Aventail
`CONNECT
`
`v8.0Vv261
`
`
`
`Ueer‘s Guide
`
`Windows
`
`Aventail
`
`Petitioner Apple Inc. - EX. 1010, Cover
`
`Petitioner Apple Inc. - Ex. 1010, Cover
`
`

`

`AVENTAIL CONNECT 3.01/2.51 USER’S GUIDE
`
`© 1996-1999 Aventail Corporation. All rights reserved.808 Howell Street, Second FloorSeattle, WA 98101USA
`
`http://www.aventail.com/
`
`TRADEMARKS AND COPYRIGHTS
`
`Aventail is a registered trademark of Aventail Corporation. AutoSOCKS, Internet Policy Manager, Aventail VPN, Aventail VPN Client, Aventail ExtraNet Center, and Aventail ExtraNet Server are trademarks of Aventail Corporation.Socks5Toolkit is a trademark of NEC Corporation. MD4 Message-Digest Algo-rithm and MD5 Message-Digest Algorithm are trademarks of RSA Data Security, Inc. Microsoft, MS, Windows, Windows 95, Windows 98, and Windows NT are either registered trademarks or trademarks of Microsoft Corporation. RealAudio is a trademark of RealNetworks. SecurID, SoftID, ACE/Server, and SDTI are either registered trademarks or trademarks of Security Dynamics Technologies, Inc.Other product names mentioned in this manual may be trademarks or registered trademarks of their respective companies and are the sole property of their respective manufacturers.© 1995-1996 NEC Corporation. All rights reserved.© 1990-1992 RSA Data Security, Inc. All rights reserved.© 1996 Hi/fn Inc., including one or more U.S. patents: 4701745, 5016009, 5126739, and 5146221, and other patents pending.© 1996-1997 Consensus Development Corporation. All rights reserved.
`
`Aventail Connect 3.01/2.51 User’s Guide • i
`
`Petitioner Apple Inc. - Ex. 1010, p. i
`
`Printed in the United States of America.
`

`

`Table of Contents
`
` Table of Contents
`
`INTRODUCTION
`
`About This Document . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3Document Organization. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3Document Conventions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4Aventail Technical Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5About Aventail Corporation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
`
`USER’S GUIDE
`
`Start and Close Aventail Connect . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6Enter Authentication Credentials. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8Username/Password and CHAP Authentication. . . . . . . . . . . . . . . . . 9CRAM Authentication . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10Integration with SoftID. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10SSL Authentication. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11System Menu Commands. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13Close. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13Hide Icon. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14Help. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14About. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14Credentials . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14Configuration File . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16Utilities. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17Config Tool . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17Logging Tool. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18S5 Ping. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19Secure Extranet Explorer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
`
`GLOSSARY
`INDEX
`
`Aventail Connect 3.01/2.51 User’s Guide • ii
`
`Petitioner Apple Inc. - Ex. 1010, p. ii
`
`Trademarks and Copyrights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . i
` . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
`. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
`

`

` Introduction
`
`Introduction
`
`Welcome to the Aventail Connect 3.01/2.51 secure Windows client for 16- and 32-bit Windows applications. The client component of the Aventail ExtraNet Center, Aventail Connect is a secure proxy client based on SOCKS 5, the IETF standard for authenticated firewall traversal. Aventail Connect delivers enhanced security and simplifies SOCKS deployment for users and network managers.Aventail Connect redirects WinSock calls and reroutes them based upon a set of routing directives (rules) assigned when Aventail Connect is configured. Aventail Connect is designed to run transparently in the background as you work in any TCP/IP applications. (For more information about WinSock, TCP/IP, and general network communications, see “Getting Started.”)On larger networks, Aventail Connect can address multiple SOCKS v5 servers based on end destination and type of service. This feature enables network administrators to effectively monitor and direct network traffic.Aventail Connect is a proxy client, but when used with SSL it provides the ability to encrypt inbound or outbound information.Features of Aventail Connect:•Aventail Connect supports X.509 client certificates for strong authenti-cation with SSL (when encryption is enabled)•Automated Customizer utility simplifies client configuration, distribution, and installation •SSL compression detects low bandwidth connections and compresses encrypted data (when encryption is enabled)•Secure Extranet Explorer (via
` icon on desk-top) allows users to securely access Windows or SMB hosts over an extranet connection (Windows 95, Windows 98, and Windows NT 4.0 only) •Supports WinSock 2.0 (LSP) applications in Windows 98, and Windows NT 4.0, and WinSock 1.1 and WinSock 2.0 applications in Windows 95•Supports WinSock 1.1 applications in Windows 3.1, Windows for Work-groups 3.11, and Windows NT 3.51•MultiProxy feature allows you to use a SOCKS server or an HTTP proxy to control outbound access•Allows the use of port ranges for redirection rules•Provides integration with SoftID™ and SecurID™ tokens•Provides automated installation and uninstallation•Credential cache timeout feature allows administrators to specify when credentials expire•Provides optional password protection for configuration files•Supports both SOCKS v4 and SOCKS v5 (RFC 1928 and RFC 1929) standards
`
`Extranet Neighborhood
`
`Aventail Connect 3.01/2.51 User’s Guide • 1
`
`Petitioner Apple Inc. - Ex. 1010, p. 1
`
`

`

`Introduction
`
`•Enables network redirection through successive extranet (SOCKS) servers•Includes a logging utility to troubleshoot problems with network connec-tions•Includes a Configuration wizard for simplified step-by-step creation of configuration files•Allows internal network connections to pass through without interfer-ence•Supports multiple authentication methods including SOCKS v4 identifi-cation, username/password, CHAP, CRAM, HTTP Basic (username/password), and SSL 3.0.
`
`SEE ALSO: For more information on the differences
`between Aventail Connect 3.01 and Aven-
`tail Connect 2.51, see “What Does Aventail
`Connect Do?” in the Administrator’s Guide.
`
`NOTE: Not all versions of Aventail Connect have encryption
`enabled. For more information, see your network admin-
`istrator.
`
`Aventail Connect 3.01/2.51 User’s Guide • 2
`
`Petitioner Apple Inc. - Ex. 1010, p. 2
`
`

`

`Introduction
`
`ABOUT THIS DOCUMENT
`User’s Guide
`
` provides basic information about Aventail Connect. It includes entry-level data for end users. This information is also available via Aventail Connect Help and the Aventail Web site athttp://www.aventail.com/content/products/docs/
`
`DOCUMENT ORGANIZATION
`User’s Guide
`Utilities Ref-
`erence Guide
`. The
`User’s Guide
` describes screen displays and features that users may encounter while running Aventail Connect on their client workstations.The
` describes the Aventail Connect system menu commands and utility programs. It contains detailed information about using the S5 Ping and the Logging Tool utilities, and Extranet Neighborhood/Secure Extra-net Explorer (SEE).The document concludes with the
`
`Utilities Reference Guide
`
`Glossary
`
`Aventail Connect 3.01/2.51 User’s Guide • 3
`
`Petitioner Apple Inc. - Ex. 1010, p. 3
`
`This
`.
`This document is divided into two main sections:
` and
`.
`

`

`Introduction
`
`DOCUMENT CONVENTIONS
`
`The following typographic conventions are used in this document. Exceptions may be made for online material; for instance, italics may be difficult to read online.ConventionUsageCourier fontFilenames, extensions, directory names, keynames, and pathnames.Command-line commands, options, and portions of syntax that must be typed exactly as shown.
`
`Bold
`
`Italic
`
`Edit…
`support@aventail.com
`buttons), e-mail addresses (
`www.aventail.com
`), URLs, (
`165.121.6.26
`), and IP addresses (
`
`Placeholders that represent information the user must insert.
`
`SEE ALSO: A reference to additional useful information.
`
`NOTE:
`
`Information the user should be aware of to increase
`understanding and/or efficiency of the software.
`
`CAUTION: An operational item that the user should be aware of to
`avoid a network policy/software conflict, or lapse, which
`may create a MINOR security flaw.
`
`WARNING: An operational item that the user should be aware of to
`avoid a network policy/software conflict, or lapse, which
`may create a SERIOUS security flaw.
`
`Aventail Connect 3.01/2.51 User’s Guide • 4
`
`Petitioner Apple Inc. - Ex. 1010, p. 4
`
` Dialog box controls (
`).
`

`

`Introduction
`
`AVENTAIL TECHNICAL SUPPORT
`
`Contact Aventail Technical Support if you have questions about installation, con-figuration, or general usage of Aventail Connect. Refer to the Aventail Support Web site, at
`
`http://www.aventail.com/index.phtml/support/
`online_support.phtml
`http://www.aventail.com/index.phtml?page_id=03110000
`
`User’s Guide
`
`, for the latest tech-nical notes and information. Refer to the readme.txt documentation for addi-tional information not included in the
`.Aventail Technical Support:Web site:
`
`http://www.aventail.com/index.phtml/support/index.phtml
`support@aventail.com
`
`Phone: 206.215.0078Fax: 206.215.1120
`
`ABOUT AVENTAIL CORPORATION
`
`Aventail Corporation is the leading vendor of extranet software. Its extranet solu-tions allow organizations to secure their networked communications and man-age their employees’ access to the Internet. Building an extranet gives organizations the ability to dynamically create a private communication or data channel over the Internet. Aventail’s adherence to open security standards sim-plifies extranet deployment, enables interoperability, and leverages corporations’ existing network investments. Its extranet solutions allow companies to extend the reach of their corporate extranets to customers, partners, remote offices, and worldwide employees.Aventail Corporation808 Howell Street, Second FloorSeattle, WA 98101Phone:206.215.1111Fax:206.215.1120http://www.aventail.com/
`
`info@aventail.com
`
`An aventail is a piece of chainmail armor worn around the neck area. In the 14th century, knights wore an aventail to protect themselves while in combat. Today, Aventail continues the tradition of protection by allowing organizations to securely communicate over the Internet.
`
`Aventail Connect 3.01/2.51 User’s Guide • 5
`
`Petitioner Apple Inc. - Ex. 1010, p. 5
`
`, or the Aventail Knowledge Base, at
`E-mail:
`

`

`User’s Guide
`
` User’s Guide
`
`User’s Guide
`
`For outbound traffic, Aventail Connect automatically routes appropriate network traffic from a WinSock-compatible TCP/IP application such as an e-mail program or a Web browser to a SOCKS-based server. (WinSock is a Windows TCP/IP interface that connects a Windows PC to the Internet.) The extranet (SOCKS) server then sends the traffic to the Internet or the network. Your network admin-istrator defines routing rules for this traffic.This
` is designed to familiarize you with aspects of the Aventail Connect interface. Because Aventail Connect is designed to run transparently in the background, in most cases you will interact with Aventail Connect only when it prompts you to enter authentication information for connections to resources secured by an Aventail ExtraNet Server. You may also occasionally need to start and close Aventail Connect, although network administrators often configure it to run automatically at startup.If you have questions about how Aventail Connect is running on your system, contact your network administrator. Details about other Aventail Connect com-mands and utilities are described in the
`
`Administrator’s Guide
`. You might find the “Getting Started” section helpful.
`
`START AND CLOSE AVENTAIL CONNECT
`
`Because network administrators often set up Aventail Connect to run minimized at startup, you may never need to actually launch the Aventail Connect applica-tion. When Aventail Connect starts, it loads a default configuration file. This file contains the rules Aventail Connect uses to properly route network traffic to and from your individual workstation.Aventail Connect may prompt you at startup to select a configuration file. If you are unsure of which configuration file to use, contact your network administrator.Closing Aventail Connect may limit access to certain remote hosts or prevent you from using certain WinSock applications. Before closing Aventail Connect, check with your network administrator.
`
`To start Aventail Connect
`
`Aventail Connect | Aventail Connect
`
`.-OR-•Windows 3.1, Windows for Workgroups 3.11, or Windows NT 3.51: In the Aventail Connect program group, double-click the
`
`Aventail Connect
` pro-gram icon.
`
`Start | Programs |
`
`Aventail Connect 3.01/2.51 User’s Guide • 6
`
`Petitioner Apple Inc. - Ex. 1010, p. 6
`
`•Windows 95, Windows 98, and Windows NT 4.0: Select
`

`

`User’s Guide
`
`Aventail Connect
`
` icon indicating that Aventail Connect is running in the background. In Windows 95, Windows 98, and Windows NT 4.0, this icon is located in the system tray on the taskbar.
`
`To close Aventail Connect
`
`Aventail Connect
`•Windows 95, Windows 98, and Windows NT 4.0: In the system tray on the taskbar, right-click the minimized
` icon to display the Aventail System menu, and click
`
`Close
`
`.-OR-•Windows 3.1, Windows for Workgroups 3.11, or Windows NT 3.51: Click the minimized
`
`Aventail Connect
`Close
` icon to display the Windows System menu, and click
`
`NOTE: The availability of the Help, Credentials, Configuration
`File, Config Tool, Logging Tool, and S5 Ping com-
`mands depends on whether or not your network has
`included them in your Aventail Connect installation
`package. For more information, refer to “System Menu
`Commands” and “Utilities.”
`
`Aventail Connect 3.01/2.51 User’s Guide • 7
`
`Petitioner Apple Inc. - Ex. 1010, p. 7
`
`You will see a minimized
`.
`

`

`ENTER AUTHENTICATION CREDENTIALS
`
`User’s Guide
`
`NOTE: Not all versions of Aventail Connect have encryption
`enabled. For more information, contact your network
`administrator.
`
`Most extranet (SOCKS) servers require you to enter authentication credentials before you are granted access to them. If you try to connect to resources through a secure extranet server, Aventail Connect may display a dialog box asking you to enter authentication credentials. (For some types of authentication methods, your input is not required.) Credentials can be as simple as your user-name or password, or as elaborate as a client certificate plus username and password. Your network administrator assigns credentials to users.Aventail Connect supports the following authentication protocols:•Username/Password•Challenge Handshake Authentication Protocol (CHAP)•Challenge Response Authentication Method (CRAM)•Secure Sockets Layer (SSL)•SOCKS 4 Identification•HTTP Basic (username/password)Aventail Connect also supports X.509 client certificates with SSL.Once you enter your credentials, Aventail Connect will save them in memory. This is known as
`
`SEE ALSO: To read more about these protocols, see
`"Manage Authentication Modules" in the
`Administrator’s Guide.
`
`memory caching
`
`. Memory caching stores the credentials for the current session only. When you restart Aventail Connect or Windows, the memory cache is flushed. If you reconnect to a resource requiring access through an extranet server, you must again enter your credentials as prompted. The following section explains how to authenticate using these modules: User-name/Password, CHAP, CRAM, SSL authentication, and client certificates. SOCKS v4 identification does not require user interaction and therefore is not covered in this guide.
`
`Aventail Connect 3.01/2.51 User’s Guide • 8
`
`Petitioner Apple Inc. - Ex. 1010, p. 8
`
`

`

`USERNAME/PASSWORD AND CHAP AUTHENTICATION
`
`To enter authentication credentials
`
`User’s Guide
`
`If the secure extranet server to which you are connecting uses Username/Pass-word or CHAP authentication, you will see a dialog box similar to the following:1.In the
`
`NOTE:
`
`If you do not know what to enter in the dialog box fields,
`check with your network administrator.
`
`Username
` box, type your username.Press the TAB key to move to the next field, or click in the
`Password
`
`Password
`
` box to place the insertion point. Be sure to type your username and password accu-rately.2.In the
` box, type your password.Your password is concealed as you type it; it displays on-screen as a series of asterisk (*) characters.3.Under "Credential Caching," use the default option,
`, your credentials are sent to the secure extranet server and if they are accepted, the connection will continue.If your credentials are refused by the server, the application will display an alert stating that the connection could not be established. Try the transaction again, reentering your username/password. If problems persist, contact your network administrator.
`
`Cache for this session
`OK
`. Click
`.When you click
`OK
`
`Aventail Connect 3.01/2.51 User’s Guide • 9
`
`Petitioner Apple Inc. - Ex. 1010, p. 9
`
`Username/Password and CHAP authentication use similar dialog boxes.
`

`

`CRAM AUTHENTICATION
`
`User’s Guide
`
`In Aventail Connect, the CRAM authentication module is used to support chal-lenge response authentication systems such as SecurID and other token-based authentication systems. The SecurID system uses a two-part process comprised of a user's Personal Identification Number (PIN) and a token that generates a time-based code. This client code mirrors the Pseudo Random Number (PRN), which typically changes each minute, generated by the server.There are several ways to use the PIN-token process. The specific method you use will be determined by your network administrator.Subauthenticated through SSL, SecurID's CRAM provides an additional layer of security, plus session resumption capabilities to mobile/remote users.
`
`NOTE: Without SSL subauthentication, users will be required to
`log on every time they need to access the corporate
`intranet, extranet, or Internet.
`
`INTEGRATION WITH SOFTID
`
`In addition to the Security Dynamics SecurID tokens, Aventail Connect supports the Security Dynamics SoftID token system. SoftID is similar to SecurID, except that SecurID uses a hand-held token while SoftID uses a “virtual” token that you view on-screen. When authenticating with SecurID, a physical token displays the six-digit Pseudo Random Number (PRN). When authenticating with SoftID, the PRN appears in the on-screen token. With both the SecurID and SoftID tokens, the PRN typically changes each minute. You can install multiple SoftID tokens, although typically you will have just one.The following platforms support SoftID:•Windows 98•Windows NT 4.0•Windows 95 (See note below)SoftID is not supported by Windows 3.1, Windows for Workgroups 3.11, or Win-dows NT 3.51.For Aventail Connect to integrate with SoftID on the Windows 95 and Windows 98 operating systems, you must install a Security Dynamics patch. This patch consists of three files: stauto.dll, stauto16.dll, and stauto.dll. You can download the patch from:http://www.securid.com/products/datasheets/sofidata.html
`
`NOTE: When running Aventail Connect 2.51 on the Windows
`95 operating system, SoftID is compatible with 32-bit
`applications only. When running Aventail Connect 3.01
`on Windows 95, SoftID is compatible with both 16- and
`32-bit applications.
`
`Aventail Connect 3.01/2.51 User’s Guide • 10
`
`Petitioner Apple Inc. - Ex. 1010, p. 10
`
`.
`

`

`User’s Guide
`
`With SoftID integration, the Aventail Connect CRAM module can automatically “read” the PRN from the on-screen SoftID token, eliminating the need for you to manually enter the PRN. Aventail Connect determines whether or not you are running SoftID on your computer. If you are authenticating with CRAM and Aven-tail Connect determines that you are running SoftID, Aventail Connect will dis-play a dialog box asking if you want to use the SoftID token to authenticate. (If you have multiple SoftID tokens on your computer, the Aventail Connect CRAM module will prompt you to specify which token you want to use.) If you choose to authenticate with SoftID, Aventail Connect will “read” the six-digit PRN and auto-matically enter it for you; however, you must still manually enter your four-digit PIN. If you choose not to authenticate with SoftID, you will be prompted to enter the six-digit PRN that is visible on your SecurID token.The Aventail Connect CRAM module will store your username and the serial number of your SoftID token in the credential cache, eliminating the need for you to enter this information every time you authenticate with SoftID.If you authenticate with SoftID, you can also use a password for added security, if desired. If you choose to protect your token with an optional password, you must enter the correct password before the SoftID user interface is displayed; the password “unlocks” the SoftID user interface so you can view the SoftID token on-screen.
`
`SSL AUTHENTICATION
`
`authentication certificates
`SSL authentication, originally developed by Netscape for secure Web communi-cations, uses
`
` to identify authorized users. A certificate is essentially an electronic “statement” that verifies the integrity of a connection. When you attempt to connect to an SSL server, Aventail Connect may display the SSL certificate sent by the server.This may not always be the case, depending on how your network administrator has configured the system.
`
`SEE ALSO: For more information on authentication or
`SSL certificates, contact your network
`administrator, or go to
`http://www.aventail.com.
`
`To accept an SSL certificate
`
`Because anyone can issue a certificate that says anything, accept certificates only from trusted sources. Otherwise, the information you receive may be invali-dated. If you have any concerns about whether or not to accept a certificate, talk with your network administrator.1.When you see a trusted certificate display on-screen, click
`
`Accept
`.If you click
`Reject
`Next
`Accept
`, you see a second “page” of the certificate data with the same
`Reject
`
`Aventail Connect 3.01/2.51 User’s Guide • 11
`
`Petitioner Apple Inc. - Ex. 1010, p. 11
`
`, your connection will not be established. If you click
` and
` commands.
`

`

`User’s Guide
`
`Accept
`Username/Password
`may
`
` dialog box for you to fill in. The User-name/Password dialog will only display if sub-authentication is being negoti-ated. With SSL authentication, the network administrator has the additional option of requiring you to perform a second (sub) level of authentication.2.In the
`
`Username
` box, type your username.Press the TAB key to move to the next field, or click in the
`Password
`
`Password
`
` box to place the insertion point. Be sure to type your username and password accu-rately.3.In the
` box, type your password.Your password is concealed as you type it; it displays on-screen as a series of asterisk (*) characters.4.Under “Credential Caching,” use the default option,
`
`Cache for this session
`OK
`. Click
`.When you click
`OK
`, your credentials are sent to the secure extranet server and if they are accepted, you will continue your processing without hindrance.
`
`Aventail Connect 3.01/2.51 User’s Guide • 12
`
`Petitioner Apple Inc. - Ex. 1010, p. 12
`
`If you click
`, the certificate is accepted as valid and Aventail Connect
` display a
`

`

`SYSTEM MENU COMMANDS
`
`Even though Aventail Connect requires little to no interaction with the user, there are commands on the Aventail Connect System menu. To display the System menu, right-click the
`
`Aventail Connect
` icon in the system tray on the taskbar (Windows 95, Windows 98, and Windows NT 4.0) or click the minimized
`tail Connect
` icon (Windows 3.1, Windows for Workgroups 3.11, or Windows NT 3.51).
`
`User’s Guide
`
`Aven-
`
`Aventail Connect System Menu Commands
`
`Aventail Connect
`
`This command closes Aventail Connect. Exiting Aventail Connect may limit access to certain remote hosts or prevent you from using certain WinSock appli-cations.Menu CommandFunctionCloseCloses Aventail Connect.Hide IconHides the
`
` icon from view. Not available in Windows 95, Windows 98, and Windows NT 4.0.HelpAccesses Help.AboutDisplays Aventail Connect
` box.CredentialsDisplays authentication credentials.Configuration FileSelects a new configuration file via
`
`About
`
`Startup Options
`
`NOTE: Not all installations of Aventail Connect include the
`optional Hide Icon, Help, Credentials, and Configura-
`tion File commands. These components are available
`only when network administrators include them in a cus-
`tom setup package. For more information, contact your
`network administrator.
`
`CLOSE
`
`Aventail Connect 3.01/2.51 User’s Guide • 13
`
`Petitioner Apple Inc. - Ex. 1010, p. 13
`
`Each of the commands is discussed below.
` dialog box.
`

`

`User’s Guide
`
`HIDE ICON
`Aventail Connect
`
` icon from view (Windows 3.1, Win-dows for Workgroups 3.11, and Windows NT 3.51 only). Aventail Connect will run in the background
`
`. The Hide Icon command is not available in Windows 95,
`Windows 98, and Windows NT 4.0
`
`HELP
`
`ABOUT
`About
`
` box, which includes Aven-tail Connect software copyright notification, version information, and so on. Clicking
`More
` displays a list of files used by the current version of Aventail Con-nect.
`
`CREDENTIALS
`
`Manage Credentials
`Credentials
` dialog box. The availability of the
`
` command depends on whether or not your network administra-tor has included it in your Aventail Connect installation package.Credentials include the information (such as username/password) that you enter when establishing a connection to an extranet (SOCKS) server requiring user authentication. (Aventail Connect prompts you with an authentication dialog box.) As long as your credentials are in memory, you can establish connections to associated extranet servers without needing to reenter your authentication information.You cannot edit credential data fields; you can, however, delete individual cre-dential entries. Aventail Connect will prompt you to enter updated authentication information when you reestablish a connection to the associated extranet server.
`
`Aventail Connect 3.01/2.51 User’s Guide • 14
`
`Petitioner Apple Inc. - Ex. 1010, p. 14
`
`This command hides the
`.
`This command accesses Aventail Connect Help.
`This command displays the Aventail Connect
`This command displays the
`

`

`User’s Guide
`
`NOTE: You cannot edit the “AUTHINFO” entries in the Manage
`Credentials dialog box. This information is for diagnos-
`tic purposes only.
`
`To delete a credential entry
`
`Delete authentication credentials when they are no longer correct. After the cre-dentials are deleted, you will be prompted to reenter them the next time you con-nect to the associated extranet server.•Select the credential entry you want to delete and click
`
`Delete
`. This deletes the credential information.
`To exit the Manage Credentials dialog box
`
` to close the dialog box without accepting any changes you might have entered.FieldDefinitionSOCKS ServerExtranet (SOCKS) server name.User NameUser name for the extranet server.MethodAuthentication method.
`
`OK
`
`to accept changes to the credentials and close the dialog box.-OR-•Click
`
`Cancel
`
`NOTE: Clicking Apply saves changes but keeps the dialog box
`open so you can keep working.
`
`Aventail Connect 3.01/2.51 User’s Guide • 15
`
`Petitioner Apple Inc. - Ex. 1010, p. 15
`
`•Click
`

`

`CONFIGURATION FILE
`Aventail Con-
`nect
`Startup Options
`
`User’s Guide
`
`To load a configuration file
`
`Browse
`OK
` button), and then click
`
`Automatically start...
`
`Check with your network administrator before making any changes to the config-uration. •Select the configuration file you want to load (use the
`.•If you want Aventail Connect to start automatically with your most recent choice of configuration file, select the
` check box, and then select the start delay (in seconds).The new configuration file transparently loads into Aventail Connect. You can close and restart Aventail Connect for your change to take effect, or wait the specified length of time if you selected the
`
`Automatically start...
` check box.
`
`Aventail Connect 3.01/2.51 User’s Guide • 16
`
`Petitioner Apple Inc. - Ex. 1010, p. 16
`
`This command lets you load a different configuration file via the
`
` dialog box.
`

`

`User’s Guide
`
`UTILITIES
`Aventail Connect
`
` icon in the system tray on the taskbar (Windows 95, Windows 98, or Windows NT 4.0) or click the minimized
`
`Aventail Connect
` icon (Windows 3.1, Windows for Work-groups 3.11, or Windows NT 3.51).
`Aventail Connect Utility Program Menu Commands
`
`.Each of the commands is discussed below.
`
`NOTE: The Config Tool, Logging Tool, and S5 Ping commands
`are optional components and will only appear when the
`network administrator has included them in an installation
`package. These commands are discussed in detail in the
`Administrator’s Guide.
`
`The Aventail Connect Config Tool creates configuration files that determine how network requests will be routed and which authentication protocols will be enabled. Network administrators generally create configuration files during Aventail Connect installation. The availability of the Config Tool depends on whether or not your network administrator has included it in your Aventail Con-nect installation package.Menu CommandFunctionConfig ToolRuns the Config Tool. (Optional)Logging ToolRuns the Logging Tool. (Optional)S5 PingRuns the ping and traceroute utilities. (Optional)
`
`CONFIG TOOL
`
`Aventail Connect 3.01/2.51 User’s Guide • 17
`
`Petitioner Apple Inc. - Ex. 1010, p. 17
`
`To display the Utility Programs menu, right-click the
`

`

`LOGGING TOOL
`
`The Logging Tool is an optional diagnostic utility that traces Aventail Connect and WinSock activity. When running a trace, the Logging Tool displays errors, warnings, and information as Aventail Connect generates them. You can save the message list to a log file that Aventail Technical Support can use in trouble-shooting technical problems. Log files are also useful when running Aventail Connect for the first time, to ensure that network traffic is being routed properly. The availability of the Logging Tool depends on whether or not your network administrator has included it in your Aventail Connect installation package.
`
`User’s Guide
`
`Aventail Connect 3.01/2.51 User’s Guide • 18
`
`Petitioner Apple Inc. - Ex. 1010, p. 18
`
`

`

`User’s Guide
`
`S5 PING
`
`This command allows you to run the ping and traceroute utilities. The availability of the S5 Ping command depends on whether or not your network administrator has included it in your Aventail Connect installation package.•The ping utility checks for network connectivity between two hosts and returns information about the quality of the connection.•The traceroute utility checks for network connectivity by displaying information about routers between two hosts. It displays information for each hop.S5 Ping determines whether a host outside of an extranet server is active. After a response from the host returns, the extranet server relays the data back to the client and displays it in the
`
`S5 Ping
`
`Aventail Connect 3.01/2.51 User’s Guide • 19
`
`Petitioner Apple Inc. - Ex. 1010, p. 19
`
` dialog box.
`

`

`SECURE EXTRANET EXPLORER
`
`Extranet Neighborhood
`
`Secure Extranet Explorer (SEE) allows you to view your Extranet Neighborhood, which is accessed through the
`
`User’s Guide
`
`NOTE: Some