Cisco Nexus 7000 Series NX-OS Release Notes,
`Release 6.2
`
`Date: November 14, 2014
`Part Number: OL-29671-06, DO
`Current Release: 6.2(10)
`
`, ..
`
`Note
`
`This document describes the features, caveats, and limitations for Cisco NX -OS software for use on the
`Cisco Nexus 7000 Series Switches. Use this document in combination with documents listed in the
`''Related Documentation" section on page 215.
`
`Release notes are sometimes updated with new information about restrictions and caveats. See the
`following wehsite for the most recent version of the Cisrn Nexus 7000 Series NX-OS Release Notes,
`Release 6.x:
`http://www .cisco .com/ c/en!us/su pport/ switches/nexus-7000- series-switches/products-release-notes-lis t.h tml
`
`I I I I • I I I •
`I
`
`Cisco Systems, Inc.
`www.cisco.com
`
`CSI-AN 1-00128337
`
`

`
`Table l shows the online change history for this document.
`
`Table 1
`
`Online History Change
`
`Part Number
`
`Revision Date
`
`Description
`
`August 22, 2013
`
`August 26, 2013
`
`September 5, 2013
`
`Created release notes for Release 6.2(2).
`• Added CSCuh18007to the "Open
`Caveats-Cisco NX-OS Release 6.2" section.
`• Added the ''ECMP Support in Hardware" limitation .
`• Added the "CLl Command for Breakout
`Capabilities" limitation.
`• Added a caveat about FEX queuing to the
`"Upgrade or Downgrade Caveats'' section.
`• Added 1Pv6 Inter-AS Option B lite as a supported
`MPLS feature.
`• Added CSCug37851 to the "Resolved
`Caveats-Cisco NX-OS Release 6.2(2)" section.
`• Added CSCui 13170 to the "Open
`Caveats-Cisco NX-OS Release o 2'" section.
`• Updated the supported FEX modules for the
`N77-F248XP-23E I/0 module in Table 3.
`• Added vPC and vPC+ to the "New Software
`Features'' section.
`• Updated OTV in the ·'New Software Features''
`section.
`• Updated the "ISSU Upgrade Steps" section .
`• Updated "VACL Configuration Should Be
`Removed Before ISSU" in the ''Upgrade or
`Downgrade Caveats" section.
`• Added CSCtf36357 to the ·'Resolved
`Caveats-Cisco NX-OS Release 6.2(2)" section.
`• Added Security Features to the '·New Soflware
`Features'' section.
`• Modified the description of the "Behavior of
`Control Plane Packets on an F2e Series Module"
`limitation.
`• Added the "WCCP Support in a Mixed Mode
`VDC'' limitation.
`September 16,2013 Updated vPC and vPC+ in the "New Software
`Features ., section.
`September 18, 2013 Added "Upgrade With an M2 Series Module
`Installed" to the "Upgrade/Downgrade Paths and
`Cavcals'' section.
`
`September 6, 2013
`
`September 10. 2013
`
`OL-29671-01 AO
`
`BO
`
`C0505
`
`DO
`
`EO
`
`FO
`
`GO
`
`HO
`
`September 30, 2013 Updated FabricPath in the ''New Software Features"
`section.
`
`Cisco Nexus 7000 Series NX-OS Release Notes, Release 6.2
`
`OL-29671-116
`
`CSI-ANI-00128337.000001
`
`

`
`Table 1
`
`Online History Change (continued)
`
`Revision Date
`Part Number
`OL-29671-02 AO
`October 16, 2013
`BO
`October 21, 2013
`
`Description
`Created release notes for Release 6.2(2a).
`Added the Cisco ~exus B22 Fabric Extender for HP
`(N2K-B22HP) to Table 2 and Table 3.
`
`October 22, 2013
`
`Updated the ''Security Features'' section of the ''Cisco
`NX-OS Release 6.2(2) Software Features'' section.
`
`October 30, 2013
`
`Updated Table 3 to add support for Cisco Nexus B22
`Fabric Extender for HP (N2K-B22HP) on the 48-port
`1/10 Gigabit Ethernet SFP+ I/0 F2 Series module
`(N7K-F248XP-25).
`
`December 4. 2013
`
`November 21, 2013 Updated the ··Limil.Jl.ions" section to add "Behavior
`of Control Plane Packets on an F2e Series Module".
`• Updated Table 4 to list correct Product ID !'or the
`Cisco Nexus 7000 Series Network Analysis
`Moclule.
`• Updated the "Open Caveats-Cisco NX-OS
`Release 6.2" section to add CSCul81224.
`
`December 10,2013 Updated Table 9 to add support for Fe and F2e Series
`modules hardware as ERSPAN destinations.
`
`January 6, 2014
`
`December 20, 2013 Created the release notes for Release 6.2(6).
`• Updated Table 3 to add FEX module support for
`the F3 Series modules in Release 6.2(6).
`• Updated Table 5 to add the F3 Series modules and
`supported transceivers for Release 6.2(6)
`
`co
`
`DO
`
`EO
`
`FO
`
`GO
`
`OL-29671-03 AO
`
`BO
`
`co
`
`DO
`
`January 7, 2014
`
`January 7. 2014
`
`EO
`
`January 8, 2014
`
`Added Physical Port vPC to the new features for
`Release 6 .2( 6).
`
`Updated the "OTV Support"section and the "OTV''
`section under New Software Features for Release
`6.2(6)
`
`Added the Cisco ~exus B22HP Fabric Extender for
`HP (N2K-B22HP) to the ''Cisco NextlS Fabric
`
`Extenders .. section.
`
`FO
`
`GO
`
`HO
`
`IO
`
`January 4, 2014
`
`Updated the TSSU and TSSD information in the
`''Upgrade/Downgrade Paths and Caveats'' section.
`
`January 22, 2014
`
`Updated the "Open Caveats-Cisco NX-OS Release
`6.2" section to add CSCul91443.
`
`January 23, 2014
`
`Updated the ''Interoperability Between Modules"
`information.
`
`January 24, 2014
`
`Updated the Updated the ''Limitations'' section to add
`''The no hardware ejector enable Command is Not
`Recommended for Long-Term Use"
`
`OL-29671-06
`
`Cisco Nexus 7000 Series NX-OS Release Notes, Release 6.2
`
`CSI-ANI-00128337.000002
`
`

`
`Table 1
`
`Online History Change (continued)
`
`Part Number
`
`Revision Date
`February 5, 2014
`
`JO
`
`KO
`
`LO
`OL-29671-04 AO
`
`I30
`co
`
`DO
`
`EO
`
`Description
`• Updaled lhe Cisco NX-OS Release 6,216)
`Software Features section to remove inaccurate
`FIPs certification feature from.
`• Updated Table 3 to add the F3-Senes 12-port
`40-Gigabit Ethernet SFP+ 1/0 module
`(N7K-F312FQ-25) for Cisco Nexus 7000
`switches.
`• Updated the "Features Available on F2. F2c, and
`F3 Series Modules" section to add MACSec
`support for the F2e Series modules.
`• Updated ''Interoperability Between Muduks''
`section to add that you cannot interoperate the F3
`Series plus the F2 and/or F2e Series plus M2
`Series in the same VDC.
`• Updated "Non-ISSU Upgrade Steps'' section .
`February 26, 2014 Created the release notes tor Release 6.2(6a).
`March 10, 2014
`Revised Table 5.
`
`February 17, 2014
`
`February 20, 2014
`
`April 2, 2014
`
`April 3. 2014
`
`April 8. 2014
`
`Removed support for ERSPAN destination for F3
`Series modules.
`
`Revised Tables 2 and 3.
`
`Correct Cisco NX-OS Release to 6.2(6) for CLI
`command for breakout capabilities.
`
`Cisco Nexus 7000 Series NX-OS Release Notes, Release 6.2
`
`OL-29671-06
`
`CSI-ANI-00128337.000003
`
`

`
`Table 1
`
`Online History Change (continued)
`
`Revision Date
`Part Number
`OL-29671-05 AO
`April 25. 2014
`BO
`April 26, 2014
`
`Description
`Created the release notes for Release 6.2(8).
`Added two additional caveats to the ''Open
`Caveats-Cisco NX-OS Release 6.2" section.
`
`co
`DO
`
`EO
`
`FO
`
`GO
`
`HO
`
`10
`JO
`KO
`
`LO
`
`MO
`
`April 28. 2014
`
`Added additional caveats to the "Caveals'' section.
`
`May 1. 2014
`
`May 6. 2014
`
`May 12, 2014
`
`May 13,2014
`
`Added additional caveats to the ''Caveats" section.
`
`Added additional caveat to the "Open Caveals-Cisco
`NX-OS Release 6.2"section.
`Updated information for LISP in ''Cisco NX-OS
`Release 6.2(8) Software r:eaturcs·· section.
`
`Added list of mouules and required level of software
`to ''CLI Command for Breakout Capabilities" section.
`
`May 22, 2014
`
`Added additional caveat to the '"Caveats" section.
`
`June 3. 2014
`
`Updated Table 9.
`
`June 10, 2014
`
`Updated Table 5.
`
`June 12, 2014
`
`Added additional caveat to the "Caveats·· section.
`
`June 25,2014
`
`July 7, 2014
`
`Added the ''Resolved Caveats-Cisco NX-OS
`Release 6.2(8a)" section.
`
`Added the '·Resolved Caveats-Cisco NX-OS
`Release 6.2(6b)" section.
`
`00
`
`July 25, 2014
`
`PO
`
`August 8, 2014
`
`Updated the "Suppurted Upgrade and Downgrade
`Pat11s·· to add Release 6.2(6b) and Release 6.2(8a).
`Updated the "Supported Upgrade and Downgrade
`Paths'' tables to add 6.1(4a).
`
`Updated the "VDC Ports Can Become Unallocated
`After a Downgrade'· caveat in the "Upgrade or
`Downgrade Caveats'' section.
`
`Added an additional caveat to the"Upgrade or
`Downgrade Caveats" section.
`
`Added CSCup65230 lo the "Resol vcd
`Caveats-Cisco NX-OS Release 6.2(2)''section.
`
`Added an additional caveat to the''Upgrade or
`Downgrade Caveats" section.
`
`Updated the "Limitations'' section to add "Native
`VLAN Change Causes Link Flap''.
`
`Added CSCug7180 l to the ··Resolvecl
`Caveats-Cisco NX-OS Release 6.2(2)''section.
`
`QO
`
`September 11,2014 Added CSCui72592 and CSCuo93631 to the "Open
`Caveats-Cisco NX-OS Release 6.2'' section.
`
`OL-29671-06
`
`Cisco Nexus 7000 Series NX-OS Release Notes, Release 6.2
`
`CSI-ANI-00128337.000004
`
`

`
`Contents
`
`Contents
`
`Table 1
`
`Online History Change (continued)
`
`Part Number
`
`Revision Date
`
`Description
`
`OL-29671-06 AO
`
`October 20, 2014
`
`Created the release notes for Release 6.2(10).
`
`BO
`
`co
`
`DO
`
`EO
`
`November 5, 2014 Added CSCul05775 to "Open Caveats-Cisco
`NX-OS Release 6.2'' section.
`
`November 1 L 2014 Added ''Resolved Caveats-Cisco NX-OS Release
`6.2( 8b )" section.
`
`November 14, 2014 Added CSCur57579 to ''Open Caveats-Cisco
`NX-OS Release 6.2'' section.
`
`November 17, 2014 UpdateLi the ''Cisco NX-OS Release 6.2(10) Software
`Features" section to add ''License Requirement
`MP-BGP RR for PabricPath (aka DPA)."
`
`This document includes the following sections:
`
`•
`
`llllrmluCLiou, page 6
`
`• System Requirements, page 7
`
`• Upgrade/Downgrade Paths anJ Caveats. page 22
`
`• CMP Images. page 31
`
`• EPLD Images, page 32
`
`• New Hardware. page 32
`
`• Changed Software Features, page 35
`
`• New Soflwarc Fearures, page 36
`
`• Licensing, page 51
`
`• Limitations, page S 1
`
`• Caveats, page 59
`
`• Related Documentation, page 215
`
`• Obtaining Documentation and Submitting a Service Request, page 216
`
`Introduction
`
`The Cisco NX-OS software for the Cisco Nexus 7000 Series fulfills the routing, switching, and storage
`networking requirements of data centers and provides an Extensible Markup Language (XML) interface
`ami a command-line interface (CLI) similar to Cisco lOS software.
`
`Cisco Nexus 7000 Series NX-OS Release Notes, Release 6.2
`
`OL-29671-116
`
`CSI-ANI-00128337.000005
`
`

`
`System Requirements
`
`•
`
`System Requirements
`
`This section includes the following topics:
`
`• Memory Requirements, page 7
`
`• Supported Device Hardware, page 7
`
`Memory Requirements
`
`Cisco NX-OS Release 6.2 software requires 8 GB of memory. If you have a Cisco Nexus 7000 Series
`system with a Supervisor 1 module with 4GB of memory, you must upgrade to 8 GB of memory using
`the memory upgrade kit. N7K-SUP1-8GBUPG=, before you install Cisco NX-OS Release 6.2.
`
`Instructions for upgrading to the new memory are available in the ''Upgrading Memory for Supervisor
`Modules" section of the Cisco Nexus 7000 Series Hardware Installation and Rl!jerence Guide.
`
`Supported Device Hardware
`
`The Cisco NX-OS software supports the Cisco Nexus 7000 Series that includes Cisco Nexus 7000
`switches and Cisco Nexus 7700 switches. You can find detailed information about supported hardware
`in the Cisco Nexus 7000 Series Hardware Installation and Reference Guide.
`
`Table 2 shows the Cisco Nexus 7000 Series hardware supported by Cisco NX-OS Release 6.x,
`Release S.x, and Release 4.x software.
`
`Table 3 shows the FEX modules supported by the Cisco Nexus 7000 Series I/0 modules.
`
`Table 4 shows the service modules supported by the Cisco Nexus 7000 Series switches.
`
`"Eihle 5 shows the transceiver devices supported by each release.
`
`For a list of minimum recommended Cisco NX-OS software releases for use with Cisco Nexus 7000
`Series switches, see the document Minimum Recommended Cisco N¥.-OS Releasesfor Cisco Nexus 7000
`Si!ries Switches.
`
`Table 2
`
`Cisco Nexus 7000 Series Hardware Supported by Cisco NX-OS Software
`
`Product ID
`
`N77-C7706
`
`N77-C7718
`
`N77-C7710
`
`N7K-C7004
`
`N7K-C7009
`
`N7K-C7010
`
`N7K-C7018
`
`N77 -C7718-FAN
`
`N77-C7710-FAN
`
`N7K-C7004-FAN=
`
`Hardware
`
`Minimum Software Release
`
`Cisco Nexus 7706 chassis
`
`Cisco Nexus 7718 chassis
`
`Cisco Nexus 7710 chassis
`
`Cisco Nexus 7004 chassis
`
`Cisco Nexus 7009 chassis
`
`Cisco Nexus 7010 chassis
`
`Cisco Nexus 7018 chassis
`
`6.2(6)
`
`6.2(2)
`
`6.2(2)
`
`6.1(2)
`
`5.2(1)
`
`4.0(1)
`
`4.1(2)
`
`Fan, Cisco Nexus 7718 chassis
`
`6.2(2)
`
`Fan, Cisco Nexus 7710 chassis
`
`Replacement fan for the Cisco
`Nexus 7004 chassis
`
`6.2(2)
`
`6.1 (2)
`
`OL-29671-06
`
`Cisco Nexus 7000 Series NX-OS Release Notes, Release 6.2
`
`CSI-ANI-00128337.000006
`
`

`
`•
`
`System Requirements
`
`Tab/e2
`
`Cisco Nexus 7000 Series Hardware Supported by Cisco NX-OS Software (continued)
`
`Product ID
`
`N7K-C7009-FAN
`
`N7K-C7010-FAN-S
`
`N7K-C7010-FAN-F
`
`N7K-C7018-FAN
`
`N77-AC-3KW
`
`N77-DC-3KW
`
`N7K-AC-3KW
`
`N7K-DC-3KW
`
`N7K-AC-6.0KW
`
`N7K-AC-7.5KW-INT
`N7K-AC-7.5KW-US
`
`N7K-DC-6.0KW
`N7K-DC-PIU
`N7K-DC-CAB=
`
`N77-SUP2E
`
`N7K-SUP2E
`
`N7K-SUP2
`
`N7K-SUP1
`
`N7K-SUP1-8GBUPG
`
`N77-C7706-FAB-2
`
`N77-C7718-FAB-2
`
`N77-C7710-FAB-2
`
`N7K-C7009-FAB-2
`
`N7K-C7010-FAB-2
`
`N7K-C7010-FAB-1
`
`Hardware
`
`Minimum Software Release
`
`Replacement fan for the Cisco
`Nexus 7009 chassis
`
`System fan tray for the Cisco
`Nexus 7010 chassis
`
`Fabric fan tray for the Cisco
`Nexus 7010 chassis
`
`Fan tray for the Cisco Nexus
`7018 chassis
`
`Cisco Nexus 7700 AC power
`supply
`
`Cisco Nexus 7700 DC power
`supply
`
`3.0-kW AC power supply unit
`
`3.0-kW DC power supply unit
`
`6.0-kW AC power supply unit
`
`7.5-kW AC power supply unit
`
`6.0-kW DC power supply unit
`(cable included)
`DC power interface unit
`DC 48 V, -48 V cable (spare)
`
`5.2(1)
`
`4.0(1)
`
`4.0(1)
`
`4.1(2)
`
`6.2(2)
`
`6.2(2)
`
`6.1(2)
`
`6.1(2)
`
`4.0(1)
`
`4.1(2)
`4.1(2)
`
`5.0(2)
`5.0(2)
`5.0(2)
`
`Cisco Nexus 7700 Supervisor 2 6.2(2)
`Enhanced module
`
`Supervisor 2 Enhanced module
`
`Supervisor 2 module
`
`Supervisor 1 module
`
`Supervisor module memory kit
`upgrade
`
`Fabric Module. Cisco Nexus
`7706 chassis
`
`Fabric Module, Cisco Nexus
`7718 chassis
`
`Fabric Module, Cisco Nexus
`7710 chassis
`
`Fabric module. Cisco Nexus
`7000 Series 9-slot
`
`Fabric module, Cisco Nexus
`7000 Series 10-slot
`
`Fabric module, Cisco Nexus
`7000 Series 1 0-slot
`
`6.1(1)
`
`6.1(1)
`
`4.0(1)
`
`5.1(1)
`
`6.2(6)
`
`6.2(2)
`
`6.2(2)
`
`5.2( 1)
`
`6.0(1)
`
`4.0(1)
`
`Cisco Nexus 7000 Series NX-OS Release Notes, Release 6.2
`
`OL-29671-06
`
`CSI-ANI-00128337.000007
`
`

`
`Table 2
`
`Cisco Nexus 7000 Series Hardware Supported by Cisco NX-OS Software (continued)
`
`System Requirements
`
`•
`
`Product ID
`
`N7K-C7018-FAB-2
`
`N7K-C7018-FAB-1
`
`N77-F348XP-23
`
`N77-F324FQ-25
`
`N77-F312CK-26
`
`N7K-F312FQ-25
`
`N7K-P306CK-25
`
`N77-F248XP-23E
`
`N7K -F248XT-25E
`
`N7K-F248XP-25E
`
`N7K-F248XP-25
`
`N7K-Fl32XP-15
`
`N7K-M202CF-22L
`
`N7K-M206FQ-23L
`
`N7K-M224XP-23T,
`
`N7K-M108X2-12L
`
`N7K -M 132XP-12
`
`Hardware
`
`Minimum Software Release
`
`Fabric module, Cisco Nexus
`7000 Series 18-slot
`
`Fabric module, Cisco Nexus
`7000 Series 18-slot
`
`Cisco Nexus 7700 48-port
`1/1 0-Gigabit Ethernet SFP+ 1/0
`module (F3 Series)
`
`Cisco Nexus 7700 24-port
`40-Gigabit Ethernet QSFP+ 1/0
`module (F3 Series)
`
`Cisco Nexus 7700 12-port
`100-Gigabit Ethernet CPAK 1/0
`module (F3 Series)
`
`Cisco Nexus 7000 12-port
`40-Gigabit Ethernet QSFP+ 1/0
`module (F3 Series)
`
`Cisco Nexus 7000 6-port
`100-Gigabit Ethernet CPAK 1/0
`module (F3 Series)
`
`Cisco Nexus 7700 Enhanced
`48-port 1/10 Gigabit Ethernet
`SFP+ T/0 module (F2e Series)
`
`Enhanced 48-port 1110
`GBASE-T RJ45 module (P2e
`Series)
`
`Enhanced 48-port 1/10 Gigabit
`Ethernet SFP+ I/0 module (F2e
`Series)
`
`48-port 1110 Gigabit Ethernet
`SFP+ T/0 module (F2 Series)
`
`32-port 1110 Gigabit Ethernet
`module (F1 Series)
`
`6.0( 1)
`
`4.1 (2)
`
`6.2(6)
`
`6.2(6)
`
`6.2(6)
`
`6.2( 6)
`
`6.2(10)
`
`6.2(2)
`
`6.1(2)
`
`6.1 (2)
`
`6.0( 1)
`
`5.1(1)
`
`2-port 100-Gigabit Ethernet 1/0 6.1(1)
`module XL (M2 Series)
`
`6-port 40-Gigabit Ethernet 110
`module XL (M2 Series)
`24-port 1 0-Gigabit Ethernet T/0 6.1 (1)
`module XL (M2 Series)
`
`6.1(1)
`
`8-port 10-Gigabit Ethernet 110
`module XL 1
`32-port 1 0-Gigabit Ethernet
`SFP+ I/0 module
`
`5.0(2)
`
`4.0(1)
`
`OL-29671-06
`
`Cisco Nexus 7000 Series NX-OS Release Notes, Release 6.2
`
`CSI-ANI-00128337.000008
`
`

`
`•
`
`System Requirements
`
`Tab/e2
`
`Cisco Nexus 7000 Series Hardware Supported by Cisco NX-OS Software (continued)
`
`Product ID
`
`N7K-M132XP-12L
`
`N7K-M148GS-ll
`
`N7K-M148GS-11L
`
`N7K-Ml48GT-11
`
`N7K-M148GT-11L
`
`N2K-C2248TP-1GE
`
`N2K-C2224TP-1GE
`
`N2K-C2248TP-E
`
`N2K-C2232PP-10GE
`
`N2K-C2232TM
`
`N2K-C2232TM-E
`
`N2K-C2248PQ
`
`N2K-B22HP
`
`Hardware
`
`Minimum Software Release
`
`32-porl 10-Gigabil Ethernet
`SFP+ 1/0 module XL 1
`48-port 1-Gigabit Ethernet SFP 4.1(2)
`1/0 module
`
`5.1(1)
`
`48-port 1-Gigabit Ethernet 1/0
`module XL 1
`48-port 10/100/1000 Ethernet
`1/0 module
`
`48-port 10/10011000 Ethernet
`1/0 module XL 1
`Cisco Nexus 2248TP Fabric
`Extender
`
`Cisco Nexus 2224TP Fabric
`Extender
`
`Cisco Nexus 2224TP Fabric
`Extender
`
`Cisco Nexus 2232PP Fabric
`Extender
`
`Cisco Nexus 2232TM Fabric
`Extender
`
`Cisco Nexus 2232TM Fabric
`Extender
`
`Cisco Nexus 2248PQ Fabric
`Extender
`
`Cisco Nexus B22 Fabric
`Extender for HP
`
`5.0(2)
`
`4.0(1)
`
`5.1(2)
`
`5.2(1)
`
`5.2( 1)
`
`6.1(1)
`
`5.2(1)
`
`6.1( 1)
`
`6.2(2)
`
`6.2(2)
`
`6.2(2)
`
`I. Requires the Cisco Nexus 7010 Scalable I'eature Package license (N7K-C7010-XL) or the Cisco Nexus 7018 Scalable
`Feature Package license (N7K-C7018-XL). depending on the chassis, to enable all XL- capable I/0 modules to operate in XL
`mode.
`
`Cisco Nexus 7000 Series NX-OS Release Notes, Release 6.2
`
`OL-29671-06
`
`CSI-ANI-00128337.000009
`
`

`
`Table 3
`
`FEX Modules Supported by Cisco Nexus 7000 Series Modules
`
`System Requirements
`
`•
`
`Cisco Nexus 7000 Series Module
`
`FEX Module
`
`Minimum Software Release
`6.2(6)
`
`6.2(8)
`
`N2K -C2224 TP-1 GE
`
`N2K-C2248TP-1GE
`
`N2K-C2232PP-1 OGE
`
`N2K-C2232TM
`
`N2K-C2248TP-E
`
`N2K-C2232TM-E
`
`N2K-C2248PQ
`N2K-B22HP1
`N2K-C2224 TP-1 GE
`
`N2K-C2248TP-1 GE
`
`N2K-C2232PP-10GE
`
`N2K-C2232TM
`
`N2K-C2248TP-E
`
`N2K-C2232TM-E
`
`N2K-C2248PQ
`N2K-B22HP1
`
`12-port40-Gigabil Ethernet F3-Series
`QSFP I/0 module (N7K-F312FQ-25) for
`Cisco Nexus 7000 Series switches
`
`24-port Cisco Nexus 7700 F3 Series
`40-Gigabit Ethernet QSFP I/0 module
`(N77-F324FQ-25)
`
`48-port Cisco Nexus 7700 F3 Series
`111 0-Gigahit Ethernet SFP+ I/0 module
`(N77-P348XP-23)
`
`32-port 1 0-Gigabit Ethernet SFP+ I/0
`module (N7K-M132XP-12)
`
`32-port 1 0-Gigabit Ethernet SFP+ T/0
`module (N7K-M132XP-12L)
`
`N2K-C2224 TP-1 GE
`
`6.2(6)
`
`N2K-C2248TP-1 GE
`
`N2K-C2232PP-1 OGE
`
`N2K-C2232TM
`
`N2K-C2248TP-E
`
`N2K-C2232TM-E
`
`N2K-C2248PQ
`
`N2K-B22HP
`
`N2K-C2248TP-1 GE
`
`N2K-C2224 TP-1 GE
`
`5.2(1)
`
`5.2(1)
`
`N2K-C2232PP-1 OGE
`
`N2K-C2232TM
`
`6.1 (1)
`
`N2K-C2248TP-E
`
`N2K-2232TM-E
`
`6.2(2)
`
`N2K-C2248PQ
`
`N2K-B22HP
`
`OL-29671-06
`
`Cisco Nexus 7000 Series NX-OS Release Notes, Release 6.2
`
`CSI-ANI-00128337.00001 0
`
`

`
`•
`
`System Requirements
`
`Table3
`
`FEX Modules Supported by Cisco Nexus 7000 Series Modules (continued)
`
`Cisco Nexus 7000 Series Module
`
`FEX Module
`
`Minimum Software Release
`
`24-port10-Gigabit Ethernet 1/0 M2 Series N2K-C2224TP-1GE
`module XL (N7K-M224XP-23L)
`
`N2K-C2248TP-1GE
`
`6.1 ( 1)
`
`N2K -C2232PP-1 OGE
`
`N2K-C2232TM
`
`N2K -C2248TP-E
`
`N2K-C2232TM-E
`
`6.2(2)
`
`N2K -C2248PQ
`
`N2K-B22HP
`
`48-port 1/10 Gigabit EtherueL SFP+ 1/0 N2K-C2224TP-1GE
`F2 Series module (N7K-F248XP-25)
`
`N2K -C2248TP-1 GE
`
`6.0(1)
`
`N2K -C2232PP-1 OGE
`
`N2K-C2232TM
`
`6.1(1)
`
`N2K -C2248TP-E
`
`N2K-2232TM-E
`
`6.2(2)
`
`N2K-2248PQ
`
`N2K-B22HP
`
`Enhanced 48-port 1/10 Gigabit Ethernet N2K-C2224TP-1GE
`SFP+ I/0 module (F2e Series)
`(N7K-F248XP-25E)
`
`N2K -C2248TP-1 GE
`
`N2K-C2232PP-1 OGE
`
`6.1 (2)
`
`N2K-C2232TM
`
`N2K -C224STP-E
`
`N2K-2232TM-E
`
`6.2(2)
`
`N2K -C2248PQ
`
`N2K-B22IIP
`
`48-port 1/10 Gigabit Ethernet SFP+ 1/0 N2K-C2224TP-1GE
`module (F2e Series) (N77-F248XP-23E) N2K -C2248TP-1 GE
`N2K -C2232PP-1 OGE
`
`6.2(2)
`
`N2K-C2232TM
`
`N2K-C2232TM-E
`
`N2K -C2248PQ
`
`N2K -C2248TP-E
`
`N2K-B22HP
`
`I. FEX server-facing interfaces shonld be confignred in antonegotiate mode. Do not force a specific data rate. See DDTS
`CSCnj84520 for additional information.
`
`Cisco Nexus 7000 Series NX-OS Release Notes, Release 6.2
`
`OL-29671-06
`
`CSI-ANI-00128337.000011
`
`

`
`'· Note
`
`The Cisco Nexus 7000 Enhanced F2 Series 48-port Ill 0 GBASE-T RJ -45 Module (N7K-F248XT-25E)
`does not support Cisco Nexus 2000 Fabric Extenders.
`
`System Requirements
`
`•
`
`Table 4
`
`Service Modules Supported by Cisco Nexus 7000 Series Switches
`
`Service Module
`
`Cisco Nexus 7000 Series Network
`Analysis Module
`
`Product ID
`
`NAM-NX1
`
`Minimum Software Release
`6.2(2)
`
`Table 5
`
`Transceivers Supported by Cisco NX-OS Software Releases
`
`1/0 Module
`N77-F312CK-26
`
`Product ID
`
`Transceiver Type
`
`CPAK -1 OOG-LR4
`
`Cisco 100GBASE-LR4 CPAK
`
`CPAK-1 OOG-SR 10
`
`Cisco 100GRASE-SR10 CPAK
`
`N77-F324FQ-25
`
`QSFP-40G-SR-BD
`
`Cisco 40G BiDi QSFP+
`
`QSFP-40G-SR4
`
`40GBASE-SR4 QSFP+
`
`QSFP-40G-CSR4
`
`40GBASE-CSR4 QSFP+
`
`QSFP-40GE-LR4
`
`40GBASE-LR4 QSFP+
`
`FET-40U
`
`QSFP-H40U-ACUxM
`
`QSFP-4X 1 OG-ACxM
`
`QSFP-H40G-AOCxM
`
`Cisco 40U Fabric Extender
`Transceiver (FET)
`
`40UBASE-CR4 QSFP+ Direct
`Attach Copper Cable Active (7 m,
`10m)
`
`40GBASE-CR4 QSFP+ to 4x
`SFP+ Twin ax Direct Attach
`Copper Breakout Cable Active
`(7 m, 10m)
`
`40GBASE-AOC (Active Optical
`Cable) QSFP Cable ( 1 m. 2m, 3 m,
`5 m, 7 m. 10 m, 15 m)
`
`QSFP-4X l OG-AOCxM 40GBASE-AOC (Active Optical
`Cable) QSFP to 4x10G SFP+
`Breakout Cable ( 1 m, 2 m. 3 m, 5
`m, 7 m, 10m)
`
`WSP-Q40GLR4L
`
`40GBASE-LR4 lite (2km SMF)
`QSFP+
`
`N77-F348XP-23
`
`CWDM-SFP-xxxx1
`DWDM-SFP-xxxx1
`GLC-TE
`
`1 OOOBASE-CWDM
`
`l OOOBASE-DWDM
`
`l OOOBASE-T SFP
`
`Minimum
`Software Version
`
`6.2(6)
`
`6 2(6)
`
`6.2(6)
`
`6.2(6)
`
`6.2( 6)
`
`6.2(6)
`
`6.2(11)
`
`6.2(8)
`
`6.2(8)
`
`6.2(8)
`
`6.2(8)
`
`6.2(10)
`
`6.2(8)
`
`6.2(8)
`
`6.2(10)
`
`OL-29671-06
`
`Cisco Nexus 7000 Series NX-OS Release Notes, Release 6.2
`
`CSI-ANI-00128337.000012
`
`

`
`•
`
`System Requirements
`
`Table 5
`
`Transceivers Supported by Cisco NX-OS Software Releases (continued)
`
`1/0 Module
`
`Product ID
`FET-lOG
`
`SFP-1 OG-AOCxM
`
`Minimum
`Transceiver Type
`Software Version
`Cisco Fabric Extender Transceiver 6.2(6)
`(FET)
`
`llOGBASE-AOC (Active Optical 6.2(1 0)
`Cable) SFP+ Cable (1m, 2m, 3m.
`5 m, 7 m, 10m)
`
`SFP-lOG-SR
`
`SFP-lOG-LR
`
`SFP-lOG-ER
`
`SFP-10G-ZR
`
`lOGBASE-SR SFP+
`
`lOGBASE-LR SFP+
`
`1 OGBASE-ER SFP+
`
`1 OGBASE-ZR SFP+
`
`DWDM-SFP10G-xx.xx
`SFP-10G-LRM4
`SFP-H l OGB-CUxM
`
`SFP-HlOGB-CUxM
`
`SFP-HlOGB-ACUxM
`
`SFP-GE-T
`
`SFP-GE-S
`
`SFP-GE-L
`
`SFP-GE-Z
`
`GLC-LH-SM
`
`GLC-LH-SMD
`
`GLC-SX-MM
`
`lOGBASE-DWDM SFP+
`
`lOGBASE-LRM SFP+
`
`SFP-HlOGB-CUxM Twinax
`Cable Passive ( l m, 3 m, 5 m)
`
`SFP-HlOGC-CUxM Twinax
`Cable Passive (1.5 111, 2111, 2.5 111)
`
`SFP-HlOGB-ACUxM Twinax
`Cable Active (7 111, 10 111)
`
`lOOOBASE-T SFP
`
`1 OOOBASE-SX SFP (DOM)
`
`lOOOBASE-LX/LH SFP (DOM)
`
`1000BASE-ZX SFP (DOM)
`
`1000BASE-LX/LH SFP
`
`lOOOBASE-LX/LH SFP
`
`1 OOOBASE-SX SFP
`
`GLC-SX-MMD
`
`1 OOOBASE-SX SFP
`
`GLC-ZX-SM
`
`lOOOBASE-ZX SFP
`
`GLC-ZX-SMD
`
`lOOOBASE-ZX SFP
`
`GLC-T
`
`GLC-BX-D
`
`GLC-BX-U
`
`1 OOODASE-T SPP
`
`1000BASE-BX10-D
`
`lOOOBASE-BXlO-U
`
`GLC-EX-SMD
`
`1000BASE-EX SFP
`
`6.2(6)
`
`6.2(6)
`
`6.2(6)
`
`6.2(6)
`
`6.2(6)
`
`6.2(8)
`
`6.2(8)
`
`6.2(8)
`
`6.2(8)
`
`6.2(8)
`
`6.2(8)
`
`6.2(8)
`
`6.2(8)
`
`6.2(8)
`
`6.2(8)
`
`6.2(8)
`
`6.2(8)
`
`6.2(8)
`
`6.2(8)
`
`6.2(8)
`
`6.2(8)
`
`6.2(8)
`
`6.2(8)
`
`PET-lOG
`
`Cisco Pabric Extender Transceiver 6.2(8)
`(FET)
`
`N7K-F312FQ-25
`
`QSFP-40G-SR-BD
`
`Cisco 40G BiDi QSFP+
`
`QSFP-40G-SR4
`
`40GBASE-SR4 QSFP+
`
`QSFP-40G-CSR4
`
`40GBASE-CSR4 QSFP+
`
`QSFP-40GE-LR4
`
`40GBASE-LR4 QSFP+
`
`6.2(6)
`
`6.2(6)
`
`6.2(6)
`
`6.2(6)
`
`Cisco Nexus 7000 Series NX-OS Release Notes, Release 6.2
`
`OL-29671-06
`
`CSI-ANI-00128337.000013
`
`

`
`System Requirements
`
`•
`
`Table 5
`
`Transceivers Supported by Cisco NX-OS Software Releases (continued)
`
`1/0 Module
`
`Product ID
`FET-40G
`
`QSFP-H40G-ACUxM
`
`QSFP-4X 1 OG-ACxM
`
`Transceiver Type
`
`Cisco 40G Fabric Extender
`Transceiver (FET)
`
`40GBASE-CR4 QSFP+ Direct
`Attach Copper Cable Active (7 m,
`10m)
`
`40GBASE-CR4 QSFP+ to 4x
`SFP+ Twin ax Direct Attach
`Copper Breakout Cable Active
`(7 m, 10m)
`
`QSFP-H 40G-AOCxM
`
`40GBASE-AOC (Active Optical
`Cable) QSFP Cable (l m. 2m, 3m,
`5 m, 7 m, 10m, 15m)
`QSFP-4X 1 OG-AOCxM 40GBASE-AOC (Active Optical
`Cable) QSFP to 4xlOG SFP+
`Breakout Cable (1 m, 2 m, 3 m,
`5 m, 7 m, 10m)
`
`WSP-Q40GLR4L
`
`40GBASE-LR4 lite (2km SMF)
`QSFP+
`
`N7K-F306CK-25
`
`CPAK-100G-LR4
`
`Cisco 100GBASE-LR4 CPAK
`
`CPAK-100G-SR10
`
`Cisco 100GBASE-SR10 CPAK
`
`Minimum
`Software Version
`6.2(6)
`
`6.2(8)
`
`6.2(8)
`
`6.2(8)
`
`6.2(8)
`
`62(10)
`
`6.2(10)
`
`6.2(10)
`
`N77-F248XP-23E
`
`FET-10G
`
`Cisco Fabric Extender Transceiver 6.2(2)
`(PET)
`
`SFP-1 OG-AOCxM
`
`1 OGBASE-AOC (Active Optical
`Cable) SFP+ Cable ( 1 m, 2 m, 3 m,
`5 m. 7 m, 10 m)
`
`SFP-10G-SR
`
`SFP-10G-LR
`
`SFP-10G-ER
`
`SFP-1 OG-LRM
`SFP-1 OG-ZR 2
`SFP-H10GB-CUxM
`
`SPP-H10GI3-CUxM
`
`SPP-H10GI3-ACUxM
`
`SFP-GE-T
`
`SFP-GE-S
`
`SFP-GE-L
`
`SFP-GE-Z
`
`10GBASE-SR SFP+
`
`10GBASE-LR SFP+
`
`10GBASE-ER SFP+
`
`10GBASE-LRM SFP+
`
`10GBASE-ZR SFP+
`
`SFP-HlOGB-CUx.\1 Twinax
`Cable Passive (1 m, 3m. 5 m)
`
`SPP-H10GC-CUx.\rl Twinax
`Cable Passive (1.5 m, 2m, 2.5 m)
`
`SPP-H10GI3-ACUxM Twinax
`Cable Active (7 m, 10m)
`
`1 OOOBASE-T SFP
`
`1 OOOBASE-SX SFP (DOM)
`
`1 OOOBASE-LX/LH SFP (DOM)
`
`1000BASE-ZX SFP (DOM)
`
`6.2(2)
`
`6.2(2)
`
`6.2(2)
`
`6.2(2)
`
`6.2(2)
`
`6.2(2)
`
`6.2(2)
`
`6.2(2)
`
`6.2(2)
`
`6.2(2)
`
`6.2(2)
`
`6.2(2)
`
`6.2(2)
`
`OL-29671-06
`
`Cisco Nexus 7000 Series NX-OS Release Notes, Release 6.2
`
`CSI-ANI-00128337.000014
`
`

`
`•
`
`System Requirements
`
`Table 5
`
`Transceivers Supported by Cisco NX-OS Software Releases (continued)
`
`1/0 Module
`
`Product ID
`GLC-LH-SM
`
`Transceiver Type
`
`1 OOOBASE-LX/LH SFP
`
`GLC-LH-SMD
`
`1000BASE-LX/LH SFP
`
`GLC-SX-MM
`
`1 OOOBASE-SX SFP
`
`GLC-SX-MMD
`
`1 OOOBASE-SX SFP
`
`GLC-ZX-SM
`
`1000BASE-ZX SFP
`
`GLC-ZX-SMD
`
`1000BASE-ZX SFP
`
`GLC-T
`
`GLC-TE
`
`GLC-BX-D
`
`GLC-BX-U
`
`GLC-EX-SMD
`CWDM -SFP-xxxx1
`
`1 OOOBASE-T SFP
`
`1 UOOBASE-T SFP
`
`1000BASE-BX10-D
`
`1000BASE-BX10-U
`
`1000BASE-EX SFP
`
`1 OOOBASE-CWDM
`
`DWDM-SFPlOG-xx.xx 10GBASE-DWDM SFP+
`I
`
`Minimum
`Software Version
`6.2(2)
`
`6.2(2)
`
`6.2(2)
`
`6.2(2)
`
`6.2(2)
`
`6.2(2)
`
`6.2(2)
`
`6.2(10)
`
`6.2(2)
`
`6.2(2)
`
`6.2(2)
`
`6.2(2)
`
`6.2(2)
`
`6.2(2)
`
`N7K-F248XP-25
`
`DWDM-SFP-xxxx1
`FET-100
`
`1 OOOBASE-DWDM
`
`Cisco Fabric Extender Transceiver 6.0(1)
`(FET)
`
`SFP-100-SR
`
`SFP-10G-LR
`
`SFP-100-ER
`
`SFP-100-LRM
`SFP-100-ZR 2
`SFP-1 OG-AOCxM
`
`SFP-H100B-CUxM
`
`SFP-H 1 OOB-CUxM
`
`SFP-H100B-ACUxM
`
`SFP-OE-T
`
`SFP-GE-S
`
`SFP-OE-L
`
`SFP-GE-Z
`
`GLC-TE
`
`1 OGRASE-SR SFP+
`
`1 OGBASE-LR SFP+
`
`1 OGBASE-ER SFP+
`
`10GBASE-LRM SFP+
`
`10GBASE-ZR SFP+
`
`1 OGBASE-AOC (Active Optical
`Cable) SFP+ Cable
`(1 111, 2 111, 3 111, 5111, 7 111, 10 111)
`
`SFP-HlOGB-CUxM Twinax
`Cable Passive (1 m, 3 111, 5 m)
`
`SFP-H10GC-CUxM Twinax
`Cable Passive (1.5 m, 2111, 2.5 111)
`
`SFP-H10GB-ACUxM Twinax
`Cable Active (7 111, 10 111)
`
`1 OOOBASE-T SFP
`
`1000BASE-SX SFP (DOM)
`
`1000BASE-LX/LII SFP (DOM)
`
`1000BASE-ZX SFP (DOM)
`
`1 OOOBASE-T SFP
`
`GLC-LH-SM
`
`1000BASE-LX/LH SFP
`
`6.0(1)
`
`6.0(1)
`
`6.0(1)
`
`6.0(1)
`
`6.1(1)
`
`6.2(2)
`
`6.0( 1)
`
`6.2(2)
`
`6.0(1)
`
`6.0( 1)
`
`6.0(1)
`
`6.0( 1)
`
`6.0( 1)
`
`6.2(10)
`
`6.0( 1)
`
`Cisco Nexus 7000 Series NX-OS Release Notes, Release 6.2
`
`OL-29671-06
`
`CSI-ANI-00128337.000015
`
`

`
`Table 5
`
`Transceivers Supported by Cisco NX-OS Software Releases (continued)
`
`System Requirements
`
`•
`
`1/0 Module
`
`Product ID
`GLC-LH-SMD
`
`GLC-SX-MM
`
`Transceiver Type
`
`l OOOBASE-LX/LH SFP
`
`l OOOBASE-SX SFP
`
`GLC-SX-MMD
`
`l OOOBASE-SX SFP
`
`GLC-ZX-SM
`
`l OOOBASE-ZX SFP
`
`GLC-ZX-SMD
`
`l OOOBASE-ZX SFP
`
`GLC-T
`
`GLC-BX-D
`
`GLC-BX-U
`
`GLC-EX-SMD
`CWDM-SFP-xxxx1
`
`l OOOBASE-T SFP
`
`l OOOBASE-BX 10-D
`
`lOOOBASE-BXlO-U
`
`l OOOBASE-EX SFP
`
`1 OOOBASE-CWDM
`
`DWDM-SFPIOG-xx.xx 10GBASE-DWDM SFP+
`1
`
`Minimum
`Software Version
`6.0(1)
`
`6.0(1)
`
`6.0(1)
`
`6.0(1)
`
`6.2(2)
`
`6.0(1)
`
`6.0(1)
`
`6.0(1)
`
`6.1(1)
`
`6.0(1)
`
`6.1 (1)
`
`6.0(1)
`
`N7K-F248XP-25E
`
`DWDM-SFP-xxxx1
`FET-lOG
`
`1 OOOBASE-DWDM
`
`Cisco Fabric Extender Transceiver 6.1(2)
`(FET)
`
`SFP-1 OG-SR
`
`SFP-1 OG-LR
`
`SFP-lOG-ER
`
`SFP-10G-LRM
`SFP-10G-ZR 2
`
`SFP-1 OG-AOCxM
`
`SFP-H10GB-CUxM
`
`SFP-H10GB-CUxM
`
`SPP-HlOGD-ACUxM
`
`SFP-GE-T
`
`SFP-GE-S
`
`SFP-GE-L
`
`SFP-GE-Z
`
`lOGBASE-SR SFP+
`
`10GBASE-LR SFP+
`
`I OGRASE-ER SFP+
`
`10GBASE-LRM SFP+
`
`lOGBASE-ZR SFP+
`
`l OGBASE-AOC (Active Optical
`Cable) SFP+ Cable
`( 1 m, 2 m, 3 m, 5 m. 7 m, 10 m)
`SFP-HlOGB-CUx~ Twinax
`Cable Passive (1 m, 3 m, S m)
`
`SFP-H10GC-CUx~ Twinax
`Cable Passive (1.5 m, 2m, 2.5 m)
`
`SPP-HlOGD-ACUxM Twinax
`Cable Active (7 m, 10m)
`
`l OOOBASE-T SFP
`
`lOOOBASE-SX SFP (DOM)
`
`1000BASE-LX/LH SFP lDOM)
`
`1000BASE-ZX SFP (DOM)
`
`GLC-LII-SM
`
`1 OOOBASE-LX/LII SFP
`
`GLC-LH-SMD
`
`1000BASE-LX/LH SFP
`
`GLC-SX-MM
`
`1 OOOBASE-SX SFP
`
`GLC-SX-MMD
`
`1 OOOBASE-SX SFP
`
`6.1(2)
`
`6.1 (2)
`
`6 1 (2)
`
`6.1 (2)
`
`6.1(2)
`
`6.2(2)
`
`6.1(2)
`
`6.2(2)
`
`6.1(2)
`
`6.1(2)
`
`6.1(2)
`
`6.1 (2)
`
`6.1 (2)
`
`6.1(2)
`
`6.1 (2)
`
`6.1(2)
`
`6.1(2)
`
`OL-29671-06
`
`Cisco Nexus 7000 Series NX-OS Release Notes, Release 6.2
`
`CSI-ANI-00128337.000016
`
`

`
`•
`
`System Requirements
`
`Table 5
`
`Transceivers Supported by Cisco NX-OS Software Releases (continued)
`
`1/0 Module
`
`Product ID
`GLC-ZX-SM
`
`Transceiver Type
`
`1 OOOBASE-ZX SFP
`
`GLC-ZX-SMD
`
`1000BASE-ZX SFP
`
`GLC-T
`
`GLC-TE
`
`GLC-BX-D
`
`GLC-BX-U
`
`1 OOOBASE-T SFP
`
`1 OOOBASE-T SFP
`
`1000BASE-BX10-D
`
`1000BASE-BX10-U
`
`1000BASE-EX SFP
`
`GLC-EX-SMD
`CWDM-SFP-xxxx1
`DWDM-SFPIOG-xx.xx 10GBASE-DWDM SFP+
`I
`
`1 UOOBASE-CWDM
`
`DWDM-SFP-xxxx 1
`
`1 OOOBASE-DWDM
`
`N7K-F132XP-15
`
`SFP-10G-SR
`
`10GBASE-SR SFP+
`
`GLC-TE
`
`SFP-10G-LR
`SFP-1 OG-ER 2
`SFP-10G-LRM
`SFP-10G-ZR 2
`SFP-1 OG-AOCxM
`
`SFP-HlOGB-CUxM
`
`SFP-HlOGB-CUxM
`
`SFP-H l OGB-ACUxM
`
`SFP-GE-T
`
`SI'P-GE-S
`
`SFP-GE-L
`
`SFP-GE-Z
`
`GLC-LH-SM
`
`GLC-SX-MM
`
`GLC-ZX-SM
`
`1 OOOBASE-T SFP
`
`10GBASE-LR SFP+
`
`10GBASE-ER SFP+
`
`10GBASE-LRM SFP+
`
`lOGBASE-ZR SFP+
`
`1 OGBASE-AOC (Active Optical
`Cahle) SFP+ Cahle
`(1 m, 2m, 3m, 5 m, 7 m, 10m)
`
`SFP-HlOGB-CUxM Twinax
`Cahle Passive (1 m. 3m, 5 m)
`
`SFP-HlOGC-CUxM Twinax
`Cahle Passive (1.5 m, 2m. 2.5 m)
`
`SFP-H10GB-ACUxM Twinax
`Cahle Active (7 m, 10m)
`
`1 OOOBASE-T SFP
`
`1 OOODASE-SX SPP (DOM)
`
`1000BASE-LX/LH SFP (DOM)
`
`1000BASE-ZX SFP (DOM)
`
`1000BASE-LX/LH SFP
`
`1 OOODASE-SX SPP
`
`1 OOOBASE-ZX SFP
`
`GLC-ZX-SMD
`
`1000BASE-ZX SFP
`
`GLC-T
`
`GLC-LH-SMD
`
`GLC-SX-MMD
`
`1 OOOBASE-T SFP
`
`1 OOORASE-T "X IT B SFP
`
`1 OOOBASE-SX SFP
`
`Minimum
`Software Version
`6.1(2)
`
`6.1(2)
`
`6.1(2)
`
`6.2(10)
`
`6.1(2)
`
`6.1(2)
`
`6.1(2)
`
`6.1(2)
`
`6.1(2)
`
`6.1(2)
`
`5.2( 1)
`
`6.2(10)
`
`5.1 (1)
`
`5.1 (1)
`
`5.1(1)
`
`6.1(1)
`
`6.2(2)
`
`5.1(1)
`
`6.2(2)
`
`5.1 (1)
`
`5.1(1)
`
`5.1(1)
`
`5.1(1)
`
`5.1 (1)
`
`5.1(1)
`
`5.1 (1)
`
`5.1(1)
`
`6.2(2)
`
`5.1 (1)
`
`5.2(1)
`
`5.2(1)
`
`Cisco Nexus 7000 Series NX-OS Release Notes, Release 6.2
`
`OL-29671-06
`
`CSI-ANI-00128337.000017
`
`

`
`Table 5
`
`Transceivers Supported by Cisco NX-OS Software Releases (continued)
`
`System Requirements
`
`•
`
`1/0 Module
`
`Product ID
`GLC-EX-SMD
`
`Transceiver Type
`
`l OOOBASE-EX -SFP
`
`DWDM-SFP10G-xx.xx 10-GBASE-DWDM SFP+
`1
`
`N7K-M108X2-12L SFP-1 OG-SR3
`SFP-10G-LR3
`SFP-1 OG-LRM3
`SFP-H10GB-CUxM3
`
`CVR-X2-SFP10G
`
`X2-10GB-CX4
`
`X2-10GB-ZR
`
`X2-10GB-LX4
`
`X2-10GB-SR
`
`X2-10GD-LR
`
`1 OGBASE-SR SFP+
`
`10GBASE-LR SFP+
`
`10GBASE-LRM SFP+
`
`SFP-H10GB-CUx:\1 Twinax
`Cable Passive (1 m, 3 m. 5 m)
`
`OneX Couverler Module - X2 lo
`SFP+ Adapter
`
`lOGBASE-CX4 X2
`
`lOGBASE-ZR X2
`
`10GBASE-LX4 X2
`
`10GBASE-SR X2
`
`10GDASE-LRX2
`
`X2-10GB-LRM
`
`10GBASE-LRM X2
`
`X2-10GB-ER
`DWDM-X2-xx.xx= 1
`SFP-GE-S
`
`1 OG BASE-ERX2
`
`10GBASE-DWDM X2
`
`1 OOOBASE-SX
`
`N7K-M148GS-11
`
`GLC-SX-MM
`
`SFP-GE-L
`
`GLC-LH-SM
`
`SFP-GE-Z
`
`GLC-ZX-SM
`
`GLC-EX-SMD
`
`GLC-ZX-SMD
`
`GLC-T
`
`SFP-GF-T
`
`GLC-BX-D
`
`GLC-BX-U
`
`GLC-SX-MMD
`
`GLC-LH-SMD
`CWDM-SFP-xxxx1
`DWDM-SFP-xxxx1
`
`l OOOBASE-LX
`
`lOOOBASE-ZX
`
`1 OOOBASE-EX SFP
`
`lOOOBASE-ZX SFP
`
`lOOOBASE-T
`
`l OOOBASE-BX 10-D
`
`l OOOBASE-BX1 0-U
`
`l OOOBASE-SX
`
`l OOOBASE-LX
`
`l OOOBASE-CWDM
`
`1 OOOBASE-DWDM
`
`N7K-M148GS-11L SFP-GE-S
`
`1 OOOBASE-SX
`
`GLC-SX-MM
`
`Minimum
`Software Version
`6.1(1)
`
`6.1(1)
`
`5.2(3a)
`
`5 .2(3a)
`
`5.2(1)
`
`5 .2(1)
`
`5.2(1)
`
`5.1(1)
`
`5.1(1)
`
`5.1(1)
`
`5.0(2a)
`
`5.0(2a)
`
`5.0(2a)
`
`5.0(2a)
`
`5.0(2a)
`
`4.1(2)
`
`4.1 (2)
`
`4.1(2)
`
`4.1(2)
`
`4.1(2)
`
`4.1(2)
`
`6.2(2)
`
`6.2(2)
`
`4.2(1)
`
`4.2(1)
`
`5.2(1)
`
`5.2(1)
`
`5 .2(1)
`
`5.2(1)
`
`4.2(1)
`
`4.2(1)
`
`5.0(2a)
`
`5.0(2a)
`
`OL-29671-06
`
`Cisco Nexus 7000 Series NX-OS Release Notes, Release 6.2
`
`CSI-ANI-00128337.000018
`
`

`
`•
`
`System Requirements
`
`Table 5
`
`Transceivers Supported by Cisco NX-OS Software Releases (continued)
`
`1/0 Module
`
`N7K-M132XP-12
`
`Product ID
`SFP-GE-L
`
`GLC-LH-SM
`
`SFP-GE-Z
`
`GLC-ZX-SM
`
`GLC-EX-SMD
`
`GLC-ZX-SMD
`
`GLC-T
`
`SFP-GE-T
`
`GLC-BX-D
`
`GLC-BX-U
`
`GLC-SX-MMD
`
`GLC-LII-SMD
`
`GLC-TE
`DWDM-SFP-xxxx1
`CWDM-SFP-xxxx1
`FET-10G
`
`Transceiver Type
`
`1 OOOBASE-LX
`
`1000BASE-ZX
`
`lOOOBASE-EX SFP
`
`lOOOBASE-ZX SFP
`
`1 OOOBASE-T
`
`1 OOOBASE-BXl 0-D
`
`1000BASE-BX1 0-U
`
`1 OOOBASE-SX
`
`1000BASE-LX
`
`1 OOOBASE-T SFP
`
`1 OOOBASE-DWDM
`
`1000BASE-CWDM
`
`Minimum
`Software Version
`5.0(2a)
`
`5.0(2a)
`
`5.0(2a)
`
`5.0(2a)
`
`6.2(2)
`
`6.2(2)
`
`5.0(2a)
`
`5.0(2a)
`
`5.2(1)
`
`5.2(1)
`
`5.2(1)
`
`5.2(1)
`
`6.2(10)
`
`5.0(2a)
`
`5.0(2a)
`
`Cisco Fabric Extender Transceiver