATM-MM
`
`4-porr7 OC-12 ATM
`
`40C12/ATM-IR-SC
`
`40C12/ATM-MM-SC
`
`4-porr7 OC-12 ATM
`ISE
`
`40C12X/ATM-IR-SC
`
`0
`
`0
`
`2
`
`2
`
`3
`
`40C12X/ATM-MM-SC
`
`3
`
`Fast Ethernet (FE) and Gigabit Ethernet (GE) Line Cards
`
`1-port GE
`10-port GE
`8-port FE12
`
`GE-GBIC-SC-B
`10xlGE-SFP-LC-B
`
`8FE-FX-SC-B
`
`3-port GE
`4-porr7 GEISE
`
`1-port 10-GbE
`
`8FE-TX-RJ45-B
`
`3GE-GBIC-SC
`4GE-SFP-LC
`
`1X10GE-LR-SC
`
`1X10GE-ER-SC
`
`1
`4
`
`1
`
`1
`
`2
`
`3
`
`4+
`
`4+
`
`Modular GbE
`
`EPA-GE/FE-BBRD and 4+
`EPA-3GE-SX/LH-LC
`
`4-port OC-12c/STM-4c ATM ISE
`single mode
`
`4-port OC-12c/STM-4c ATM ISE
`multimode
`
`(25) Yes Yes Yes
`
`(25) Yes Yes Yes
`
`1-port Gigabit Ethernet with ECC
`10-port Gigabit Ethernet
`
`8-port Fast Ethernet,
`100BASE-FX, with ECC memory
`
`8-port Fast Ethernet,
`100BASE-TX, with ECC memory
`
`(5)
`Yes Yes Yes
`(19) Yes Yes Yes
`(10) Yes Yes Yes
`
`(10) Yes Yes Yes
`
`3-port Gigabit Ethernet
`4-port Gigabit Ethernet ISE
`
`1-port 10-Gigabit Ethernet
`long reach
`
`1-port 1 0-Gigabit Ethernet
`extended reach
`
`Modular Gigabit Ethernet:
`Gigabit Ethernet modular
`baseboard and 3-port Gigabit
`Ethernet port adapter
`
`(11) Yes Yes Yes
`(25) Yes Yes Yes
`(23) No
`Yes Yes
`
`(23) No
`
`Yes Yes
`
`(23) No
`
`Yes Yes
`
`OL-1 0924-01 Rev. XO
`
`Cross-Platform Release Notes for Cisco lOS Release 12.0SY
`
`CSI-ANI-00203029
`
`

`
`•
`
`System Requirements
`
`Table2
`
`Supported Line Cards for Cisco 12000 Series Routers (continued)
`
`Cisco Product Number1
`Common Abbreviation
`Dynamic Packet Transport (OPT) line Cards
`2-port OC-12 DPT12
`
`OC12/SRP-IR-SC-B
`
`OC12/SRP-LR-SC-B
`
`OC12/SRP-XR-SC
`
`OC12/SRP-MM-SC-B
`
`4-port7 OC-12 DPT ISE 40C12X/SRP-IR-LC
`
`40C12X/SRP-XR-LC
`
`1-port OC-48 DPT6
`
`OC48/SRP-SR-SC-B 16
`
`OC48/SRP-LR-SC-B 17
`
`4-port7 OC-48 DPT
`1-port OC-192 DPT
`
`40C48/SRP-SFP
`OC192/SRP-VSR
`
`OC192/SRP-SR-SC
`
`Engine
`Type2
`
`Line Card Description
`
`1
`
`1
`
`1
`
`1
`
`3
`
`3
`
`2
`
`2
`
`4+
`4+
`
`4+
`
`2-port OC-12c/STM-4c DPT with
`ECC single mode
`intermediate reach
`
`2-port OC-12c/STM-4c DPT with
`ECC single mode long reach
`
`2-port OC-12c/STM-4c DPT with
`ECC single mode extra long reach
`
`2-port OC-12c/STM-4c DPT with
`ECC multimode
`
`4-port OC-12c/STM-4c DPT ISE
`intermediate reach
`
`4-port OC-12c/STM-4c DPT ISE
`extended long reach
`
`1-port OC-48c/STM-16c DPT
`single mode short reach
`
`1-port OC-48c/STM-16c DPT
`single mode long reach
`
`4-port OC-48c/STM-16c DPT
`1-port OC-192c/STM-64c DPT
`very short reach
`
`1-port OC-192c/STM-64c DPT
`short reach
`
`Chassis
`
`In
`
`I 40
`10
`2.5
`Gbps3 Gbps4 Gbps5
`
`I
`
`(10) Yes Yes Yes
`
`(10) Yes Yes Yes
`
`(10) Yes Yes Yes
`
`(10) Yes Yes Yes
`
`(24) Yes Yes Yes
`
`(24) Yes Yes Yes
`
`(15) Yes Yes Yes
`
`(15) Yes Yes Yes
`
`(23) No
`(23) No
`
`Yes Yes
`Yes Yes
`
`(23) No
`
`Yes Yes
`
`OC192/SRP-IR-SC
`
`4+
`
`1-port OC-192c/STM-64c DPT
`intermediate reach
`
`(23) No
`
`Yes Yes
`
`Shared Port Adapters (SPAs)
`
`2-port T3/E3 Serial
`
`SPA-2XT3/E3
`
`4-port T3/E3 Serial
`
`SPA-4XT3/E3
`
`2-port CT3
`4-port CT3
`
`SPA-2XCT3/DSO
`SPA-4XCT3/DSO
`
`1-port CHOC-3
`
`SPA-1XCHSTM1/0C3
`
`8-port Ch Tl/El
`
`SPA-8XCHT1/El
`
`8-porl FE
`1-port lOGE
`
`2-port GE
`
`5-port GE
`
`10-port GE
`
`SPA-8XFE
`SPA-lXTENGE-XFP
`
`SPA-2X1GE
`
`SPA-5X1GE
`
`SPA-lOXlGE
`
`3
`
`3
`
`3
`3
`
`5
`
`5
`
`5
`5
`
`5
`
`5
`
`5
`
`2-port clear channel T3/E3
`
`(31) Yes Yes Yes
`
`4-port clear channel T3/E3
`
`2-port channelized T3 to DSO
`4-port channelized T3 to DSO
`
`(31) Yes Yes Yes
`(31) Yes Yes Yes
`(31) Yes Yes Yes
`
`1-port channelized STM-1/0C-3
`
`8-port channelized Tl/El
`
`8-porl Fasl Elhernel
`1-port 10-Gigabit Ethernet
`
`2-port Gigabit Ethernet SPA
`
`5-port Gigabit Ethernet
`
`1 0-port Gigabit Ethernet
`
`(32) No
`(32) No
`(32) No
`(31) No
`(32) No
`(31) No
`(31) No
`
`Yes Yes
`
`Yes Yes
`
`Yes Yes
`Yes Yes
`
`Yes Yes
`
`Yes Yes
`
`Yes Yes
`
`Cross-Platform Release Notes for Cisco lOS Release 12.0SY
`
`OL-10924-01 Rev. XO
`
`CSI-ANI-00203030
`
`

`
`Table2
`
`Supported Line Cards for Cisco 12000 Series Routers (continued)
`
`Common Abbreviation
`
`2-port OC-48 POS
`
`Cisco Product Number1
`SPA-2XOC48c
`
`Engine
`Type2
`5
`
`Line Card Description
`
`2-port OC-48 POS/RPR
`
`1-port OC-192
`POS/RPR VSR
`
`1-port OC-192
`POS/RPR
`
`SPA-OC192POS-VSR
`
`SPA-OC192POS-LR
`
`1-port OC192 POS/RPR SPA-OC192POS-XFP
`XFP
`SPA Interface Processors (SIPs)
`
`SIP-400
`SIP-600
`
`SIP-401 18
`
`SIP-501
`
`SIP-601
`
`12000-SIP-400
`12000-SIP-600
`
`12000-SIP-40 1
`
`12000-SIP-501
`
`12000-SIP-60 1
`
`5
`
`5
`
`5
`
`3
`5
`
`5
`
`5
`
`5
`
`System Requirements
`
`•
`
`In
`
`Chassis
`2.5
`40
`10
`Gbps3 Gbps4 Gbps5
`(31) No
`Yes Yes
`S2
`
`(32) No
`
`Yes Yes
`
`(31) No
`
`Yes Yes
`
`(31) No
`
`Yes Yes
`
`1-port OC-192/STM64 POS/RPR
`VSR Optics
`
`1-port OC-192/STM64 POS/RPR
`SMLR Optics
`
`1-port OC-192/STM64 POS/RPR
`XFP Optics
`
`2.5G ISE SPA Interface Processor. (31) Yes Yes Yes
`(31) No
`lOG Engine 5 SPA Interface
`Yes Yes
`Processor.
`
`2.5G Multiservice Engine SPA
`Interface Processor.
`
`5G Multiservice Engine SPA
`Interface Processor.
`
`lOG Multiservice Engine SPA
`Interface Processor.
`
`(32) Yes Yes Yes
`
`(32) No
`
`Yes Yes
`
`(32) No
`
`Yes Yes
`
`1. For a spare product number, append an equal sign(=) to the product number. For End-of-Sale (EOS) and End-of-Life (EOL) information about line cards,
`refer to the Cisco product bulletins at:
`
`http://www .cisco. com/cn/US/partncrlproducts/b w /routcrs/ps 167 lprod_col_noticcs_list.html
`
`2. Engine 3 (E3) is commonly referred to as IP Services Engine (ISE); Engine 4 plus (E4+) is commonly referred to as Enhanced Services (ES) engine.
`
`3. Cisco 12006, Cisco 12008, Cisco 12010, Cisco 12012, and Cisco 12016 routers. SIPs and SPAs are only supported on the Cisco 12006 and Cisco 12010
`chassis. None of the SIP cards and SPAs are supported in either the Cisco 12008 or the Cisco 12012 routers (reference note 18 for Cisco 12016 support).
`The enhanced fabric which supports Single Router APS, BITS and Dual Priority is available in Cisco lOS Release 12.0(32)SY2 and higher for the
`Cisco 12010 and Cisco 12016 routers. The enhanced fabric without the Single Router APS, BITS and Dual Priority functionalities can also be used on
`the Cisco 12006 routers with Cisco lOS 12.0(32)SY8 or later releases. For support of these features on Cisco 12006 chassis, reference the Cisco lOS
`Release 12.0(33)S release notes. The Cisco Part Number for the Cisco 12010 fabric option and fabric kit is 12010E/SO and 12010E/50=. The Cisco Part
`Number for the Cisco 12016 fabric option and fabric kit is 12016E/80 and 12016E/80=. The Cisco Part Number for the Cisco 12006 fabric option and
`fabric kit is 12006E/30 and 12006E/30=. The SR APS feature is supported using the Engine3 A TM line cards. BITS feature is supported on Engine3 and
`EngineS POS and ATM line cards. DP feature is supported on EngineS (2.SG mode) line cards.
`4. Cisco 12404, Cisco 12406, Cisco 12410, and Cisco 12416. The enhanced fabric which supports Single Router APS, BITS and Dual Priority is available
`in Cisco lOS Release 12.0(32)SY2 and higher for the Cisco 12410 and Cisco 12416 routers. The enhanced fabric without the Single Router APS, BITS and
`Dual Priority functionalities can also be used on the Cisco 12406 routers with Cisco lOS 12.0(32)SY8 or later releases. For support of these features on
`Cisco 12406 chassis, reference the Cisco lOS Release 12.0(33)S Release notes. The Cisco Part Number for the Cisco 12410 fabric option and fabric kit is
`12410E/200 and 12410E/200=. The Cisco Part Number for the Cisco 12416 fabric option and fabric kit is 12416E/320 and 12416E/320=. The Cisco Part
`Number for the Cisco 12406 fabric option and fabric kit is 12406E/120 and 12406E/120=. The SR APS feature is supported using the Engine3 ATM line
`cards. BITS feature is supported on Engine3 and EngineS POS and A TM line cards. DP feature is supported on Engine4, Engine4+ and EngineS line
`cards. The enhanced fabric without the Single Router APS. BITS and Dual Priority functionalities can also be used on the Cisco 12404 routers with
`Cisco lOS 12.0(32)SY11 or later releases. The Cisco Part Number for the Cisco 12404 fabric option and fabric kit is 12404E/80 and 12404E/80=.
`
`S. Cisco 12810 and Cisco 12816. The enhanced fabric which supports Single Router APS, BITS and Dual Priority is available in Cisco lOS
`Release 12.0(31)S and higher for the Cisco 12810 and Cisco 12816 routers. The Cisco Part Number for the Cisco 12810 fabric option and fabric kit is
`12810E/800 and 12810E/800=. The Cisco Part Number for the Cisco 12816 fabric option and fabric kit is 12816E/1280 and 12816E/1280=. The SR APS
`feature is supported using the Engine3 ATM line cards. BITS feature is supported on Engine6 POS line cards in addition to those listed in note 4. DP
`feature is supported on Engine4, Engine4+, EngineS and Engine6 line cards.
`
`6. Revision B replaces the initial version.
`7. A 4-port line card is also referred to as a '·Quad" line card.
`
`OL-1 0924-01 Rev. XO
`
`Cross-Platform Release Notes for Cisco lOS Release 12.0SY
`
`CSI-ANI-00203031
`
`

`
`•
`
`System Requirements
`
`8. This Engine 4+ version replaces the initial Engine 4 version.
`9. The part number may also be referred to as 40C-48E/POS-SR-SC.
`10. The part number may also be referred to as 40C-48E/POS-LR-SC.
`11. This line card was released in Cisco lOS Release 12.0(27)Sl.
`
`12. This version with ECC memory replaces the initial version without ECC memory.
`
`13. The part number may also be referred to as LC-10C12-POS-SM.
`14. The part number may also be referred to as LC-10C12-POS-MM.
`
`15. Cisco lOS Release 12.0(10)S is recommended.
`16. The part number may also be referred to as OC-48/SRP-SR-SC-B.
`17. The part number may also be referred to as OC-48/SRP-LR-SC-B.
`
`18. SlP-401 is not supported on the Cisco 12008, Cisco 12012 and Cisco 12016 (with non-enhanced fabric) routers. This line card is supported on a
`Cisco 12016 router that is configured with the enhanced fabric.
`
`Determining the Software Version
`
`To determine the version of Cisco lOS software that is running on your Cisco router, log in to the router
`and enter the show version EXEC command:
`
`Router> show version
`
`Cisco Internetwork Operating System Software
`IOS (tm) 10720 Software (c10700-p-mz), Version 12.0(32)SY, EARLY DEPLOYMENT RELEASE
`SOFTI'/ARE
`
`Upgrading to a New Software Release
`
`For information about selecting a new Cisco lOS software release, see How to Choose a Cisco lOS
`Software Release at:
`
`http://www .ci sco.com/warp/public/ 130/choosing_ios.shtml
`
`For information about upgrading to a new software release, see the appropriate platform-specific
`document:
`
`• Cisco 10700 Series Routers
`
`http://www .cisco.com/cn/US/products/h w/routcrs/ps 133/products_tcch_notc09186a0080094c07 .s
`html
`
`• Cisco 12000 Series Routers
`
`http://www .cisco.com/cn/US/products/h w /routers/ps 133/products_tech_notc09186a0080094c07 .s
`html
`
`For Cisco lOS upgrade ordering instructions, sec the document at:
`
`http://www .cisco.com/warp/publ ic/cc/pd/iosw/prodli i/957 _pp.htrn
`
`To choose a new Cisco lOS software release by comparing feature support or memory requirements, use
`Cisco Feature Navigator. Cisco Feature Navigator is a web-based tool that enables you to determine
`which Cisco lOS and Catalyst OS software images support a specific set of features and which features
`are supported in a specific Cisco lOS image. You can search by feature or by feature set (software
`image). Under the release section, you can compare Cisco lOS software releases side by side to display
`both the features unique to each software release and the features that the releases have in common.
`
`Cross-Platform Release Notes for Cisco lOS Release 12.0SY
`
`OL-10924-01 Rev. XO
`
`CSI-ANI-00203032
`
`

`
`System Requirements
`
`•
`
`Cisco Feature Navigator is updated regularly when major Cisco lOS software releases and technology
`releases occur. For the most current information, go to the Cisco Feature Navigator home page at:
`
`http://www.cisco.com/go/fn
`
`To choose a new Cisco lOS software release based on information about defects that affect that software,
`use Bug Toolkit at:
`
`http://www .cisco .c om/c gi -bin/Support/B ugtool/launch_bugtool. pl
`
`Microcode Software
`
`This section consists of the following subsections:
`
`• Shared Port Adapter FPD Image Packages for the Cisco 12000 Series, page 13
`
`Shared Port Adapter FPD Image Packages for the Cisco 12000 Series
`
`Field-Programmable Device (FPD) image packages are used to update Shared Port Adapter (SPA) FPD
`images. If a discrepancy exists between an SPA FPD image and the Cisco lOS image that is running on
`the router, the SPA is deactivated until this discrepancy is resolved. For additional information on FPDs,
`including the upgrade process, see the "Upgrading Field-Programmable Devices" section of the
`Cisco 12000 Series Router SIP and SPA Software Configuration Guide:
`
`http://www .cisco .com/uni vercd/ cc/td/doc/product/ core/cis 12000/J i necard/lc _spa/ s pa_swcs/index .11 tm
`
`The maximum time to upgrade the FPD images on one SPA is 2 minutes. The total FPD upgrade time
`depends on the number of SPAs.
`
`~ ..
`
`Note
`
`Shared Port Adapter FPD Image Package for Cisco lOS Release 12.0(32)SY
`
`The FPD image package that is used to upgrade SPAs on a router that runs Cisco lOS
`Release 12.0(32)SY is the c12k-fpd-pkg.120-32.S.pkg file. This SPA FPD image package file is
`accessible from the page from which you download your specific Cisco lOS image in the Software
`Center on Cisco.com and contains the components that are listed in Table 3.
`
`Table3
`
`Cisco 12000 Series FPD Image Package Contents for Release 12.0(32)5
`
`Supported SPAs
`2-port T3/E3 Serial SPA
`
`4-port T3/E3 Serial SPA
`
`FPD
`ID
`1
`
`2
`
`3
`4
`
`1
`
`2
`
`3
`4
`
`FPD Component Name
`T3E3 SPA ROMMON
`
`T3E3 SPA l/0 FPGA
`
`T3E3 SPA E3 FPGA
`
`T3E3 SPA T3 FPGA
`
`T3E3 SPA ROMMON
`
`T3E3 SPA l/0 FPGA
`
`T3E3 SPA E3 FPGA
`
`T3E3 SPA T3 FPGA
`
`Minimum
`Required
`FPD
`Component Hardware
`Version
`Version
`2.12
`0.0
`
`0.24
`
`1.0
`
`1.0
`2.12
`
`0.24
`
`1.0
`
`1.0
`
`0.0
`
`0.0
`
`0.0
`
`0.0
`
`0.0
`
`0.0
`
`0.0
`
`OL-1 0924-01 Rev. XO
`
`Cross-Platform Release Notes for Cisco lOS Release 12.0SY
`
`CSI-ANI-00203033
`
`

`
`•
`
`System Requirements
`
`Table 3
`
`Cisco 12000 Series FPD Image Package Contents for Release 12.0(32)5 (continued)
`
`Minimum
`Required
`FPD
`Component Hardware
`Version
`Version
`
`Supported SPAs
`
`2-port Channelized T3 SPA
`
`FPD
`ID
`1
`
`4-port Channelized T3 SPA
`
`1-port Channelized STM-1/0C-3
`SPA
`
`8-port Channelized Tl/El SPA
`
`8-port FE SPA
`
`1-port lOGE SPA
`
`2-port GE SPA
`S-port GE SPA
`
`10-port GE SPA
`
`2-port OC-48 POS/SRP HH SPA
`
`2
`
`3
`
`3
`1
`
`2
`
`3
`
`3
`
`1
`2
`
`3
`1
`
`1
`2
`
`1
`
`1
`
`1
`1
`
`1
`
`1
`
`FPD Component Name
`
`CT3 SPA ROMMON
`
`CT3 SPA 1/0 FPGA
`
`CT3 SPA T3 FPGA Rl
`
`CT3 SPA T3 FPGA R2
`
`CT3 SPA ROMMON
`
`CT3 SPA 1/0 FPGA
`
`CT3 SPA T3 FPGA Rl
`
`CT3 SPA T3 FPGA R2
`
`STMl/OC-3 SPA ROMMON
`STMl/OC-3 SPA 1/0 FPGA
`
`STMl/OC-3 SPA ET3 FPGA
`
`CTEl SPA ROMMON
`
`CTEl SPA ROMMON NP
`CTEl SPA 1/0 FPGA
`
`FE SPAFPGA
`
`lOGE SPA FPGA
`
`GE SPAFPGA
`GE SPAFPGA
`
`GE SPAFPGA
`
`2.12
`
`2.2
`
`0.11
`
`0.15
`
`2.12
`
`2.2
`
`0.11
`
`0.15
`
`2.12
`1.2
`
`1.1
`
`2.12
`
`2.12
`2.1
`
`1.0
`
`1.7
`
`1.8
`1.8
`
`1.8
`
`Multipart OC-48 POS/RPR SPA 1.0
`FPD
`
`0.100
`
`0.100
`0.100
`
`0.200
`
`0.100
`
`0.100
`0.100
`
`0.200
`
`0.0
`0.0
`
`0.0
`0.14
`
`0.0
`0.0
`
`0.0
`
`0.0
`
`0.0
`0.0
`
`0.0
`
`0.0
`
`0.0
`
`5.0
`
`0.0
`
`2.0
`
`1-port OC-192 POS/SRP FH SPA 1
`
`1-port POS/RPR SPA IOFPGA
`Pl
`
`1
`
`1-port POS/RPR SPA IOFPGA
`P3
`
`1-port OC-192 POS/SRP HH SPA 1
`
`1-port POS/RPR SPA IOFPGA
`Pl
`
`1
`
`1-port POS/RPR SPA IOFPGA
`P2
`
`1.2
`
`1.3
`
`1.2
`
`1.2
`
`Feature Support
`
`Cisco lOS software is packaged in feature sets that consist of software images that support specific
`platforms. The feature sets available for a specific platform depend on which Cisco lOS software images
`are included in a release. Each feature set contains specific Cisco lOS features.
`
`Cross-Platform Release Notes for Cisco lOS Release 12.0SY
`
`OL-10924-01 Rev. XO
`
`CSI-ANI-00203034
`
`

`
`System Requirements
`
`•
`
`Lh
`Caution
`
`Cisco lOS images with strong encryption (including, but not limited to 168-bit [3DES] data encryption
`feature sets) arc subject to U,S, government export controls and have limited distribution, Strong
`encryption images to be installed outside the United States are likely to require an export license,
`Customer orders may be denied or subject to delay because of U,S. government regulations. When
`applicable, the purchaser/user must obtain local import and use authorizations for all encryption
`strengths. Please contact your sales representative or distributor for more information, or send an e-mail
`to export @cisco.com.
`
`Feature-to-image mapping is available through Cisco Feature Navigator. Cisco Feature Navigator is a
`web-based tool that enables you to determine which Cisco lOS software images support a specific set of
`features and which features are supported in a specific Cisco lOS image. You can search by fe