`
`
`
`
`
`
`
`
`
`SABIT ADANUR
`Professor
`Auburn University, Department of Polymer and Fiber Engineering, Auburn, AL 36849
`Phone: (334) 444-8599 (cell - preferred), (334) 844-5497 (office), Fax: (334) 844-4068
`e-mail: sabitadanur@gmail.com (preferred), adanusa@auburn.edu, http://www.eng.auburn.edu/~adanusa
`
`
`
`Ph.D. in Fiber and Polymer Science
`North Carolina State University, Raleigh, North Carolina.
`
`M.S. in Textile Engineering and Science
`North Carolina State University, Raleigh, North Carolina.
`
`B.S. in Mechanical Engineering
`Istanbul Technical University, Istanbul, Turkey.
`
`1. EDUCATION
`
`
`
`June 1989
`
`
`
`
`
`Dec. 1985
`
`
`
`
`
`July 1982
`
`
`
`PROFESSIONAL EXPERIENCE
`
`
`
`Aug. ’15 – Present
`
`
`
`Professor
`Auburn University, Mechanical Engineering Department, Auburn, Alabama.
`
`Oct. ’00 – Aug. ‘15
`
`
`Professor
`Auburn University, Polymer and Fiber Engineering Department, Auburn, Alabama.
`
`Oct. '96 – Sept. ‘00
`
`
`Associate Professor
`Auburn University, Textile Engineering Department, Auburn, Alabama.
`
`
`
`
`
`
`
`
`
`Assistant Professor
`Auburn University, Textile Engineering Department, Auburn, Alabama.
`
`Product and Process Development Manager
`Asten Forming Fabrics, Inc., Appleton, Wisconsin.
`
`Process Development Engineer
`Asten Forming Fabrics, Inc., Appleton, Wisconsin.
`
`
`
`
`
` Sep. '92 - Sep. '96
`
`
`
`
`Nov. '89-Aug '92
`
`
`
`
`
`July '89-Oct. '89
`
`
`
`
`
`Aug. '83-Jun. '89
`
`Research/Teaching Assistant
`North Carolina State University, Raleigh, North Carolina.
`
`
`
`
`Litigation Support Experience
`
`1) I gave a deposition in a case involved Asten Forming Fabrics and their competitor regarding a patent infringement
`case regarding a forming fabric design, Opelika, AL, mid 1990s.
`
`
`
`1
`
`BEDGEAR 1006
`IPR of U.S. Pat. No. 8,402,580
`
`
`
`
`
`Dr. S. Adanur – CV, December 2015
`
`
`
`2) I was retained by Sulzer Textile as an expert in a lawsuit with Picanol in a patent infringement case involving air-jet
`weaving machine operations, 2000-2001. The jury trial lasted more than a week in September 2001 in Tyler, Texas.
`
`3) I was retained as an expert by Southern Mills against Polartec in a patent infringement case regarding fire resistant
`fleece knit fabric and garment, Atlanta, GA, 2008 (gave deposition and expert testimony in the court).
`
`4) I was retained as an expert by Adidas against Nike in a patent infringement case regarding knitted fabric sports shoes,
`Atlanta, GA, 2013- 2014 (gave deposition).
`
`5) Currently I am retained by companies as expert witness.
`
`Professional Development Activities
`
` •
`
` Attended the Biggio Seminar “Engaging Students in Active Learning”, 14 February 2013, Biggio Center, Auburn
`University.
`• Attended the tutorial “Canvas Orientation”, Sept. 20, 2011, Auburn University.
`• Attended the workshop “Introduction to Performance Tasks”, by [Cla]ssroom Academy, 15-16 August, 2011,
`Auburn, AL.
`• Completed the Alabama Ethics Law Training, March 31, 2011.
`• Developing Online Courses (July 14, 2010)
`• Teaching with Powerpoint 2007 (July 13, 2010)
`• Attended the Biggio Seminar, “Writing to Learn and Learning to Write”, by Alyson Whyte, 13 Nov. 2008
`• Attended the Biggio Seminar,“Nurturing the Expectancy Effect”, March 11, 2008.
`
`
`
`2. ASSIGNED DUTIES FOR THE PAST FIVE YEARS (average)
`
`
`Quarter Teaching (%)
`Summers
`0
`Academic
`63
`
`Research (%)
`92
`32
`
`Extension/Service (%)
`8
`5
`
`
`3. HONORS AND AWARDS
`
`- Our Poster entitled “Activated carbon fiber filter media for proton exchange membrane fuel cell cathode” by Liu,
`W. and Adanur, S., won the best poster award at the Fiber Society Meeting in Shanghai, China, June 2009.
`- My graduate student Mr. Erdem Selver was chosen as one of the ten Outstanding Master's Students at Auburn
`University for 2008-2009 by the AU Graduate Council.
`- Outstanding Faculty Award, Department of Polymer and Fiber Engineering, 2008-2009
`- Best poster presentation for the NSF Research Experience for Undergraduates (REU) Program in Micron/Nano-
`Structured Materials, Therapeutics and Devices. Title: Addition of Nanoparticles to Electrospun Nanofibers.
`Authors: Roxanne Guarin, Wei Liu and Sabit Adanur. Auburn REU Fellows Research Poster Session, July 31,
`2008. There were 10 undergraduate students from different parts of the US in this program who spent their
`summers in Auburn.
`- Outstanding Faculty Award, Department of Polymer and Fiber Engineering, 2007-2008
`- Outstanding Teacher Award, Department of Textile Engineering, 2002-2003.
`- Outstanding Teacher Award, Department of Textile Engineering, 2001-2002.
`- Auburn Alumni Professor Award (1999 – 2004).
`
`
`
`2
`
`
`
`
`
`Dr. S. Adanur – CV, December 2015
`
`
`
`- Outstanding Teacher Award, Department of Textile Engineering, 2000-2001.
`- AU College of Engineering Birdsong Merit Teaching Award 2000
`- Outstanding Teacher Award, Department of Textile Engineering, 1999-2000.
`- Auburn Alumni Engineering Council Senior Faculty Research Award, 1999.
`- My graduate student Mr. Baohua Xu is awarded the academic excellence award for international students (June
`1998).
`- Nominated two years in a row (1997 and 1998) as a potential participant in the National Academy of Engineering
`(NAE)'s Third and Fourth Annual Symposiums on Frontiers of Engineering, Irvine, CA.
`1995 NSF Faculty Early Career Development (CAREER) Award, National Science Foundation, $ 210,000.00,
`duration: 4 years (Sept. 1, 96-Aug. 31, 2000).
`- Nominated by Dr. William V. Muse two years in a row (1994 and 1995) to represent Auburn University in highly
`prestigious National Science Foundation, Presidential Faculty Fellows Award competition (only two candidates can
`be nominated by an institution).
`1991 George Goldfinger Award. "This award is presented to the graduate of the North Carolina State University,
`College of Textiles, Fiber and Polymer Science Program who was judged to have submitted the most outstanding
`Ph.D. thesis over the past two years".
`
`-
`
`-
`
`
`4. SCHOLARLY CONTRIBUTIONS
`
`4. A. TEACHING
`
`4.A.1 Courses Taught for the Past Five Years
`
`ENGR 1110
`FBEN 2250
`PFEN 2270
`PFEN 3200
`PFEN 3300
`TXTN 3450
`PFEN 4300
`PFEN 4820
`PFEN 5100
`PFEN 6100
`PFEN 6106
`PFEN 6250
`PFEN 7960
`PFEN 7970
`PFEN 7990
`PFEN 7210
`PFEN 7960
`PFEN 7970
`PFEN 7980
`PFEN 7990
`PFEN 8200
`ITAS 8990
`
`4.A.2 Graduate Students Whose Work Has Been Completed
`
`
`
`
`
`
`
`
`Introduction to Engineering
`Fabric Design and Engineering
`Introduction to Engineered Fibrous Materials
`Polymer Processing
`
`Fibrous Product Testing and Instrumentation
`Technical Textiles
`Engineered Fibrous Structures
`Senior Design
`Fabrics for Papermaking
`Fabrics for Papermaking
`Fabrics for Papermaking (outreach)
`Advanced Eng. Fibrous Str.
`
`Adv. Polymer Processing lab
`
`Advanced Polymer Processing
`
`Research and Thesis
`
`
`Fabric Formation and Properties
`Special Problems in Polymers and Fibers
`Special Topics
`
`
`Graduate Project
`
`Research and Thesis
`Adv Textl Struct Desi & Develop
`Research and Dissertation
`
`
`
`
`
`
`
`
`
`Students for Whom The Candidate Served as Major Professor
`
`3
`
`
`
`
`
`
`
`
`
`Dr. S. Adanur – CV, December 2015
`
`
`
`
`Department Graduation Date Current Employer
`Chair
`Degree
`Student
`PFEN
`Dec. 2015
`Highland Composites
`Dr. Adanur
`PhD
`Shen, Y.
`
`PFEN
`Dec. 2013
`Ph.D. student at PFEN
`Dr. Adanur
`MS
`Shen, Y.
`
`PFEN
`May 2012
`Interviewing
`Dr. Adanur
`MS
`Meeks, S. B.
`
`PFEN
`Dec. 2010
`Graduate Student
`Dr. Adanur
`MS
`Zheng, H.
`
`PFEN
`May 2010
`Istanbul Technical Univ.
`Dr. Adanur
`PhD
`Gocek, I.
`
`PFEN
`May 2010
`Pamukkale University
`Dr. Adanur
`PhD
`Keskin, R.
`
`PFEN
`May 2010
`A company in IL
`Dr. Adanur
`PhD
`Liu, W.
`
`PFEN
`May 2010
`PhD Student/England
`Dr. Adanur
`MS
`Selver, E.
`
`PFEN
`May 2009
`AU PhD student
`MPFEN Dr. Adanur
`Liu, W.
`
`PFEN
`May 2007
`A company in Turkey
`MS
`Dr. Adanur
`Isikel, L.
`
`PFEN
`Dec. 2005
`Nexus Software Sol,Inc., MN
`PhD
`Dr. Adanur
`Irsale, Swagat J.
`
`PFEN
`Aug. 2005
`Valeo, Inc., Bursa, Turkey
`PhD
`Dr. Adanur
`Ascioglu, Birgul
`Textile Eng.
`Dec. 2003
`Nexus Software Sol, Inc., PA.
`MS
`Dr. Adanur
`Irsale, Swagat J.
`MTE
`Adanur/Tippur Textile Eng. May 2005
`GKN Aerospace
`
`Hughes, Kevin
`Vakalapudi, Sathendra MS
`Dr. Adanur
`Textile Eng.
`Aug. 2003
`Detroit (software co.)
`Onal, Levent
`PhD
`Dr. Adanur
`Textile Eng. May 2002
`Erciyes University
`Turel, Tacibaht
`MS
`Dr. Adanur
`Textile Eng.
`Aug. 2002
`PhD, Consumer Aff.
`Tascan, Mevlut
`MS
`Dr. Adanur
`Textile Eng. May 01
`PhD, Clemson Univ.
`Orak, Hakan
`MS
`Adanur/Tippur Textile Eng. May 01
`PhD, Clemson Univ.
`Kayathi, K. K.
`MS
`Dr. Adanur
`Textile Eng.
`January 01
`India
`Xu, BaoHua
`MS
`Dr. Adanur
`Textile Eng.
`Aug. 99
`PhD Student, TE
`Arumugam, Yuvaraj
`MS
`Dr. Adanur
`Textile Eng.
`July 98
`Goodyear Tire Co.
`Qi, Jing
`MS
`Dr. Adanur
`Textile Eng. May 98
`Grad Student in EE
`Tewari. Ashutosh
`MS
`Dr. Adanur
`Textile Eng.
`Dec. 97
`California Co.
`Hou, Zhenwei
`MS
`Dr. Adanur
`Textile Eng.
`Dec. 97
`PhD Candidate
`Gongalareddy, Sreekanth MS
`Dr. Adanur
`Textile Eng.
`Dec. 96
`Telecom., Atlanta
`Mallick, Sumita B.
`MS
`Dr. Adanur
`Textile Eng.
`Aug. 96
`PhD (Boston Univ.)
`Zhai, Honglian
`MS
`Dr. Adanur
`Textile Eng.
`Aug. 96
`TCOM, Maryland
`Yuksekkaya, M. Emin MS
`Dr. Adanur
`Textile Eng.
`June 96
`Prof., Usak U., Turkey
`Tsao, Yen P.
`MS
`Dr. Adanur
`Textile Eng.
`Dec. 95
`Taiwan
`Tam, Chi-Wen
`MS
`Dr. Adanur
`Textile Eng.
`March. 95
`Taiwan
`Sartain, Stephen L.
`MS
`Dr. Adanur
`Textile Eng.
`Dec. 94
`Own automotive business
`
`Others:
`Inan, Gunes
`Kilinc, F. Selcen
`Unsal, Evren
`Xu, BaoHua
`Zhenwei Hou
`Mallick, Sumita B.
`Nalamati, R. Kumar
`
`PhD
`PhD
`PhD
`PhD
`PhD
`PhD
`MS
`
`Textile Eng.
`Dr. Adanur
`Textile Eng.
`Dr. Adanur
`Textile Eng.
`Dr. Adanur
`Textile Eng.
`Dr. Adanur
`Textile Eng.
`Dr. Adanur
`Civil Eng.
`Dr. Adanur
`Dr. Adanur Mech. Eng.
`
`Aug. 04-Dec. 04
`Aug. 00 – Dec. 01
`Aug. 00-Feb. 01
`June 99 – Dec. 99
`Jan. 99 – Sept. 99
`Aug. 96 – Aug. 98
`Sept. 95- April 96
`
`4
`
`
`
`
`
`
`
`
`
`Dr. S. Adanur – CV, December 2015
`
`
`
`Students for Whom The Candidate Served as Committee Member
`
`
`
`
`
`
`Student
`Uday B. Sangars
`Furlong, Shane
`
`Snead, Ed
`
`Shirgaonkar, S.
`
`White, Charles J.
`Poyraz, Selcuk
`Smith, James
`Wang, Xialong
`Blackwell, C.
`Liu, Yang
`
`Liu, Zhen
`Quinones ,Vladimir
`Luna, Eric
`Anthony, Rebecca
`Hasan Kocer
`
`Ray, Rebecca
`
`Ma, Erjian
`McCarthy, P. J.
`Xiao, Liming
`Hunt, Rich
`Kirkpatrick, C. T.
`Kotha, S.
`Xi, Xiaomei
`Zhang, Qiang
`Vickers, Daniel
`
`Department Graduation Date Current Employer
`Chair
`Degree
`ME
`
`Dec. 2015
`Interviewing
`Dr. Beale
`MS
`Dr. Broughton PFEN
`
`Dec. 2015
`Interviewing
`MS
`Dr. Thomas
`PFEN
`
`May 2015
`PhD
`MS
`Dr. Beale
`MECH
`Dec. 2014
`Hanwha, Opelika
`MS
`Dr. Byrne
`CHEN
`
`Aug. 2014
`FDA
`PhD
`Dr. Zhang
`PFEN
`
`June 2014
`Assist. Prof., Turkey
`PhD
`Dr. Zhang
`PFEN
`
`May 2014
`Private Industry
`MS
`Dr. Zhang
`PFEN
`
`Spring 2013
`PhD student.
`MS
`MPFEN Dr. Thomas
`PFEN
`
`Dec. 2012
`CSP
`MS
` Dr. Zhang
`PFEN
`
`Fall 2011
`PhD student at AU
`PhD
`Dr. Zhang
`PFEN
`
`Spring 2009
`Un. of Maryland
`PhD
` Dr. Thomas
`PFEN
`
`Spring 2011
`Post-doc at AU
`PhD
` Dr. Tatarchuk Chemical Eng. Summer 2009
`Syngenta Crop P., NC
`MPFEN Dr. Thomas
`PFEN
`
`Spring 2009
`Unknown
`M.S.
`Dr. Broughton PFEN
`
`Fall 2007
`PhD student ITAS
`M.S.
`Dr. Thomas
`PFEN
`
`Fall 2006
`Unknown
`PhD
`Dr. Jang
`Materials Eng. Spring 01
`Unknown
`MCE
`Dr. Elton
`Civil Eng.
`Spring 96
`Denver, CO
`PhD
`Dr. Yang
`Materials Eng. Spring 98
`Postdoc, AU EE
`MS
`Dr. Nelms
`Electrical Eng. June 97
`Unknown
`MS
`Dr. Jang
`Materials Eng. Spring 97
`California Company
`MS
`Dr. Gowayed Textile Eng.
`Spring 97
`India
`PhD
`Dr. Yang
`Materials Eng. Aug. 96
`California Company
`PhD
`Dr. Beale
`Mechanical Eng. Jan. 96
`A Comp. in Maryland
`MS
`Dr. Beale
`Mechanical Eng. March 95
` FMP/Rauma
`
`Students for Whom the Candidate Served as Outside Reader
`
`
`
`
`Student
`Donath, Gregory W.
`Ajitsaria, Jyoti K.
`Butts, Daniel Alan
`ElBashir, Nimir
`Gopalakrishnan, M.
`Noureldin, M.
`Patil, A. R.
`Park, Y.
`Shelley, M. D.
`Abdo, Z. A. M.
`Garrison, W.
`Yim, J. H.
`Hamad, A. A.
`
`Degree Chair
`PhD
`Dr. Duke
`PhD
`Dr. Choe
`PhD
`Dr. Gale
`PhD
`Dr. C. Roberts
`PhD
`Dr. ElHalwagi
`PhD
`Dr. ElHalwagi
`PhD
`Dr. Crocker
`PhD
`Dr. Roberts
`PhD
`Dr. El-Halwagi
`PhD
`Dr. Gale
`PhD
`Dr. El-Halwagi
`PhD
`Dr. Jang
`PhD
`Dr. El-Halwagi
`
`
`Department
`
`Chemical Eng.
`
`Mech. Eng.
`
`Materials Eng.
`
`Chemical Eng.
`
`Chemical Eng.
`
` Chemical Eng.
`Mechanical Eng.
`Chemical Eng.
`
`Chemical Eng.
`
`Materials Eng.
`Chemical Eng.
`Materials Eng.
`Chemical Eng.
`
`Defense Date
`Nov. 10, 2008
`Aug. 29, 2008
`May 9, 2005
`Nov 15. 2004
`May 21, 2002
`Oct.12, 00
`Sept. 11, 00
`July 20, 00
`Apr. 20, 00
`Dec. 3, 99
`May 8, 97
`Apr. 25, 97
`Apr. 21, 97
`
`
`
`5
`
`
`
`
`
`Dr. S. Adanur – CV, December 2015
`
`
`
`Apr. 8, 97
`Feb. 26, 96
`Oct. 10, 95
`April 25, 95
`
`Mallick, R. B.
`Zhao, Li-Ren
`Haque, Anwarul
`Yim, Jong H.
`
`4.A.3 Graduate Students on Whose Committee the Candidate is Presently Serving
`
`PhD
`PhD
`PhD
`PhD
`
`Dr. Brown
`Dr. Jang
`Dr. Raju
`Dr. Jang
`
`Civil Eng.
`Materials Eng.
`Mechanical Eng.
`Materials Eng.
`
`Students for Whom the Candidate is Serving as Committee Member
`
`
`
`
`Student
`Cermik, Ozdes
`
`Degree
`Ph.D.
`
`Chair
`Marghitu
`
`Department
`ME
`
`Date Started
`Fall 2010
`
`Visiting Scholars/Students Supported
`
`
`Origin
`
`
`
`Duration
`
`
`
`Name
`
`Ms. Roxanne Guarin
`Ms. Stacy Yee
`Ms. Christina Yacoob
`Dr. Levent Gumusel
`Dr. Hasan Bas
`Ms. Abibe Maimaiti
`Dr. Gulay Ozcan
`Dr. Tianyi Liao
`Dr. Sule Altun
`
`4.A.4 Courses and Curricula Developed
`
`New Undergraduate Courses Developed:
`
`Dr. Adanur has developed the following courses which did not exist before.
`
`
`Undergraduate student from Univ. of Mass-Amherst May 21, 2008- July 31, 2008
`Undergraduate student from Univ. of Michigan
`May 21, 2007- July 27, 2007
` Undergraduate student from SUNY Buffalo
`May 29, 2006-Aug. 4, 2006
`
`Turkey
`
`Jan. – Feb. 2005, Jan. 2006
`
`Turkey
`
`Jan. – Feb. 2005, Jan. 2006
`
`China
`
`Sept. 2001-Sept. 2002
`
`Turkey
`
`January 01 – February 01
`
`China
`
`Aug. 96 - March 99.
`
`Turkey
`
`July 99-Sept. 99
`
`1. PFEN 3200 Polymer Processing
`2. ENGR 1110 Introduction to Polymer and Fiber Engineering
`3. PFEN 3300 Fibrous Product Testing and Instrumentation
`4. PFEN 4300 Engineered Fibrous Structures
`5. PFEN 5100/6100 Fabrics for Papermaking
`6. TXTN 3450 Technical Textiles
`7. TE 225 Fabric Design and Manufacturing
`8. TE 460 Mechanics of Textile Manufacturing Processes and Systems
`
`
`New Graduate Courses Developed:
`
`
`1. PFEN 7210 Fabric Formation and Properties
`2. PFEN 6250 Advanced Engineering Fibrous Structures
`3. PFEN 8200 Advanced Textile Structure Design and Development
`
`
`
`6
`
`
`
`
`
`Dr. S. Adanur – CV, December 2015
`
`
`
`
`4.A.5 Grants Received Related to Teaching (Total $ 241,864.00; see also 4.B.8)
`
`1. Adanur, S., Graduate Outreach Program (GOP) Grant, $135.00, Spring 2009.
`
`2. Two injection molding machines were donated to polymer processing lab by ThermoFisher Scientific of
`Auburn, May 2007, $9,000.00.
`
`3. Travel fund for the ITMA 2003, Birmingham, England.
`Funding Agent: Highland Takata Industries
`Amount: $ 3,428.92
`Duration: Oct. 21-30, 2003.
`
`4. Developing a Course Based on Equipment Design for Introduction to Engineering
`Funding Agent: AU College of Engineering
`Amount: $ 24,050
`PI: P. Jones (leader), C. A. Flood, S. Adanur
`Duration: June 1, 1999-May 31, 2000
`
`5. Title: Travel fund for IFAI Expo 1999, San Diego, CA.
`Funding Agent: Highland Takata Industries
`Amount: $ 4,000.00
`PI: W. Walsh, S. Adanur, R. Broughton, Y. ElMogahzy
`Duration: Oct. 28-30, 1999.
`
`6. Title: Travel fund for Messe Frankfurt Industrial Textiles Fair, Frankfurt, Germany
`Funding Agent: Highland Takata Industries
`Amount: $ 4,000.00
`PI: S. Adanur (50%), W. Walsh (50%)
`Duration: May 11-18, 1998
`
`7. Title: Textile Structural Composites Laboratory
`Funding Agent: National Science Foundation, Instrumentation and Laboratory Improvement (ILI)
`Amount: $ 87,185.00
`PI: S. Adanur (95 %), Co-PIs: W. Walsh, R. Walker, B. Jang
`Duration: Sept. 1, 94- Aug. 31, 96
`This NSF grant is specifically for undergraduate curriculum development purposes.
`
`8. Title: Wellington Sears Handbook of Industrial Textiles
`Funding Agent: Wellington Sears Company, Valley, Alabama.
`Amount: $ 60.000.00
`PI: Sabit Adanur
`Duration: Oct. 1, 93 - March 15, 95.
`
`
`
`
`7
`
`
`
`
`
`Dr. S. Adanur – CV, December 2015
`
`
`
`9. Title : Discretionary Teaching Grant-in-Aid
`Funding Agent: Auburn University
`Amount: $ 200.00
`PI: Sabit Adanur
`Duration: Nov. 1, 92 - Apr. 30, 93.
`
`10. Two shuttle looms and a warper were donated to weaving lab by West Point Stevens Company, AL,
`1992/1993, $ 50,000.00.
`
`
`4.A.6 Publications Pertaining to Teaching
`
`Textbooks/Book Chapters
`
`1. Chapter 8 – “Structure and Mechanics of Coated Fabrics”, book chapter in “Structure and Mechanics of Fibre
`Assemblies”, edited by Peter Schwartz - Woodhead Publishing Limited and CRC Press LLC, 2008.
`2. “Fabrics for Papermaking”, first draft of the chapter prepared and submitted for the book, “Technology and Woven
`Fabrics” edited by Dr. Mansour H. Mohamed, Woodhead Publishing, Ltd.
`3. Adanur, S., Wellington Sears Handbook of Industrial Textiles, Technomic Publishing Co., Inc., Lancaster, PA,
`1995. Library of Congress Catalog Card No. 95-61229, ISBN No. 1-56676-340-1, 850 pages (519 figures and 140
`tables).
`4. Adanur, S., Paper Machine Clothing, Technomic Publishing Co., Inc., Lancaster, PA, 1997. Library of Congress
`Catalog Card No. 97-60981, ISBN No. 1-56676-544-7, 405 pages (338 figures, 55 tables).
`5. Adanur, S., Handbook of Weaving, Technomic Publishing Co., Inc., 2001. Library of Congress Catalog Card No.
`00-107625, ISBN No. 1-58716-013-7. 446 pages (539 Figures, 52 Tables).
`
`
`Lecture Notes (Bound)
`
`
`1. TE 425 Technical Textiles, Lecture Notes, Auburn University, 191 pages.
`2. TE 460 Mechanics of Textile Manufacturing Processes and Systems, Lecture Notes, Auburn University, 154
`pages.
`
`
`4.A.7 Other Contributions to Teaching
`
`
`• Accreditation Board for Engineering and Technology (ABET) Accreditation of Textile Engineering program in
`1998 and Fiber Engineering program in 2004 (ABET Coordinator)
`• Semester Transition (was responsible for the quarter to semester transition for the curriculums in the
`Department of Textile Engineering).
`• Expansion of Master's Program (actively participated in expanding the Masters program in the Department.
`There were not adequate graduate level courses that covered certain aspects of the Master of Science program
`in Textile Engineering. Developed four new graduate level courses for this purpose).
`• Establishment of Ph.D. Program (was a member of the Textile Engineering Department Committee to establish
`a joint Ph.D. program with the Consumer Affairs Department).
`
`
`Establishment of High Performance Materials Laboratory
`
`
`
`
`8
`
`
`
`
`
`Dr. S. Adanur – CV, December 2015
`
`
`
`Dr. Adanur has established an industrial textiles/composites laboratory in the Department. The lab is equipped with
`
`state of the art equipment and is being used for teaching. Besides teaching, the laboratory provides an excellent
`opportunity for undergraduate and graduate students in their projects and independent studies. The lab will strengthen
`the University's interaction with industry. A new Instron was purchased and installed in the lab. Dr. Adanur received
`funding from National Science Foundation for a computerized braiding machine which has been installed in the lab. He
`has purchased and installed a new compression molding machine and Dynatup impact testing machines with the NSF
`EPSCoR funding. The value of these machines is around $ 600,000.00.
`
`
`
`
`4.B RESEARCH / CREATIVE WORK
`
`4.B.1 Books/Book Chapters (See 4.A.6)
`
`1. Chapter 8 – “Structure and Mechanics of Coated Fabrics”, book chapter in “Structure and Mechanics of Fibre
`Assemblies”, edited by Peter Schwartz - Woodhead Publishing Limited and CRC Press LLC, 2008.
`2. “Fabrics for Papermaking”, first draft of the chapter prepared and submitted for the book, “Technology and Woven
`Fabrics” edited by Dr. Mansour H. Mohamed, Woodhead Publishing, Ltd.
`3. Adanur, S., Wellington Sears Handbook of Industrial Textiles, Technomic Publishing Co., Inc., Lancaster, PA,
`1995. Library of Congress Catalog Card No. 95-61229, ISBN No. 1-56676-340-1, 850 pages (519 figures and 140
`tables).
`4. Adanur, S., Paper Machine Clothing, Technomic Publishing Co., Inc., Lancaster, PA, 1997. Library of Congress
`Catalog Card No. 97-60981, ISBN No. 1-56676-544-7, 405 pages (338 figures, 55 tables).
`5. Adanur, S., Handbook of Weaving, Technomic Publishing Co., Inc., 2001. Library of Congress Catalog Card No.
`00-107625, ISBN No. 1-58716-013-7. 446 pages (539 Figures, 52 Tables).
`
`
`4.B.2 Article-length Publications
`
`Refereed Journal Articles (*: student)
`
`1. Liu, W*., and Adanur, S, “Desulfurization Properties of Activated Carbon Fibers”, Journal of Engineered Fibers
`and Fabrics, Vol. 9, Issue 2, June 2014, pp. 70-75.
`2. Shen, Y*., Meir, A. J., Cao, Y., and Adanur, S., “Finite Element Analysis of Monofilament Woven Fabrics under
`Uniaxial Tension”, Journal of the Textile Institute, published online: 10 April 2014,
`http://www.tandfonline.com/doi/full/10.1080/00405000.2014.906098.
`3. Adanur, S., and Liu, W*., “Desulfurization Properties of Modified Activated Carbon Fibers and Activated Carbon
`Fiber Paper”, Journal of Industrial Textiles, 5 September 2013, DOI:10.1177/1528083713502997.
`4. Adanur, S., and Zheng, H*., “Synthesis and Characterization of Sulfonated Polyimide Based Membranes for Proton
`Exchange Membrane Fuel Cells”, Journal of Fuel Cell Science and Technology, Aug. 2013, Vol. 10, 041001, pp. 1-
`5.
`5. Liu, W*., Yee, S*., and Adanur, S., “Properties of Electrospun PVA/nanoclay Composites”, Journal of the Textile
`Institute, 2013, http://www.tandfonline.com/doi/abs/10.1080/00405000.2013.819156
`6. Adanur, S., and Vakalapudi, J. S*., “Woven Fabric Design and Analysis in 3D Virtual Reality, Part 1: Computer
`Aided Design and Modeling of Interlaced Structures”, Journal of the Textile Institute, DOI:
`10.1080/00405000.2012.753698, published January 10, 2013.
`7. Gocek, I*., and Adanur, S., “Effect of Processing Parameters on Polypropylene Film Properties”, International
`Journal of Modern Engineering Research (IJMER), Vol. 2, Issue 5, Sep.-Oct. 2012, pp. 3056-3060.
`
`
`
`9
`
`
`
`
`
`Dr. S. Adanur – CV, December 2015
`
`
`
`8. Gocek, I*., and Adanur, S., “Effect of Nanoclay Amount and Compatibilizer Presence on Thermal, Morphological
`and Mechanical Behaviour of Nanoclay Reinforced Composite Polypropylene Cast Film”, Materials Testing, 54
`(2012) 5, pp. 318-329 (German/English).
`9. Adanur, S., and Vakalapudi, J. S., “Woven Fabric Design and Analysis in 3D Virtual Reality, Part 2: Predicting
`Fabric Properties with the Model”, Journal of the Textile Institute (DOI:10.1080/00405000.2012.745236, published
`3 December 2012).
`10. Adanur, S., and Selver, E., “Nanoclay/Polypropylene Composite Monofilament Processing and Properties using
`Twin and Single Screw Extruders”, International Journal of Polymeric Materials (published 5/17/2012:
`http://www.tandfonline.com/doi/abs/10.1080/00914037.2011.641696).
`11. Keskin, R*., and Adanur, S., "Improving Toughness of Polypropylene with Thermoplastic Elastomers in Injection
`Molding", Polymer-Plastics Technology and Engineering, 50:20-28, 2011 (January 2011).
`12. Selver, E*., and Adanur, S., “Processing and Property Relationship of Nanoclay Reinforced Polypropylene
`Monofilaments, Journal of Industrial Textiles”, Vol. 40, No. 2, Oct. 2010, pp. 123-137.
`13. Isikel, L*., Gocek, I*., and Adanur, S., “Design and Characterization of Nonwoven Fabrics for Gas Diffusion Layer
`in Polymer Electrolyte Membrane Fuel Cell”, The Journal of the Textile Institute, Vol. 101, No. 11, Nov. 2010, pp.
`1006-1014.
`14. Yacoob, C*., Liu, W.*, and Adanur, S., “Properties and Flammability of Electrospun PVA and PVA/Laponite®
`Membranes”, Journal of the Industrial Textiles, Vol. 40, No. 1., July 2010, pp. 33-48.
`15. Liu, W*., and Adanur, S., “Properties of Electrospun Polyacrylonitrile Membranes and Chemically-Activated
`Carbon Nanofibers”, Textile Research Journal, Vol. 80(2), pp. 124-134, Jan. 2010.
`16. Ascioglu, B*., Adanur, S., Gumusel, L., and Bas, H., “Transverse Direction Thermal Conductivity Modeling of
`Nano-micro Fiber Reinforced Composites”, Textile Research Journal, Vol. 79 (12), 2009, pp. 1059-1066.
`17. Yuksekkaya, M. E*., and Adanur, S., “Analysis of Polymeric Braided Tubular Structures Intended for Medical
`Applications”, Textile Research Journal, 2009; Vol. 79, No. 2, pp. 99-109.
`
`18. Yuksekkaya, M.E.*, Thomas, H., and Adanur, S., “Influence of the Fabric Properties on Fabric Stiffness for the
`Industrial Textiles”, Tekstil and Konfeksiyon (English), April 2008, pp. 263-267.
`19. Adanur, S., and Qi, J*., "Property Analysis of Denim Fabrics Made on Air-Jet Weaving Machine, Part 2: Effects
`of Tension on Fabric Properties", Textile Research Journal, Vol. 78(1), Jan. 2008, pp. 10-20.
`20. Adanur, S., and Qi, J*., "Property Analysis of Denim Fabrics Made on Air-Jet Weaving Machine, Part 1:
`Experimental System and Tension Measurements", Textile Research Journal, Vol. 78(1), Jan. 2008, pp. 3-9.
`21. Adanur, S., and Ascioglu, B.*, “Nanocomposite Fiber Based Web and Membrane Formation and Characterization”,
`Journal of Industrial Textiles, Vol. 36, No. 4, April 2007, pp. 311-327.
`22. Elton, D. J., Hayes, D. W.*, and Adanur, S., “Bubblepoint Testing of Geotextiles: Apparatus and Operation”,
`American Society for Testing Materials (ASTM) Geotechnical Testing Journal, Vol. 30, No. 1, Jan. 2007.
`23. Onal, L.*, and Adanur, S., “Modeling of Elastic, Thermal and Strength/Failure Analysis of 2D Woven Composites
`– A Review”, Applied Mechanics Reviews (AMR), Vol. 60, Issue 1, pp. 37-49, Jan. 2007.
`24. Irsale, S.*, and Adanur, S., “Design and Characterization of Polymeric Stents, Journal of Industrial Textiles, Vol.
`35, No. 3, January 2006, pp. 189-199.
`25. Onal, L.*, and Adanur, S., “Optimization of Compression Molding Process in Laminated Woven Composites”,
`Journal of Reinforced Plastics and Composites”, Vol. 24, No. 7, 2005, pp. 775-780.
`26. Adanur, S., and Onal, L.*, “Analysis of a Novel 3D Hybrid Woven/Knitted Fabric Structure, Part II: Mechanical
`Model to Predict Modulus and Extension”, Textile Research Journal, 74(10), 865-871, October 2004.
`
`
`
`10
`
`
`
`
`
`Dr. S. Adanur – CV, December 2015
`
`
`
`27. Onal, L.*, and Adanur, S.,, “Analysis of a Novel 3D Hybrid Woven/Knitted Fabric Structure, Part I: Geometric
`Model and Verification”, Textile Research Journal, 74(9), 827-832, September 2004.
`28. Adanur, S., and Turel, T.*, “Effects of Air and Yarn Characteristics in Air-Jet Filling Insertion, Part II:Yarn
`Velocity Measurements with a Profiled Reed”, Textile Research Journal, 74(8), 657-661, August 2004.
`29. Adanur, S., “Dynamic Analysis of Air-Jet Filling Insertion: Effect of Timing on Air and Yarn Velocity”,
`Developments in Theoretical and Applied Mechanics, Eds. H. Mahfuz and M. V. Hosur, Vol. XXII, 2004, pp. 202-
`207.
`30. Turel, T.*, Bakhtiyarov, S., and Adanur, S., “Effects of Air and Yarn Characteristics in Air-Jet Filling Insertion,
`Part I: Air Velocity and Air Pressure Measurements”, Textile Research Journal, 74(7), 592-597, July 2004.
`31. Adanur, S., Mcclain, A., and Xu, B.*, “A Novel Approach to Fast Net-Shape Manufacturing of Braided Epoxy
`Composites”, Journal of Elastomers and Plastics, Vol. 35, No. 3, July 2003.
`32. Adanur, S., and Arumugham, Y.*, “Characteristics of Ultraviolet Cured Glass/Epoxy Composites, Part 2: Results
`and Discussion”, Journal of Industrial Textiles, Vol. 32, No. 2, October 2002, pp. 107-118.
`33. Adanur, S., and Arumugham, Y.*, “Characteristics of Ultraviolet Cured Glass/Epoxy Textile Composites, Part 1:
`Experimental Procedures and Testing”, Journal of Industrial Textiles, Vol. 32, No. 2, October 2002, pp. 93-106.
`34. Onal, L.*, and Adanur, S., “Effect of Stacking Sequence on the Mechanical Properties of Glass/Carbon Hybrid
`Composites Before and After Impact”, Journal of Industrial Textiles, Vol. 31, No. 4, April 2002, pp. 255-271.
`35. Adanur, S., and Onal, L.*, “Factors Affecting the Mechanical Properties of Laminated Glass/Graphite-Epoxy
`Hybrid Composites”, Journal of Industrial Textiles, Vol. 30, No. 3, January 2002.
`36. Elton, D. J., Mohamed, T.*, and Adanur, S., “BubblePoint and AOS Testing of Geotextiles”, Proceedings of the
`Geosynthetics Conference, 2001, Portland, Oregon, Feb. 12-14, 2001.
`37. Yang*, B. (30%), Kozey, V. (30%), Adanur, S. (20%), and Kumar, S. (20%), "Bending, Compression and Shear
`Behavior of Woven Glass Fiber-Epoxy Composites", Composites: Part B: Engineering, 31 (2000), pp. 715-721.
`38. Liao, T. (50%), and Adanur, S. (50%), “3D Structural Simulation of Tubular Braided Fabrics for Net-Shape
`Composites”, Textile Research Journal, 70(4), pp. 297-303, April 2000.
`39. Vickers, A. D. (30%), Beale, D. G. (40%), Wang, Y. T. (15%), and Adanur, S. (15%), "Analysis of Yarn-to-
`Surface Friction Via Data Acquisition and Digital Imaging Techniques", Textile Research Journal, 70(1), 36-43,
`January 2000.
`40. Adanur, S. (50%), and Liao, T. (50%), "Fiber Arrangement Characteristics and Their Effects on Nonwoven Tensile
`Behavior", Textile Research Journal, 69(11), 816-824, Nov. 1999.
`41. Bakhtiyarov, S. (50%), and Adanur, S. (50%), “Airflow over Wavy Yarn in Air-jet Filling Insertion”, Mathematical
`& Computational Applications, Vol. 4, No. 1, pp. 1-7, 1999.
`42. Adanur, S. (50%), and Bakhtiyarov, S. (50%), “Numerical Study of Collision Efficiency of Dust Particles”,
`Mathematical & Computational Applications, Vol. 4, No. 1, pp. 297-303, 1999.
`43. Liao, T. (50%), and Adanur, S. (50%), "Computerized Failure Analysis of Nonwoven Fabrics Based on Fiber
`Failure Criterion", Textile Research Journal, 69(7), 489-496, July 1999.
`44. Zhang, Q. (30%), Beale, D. (50%) , Broughton, R. M. (10%), and Adanur, S. (10%), "Analysis of Circular Braiding
`Process, Part 2: Mechanics Analysis of the Circular Braiding Process and Experiment", ASME Journal of
`Manufacturing Science and Engineering, August 1999, Vol. 121, pp. 351-359.
`45. Adanur, S. (50%), and Liao, T. (50%), "3D Modeling of Textile Composite Preforms", Composites, Part B:
`Engineering, 29B (1998), pp. 787-793.
`
`
`
`11
`
`
`
`
`
`Dr. S. Adanur – CV, December 2015
`
`
`
`46. Liao, T. (50%), and Adanur, S., (50%)"A Novel Approach to Three Dimensional Modeling of Interlaced Fabric
`Structures", Textile Research Journal, 68(11), November 1998, pp. 841-847.
`47. Adanur, S. (60%), Hou, Z. (20%), and Broughton, R. M. (20%), "Recovery and Reuse of Waste PVC Coated
`Fabrics, Part 2: Analysis of the Components Separated from PVC Coated PET Fabrics", Journal of Coated Fabrics,
`Vol. 28, October 1998.
`48. Adanur, S. (60%), Hou, Z. (20%), and Broughton, R. M. (20%), "Recovery and Reuse of Waste PVC Coated
`Fabrics, Part 1: Experimental Procedures and Separation of Fabric Components", Journal of Coated Fabrics, Vol.
`28, July 1998, pp. 37-55.
`49. Adanur, S. (50%), and Liao, T. (50%), "Computer Simulation of Mechanical Properties of Nonwoven Geotextiles
`in Soil-Fabric Interaction", Textile Research Journal, 68(3), March 1998, pp. 155-162.
`50. Adanur, S. (80%), and Tewari, A.* (20%), "An Overview of Military Textiles", Indian Journal of Fibre & Textile
`Research (IJFTR), 22(4), December 1997, pp. 348-352.
`51. Wang, S*. (50%), Adanur, S. (30%). and Jang, B. Z. (20%), " Mechanical and Thermo-Mechanical Failure
`Mechanism Analysis of Fiber/Filler Reinforced Phenolic Matrix Composites", Composites Part B, 28B, (1997), pp.
`215-231.
`52. Liao, T. (50%), Adanur, S. (40%), and Drean, J. (10%),"Predicting the Mechanical Properties of Nonwoven
`Geotextiles with the Finite Element Method", Textile Research Journal, Vol. 67, No. 10, October 1997, pp. 753-
`760.
`53. Zhang*, Q.(25%), Beale, D. (30%), Ada