Trials@uspto.gov
`571-272-7822
`
`
`
`
`Paper 79
`Entered: June 28, 2018
`
`
`
`
`
`
`
`UNITED STATES PATENT AND TRADEMARK OFFICE
`____________
`
`BEFORE THE PATENT TRIAL AND APPEAL BOARD
`____________
`
`SKECHERS U.S.A., INC.,
`Petitioner,
`
`v.
`
`NIKE, INC.,
`Patent Owner.
`____________
`
`Case IPR2017-00620
`Patent D723,783 S
`____________
`
`
`
`Before KEN B. BARRETT, GRACE KARAFFA OBERMANN, and
`SCOTT A. DANIELS, Administrative Patent Judges.
`
`OBERMANN, Administrative Patent Judge.
`
`
`
`
`FINAL WRITTEN DECISION
`35 U.S.C. § 318(a); 37 C.F.R. § 42.73
`
`
`
`571-272-7822
`
`
`
`
`Paper 79
`Entered: June 28, 2018
`
`
`
`
`
`
`
`UNITED STATES PATENT AND TRADEMARK OFFICE
`____________
`
`BEFORE THE PATENT TRIAL AND APPEAL BOARD
`____________
`
`SKECHERS U.S.A., INC.,
`Petitioner,
`
`v.
`
`NIKE, INC.,
`Patent Owner.
`____________
`
`Case IPR2017-00620
`Patent D723,783 S
`____________
`
`
`
`Before KEN B. BARRETT, GRACE KARAFFA OBERMANN, and
`SCOTT A. DANIELS, Administrative Patent Judges.
`
`OBERMANN, Administrative Patent Judge.
`
`
`
`
`FINAL WRITTEN DECISION
`35 U.S.C. § 318(a); 37 C.F.R. § 42.73
`
`
`
`
`IPR2017-00620
`Patent D723,783 S
`
`
`I. INTRODUCTION
`Pursuant to 35 U.S.C. § 318, we determine in this inter partes review
`that Petitioner fails to carry its burden of showing by a preponderance of the
`evidence that the challenged claim of U.S. Patent No. D723,783 S
`(Ex. 1001, “the ’783 patent”) is unpatentable.
`
`A. Procedural History and Asserted Challenges
`On January 6, 2017, Petitioner filed a Petition (Paper 1, “Pet.”)
`requesting an inter partes review of the claim of the ’783 patent. The
`patented design relates to ornamental features located on the side and bottom
`surfaces of a shoe sole. Ex. 1001, Figs. 1–3. On April 12, 2017, Patent
`Owner filed a Preliminary Response. Paper 12 (“Resp.”).
`The Petition asserts ten (10) grounds of unpatentability against the
`claim. Pet. 5–6. On July 6, 2017, pursuant to 35 U.S.C. § 314, we instituted
`review of the claim (Paper 13, “Dec.”) based on obviousness over:
`
`1.
`RCD 00071 in view of RCD 00122;
`
`2.
`RCD 0007 in view of RCD 0012 and CN13883; and
`
`3.
`RCC 0007 in view of RCD 0012 and RCD 00054.
`Paper 13, 37.
`
`
`1 Certified Registration and Extract from the Register for Registered
`Community Design No. 000827613-0007 (Ex. 1003, “RCD0007”).
`2 Certified Registration and Extract from the Register for Registered
`Community Design No. 000725247-0012 (Ex. 1005, “RCD0012”).
`3 China Design Registration No. CN 301711388 S (Ex. 1009, “CN1388”).
`4 Certified Registration and Extract from the Register for Registered
`Community Design No. 001874165-0005 (Ex. 1004, “RCD0005”).
`
`2
`
`
`
`IPR2017-00620
`Patent D723,783 S
`
`
`On October 26, 2017, Patent Owner filed a Response. Paper 41 (filed
`under seal); Paper 57 (“Resp.”) (public version filed February 15, 2018). On
`February 1, 2018, Petitioner filed a Reply. Paper 51 (“Reply”). We held a
`consolidated final oral hearing5 on April 12, 2018. Paper 77 (“Tr.”).
`On May 3, 2018, we entered an Order that added to the review each
`additional ground of unpatentability asserted in the Petition. Paper 76, 1
`(citing SAS Inst., Inc. v. Iancu, 138 S.Ct. 1348, 1359–1360 (U.S. Apr. 24,
`2018)). Accordingly, we resolve in this decision seven (7) additional
`grounds of obviousness (identified as grounds (4) through (10) below):
`
`4.
`RCD00186 in view of RCD0012;
`
`5.
`RCD0018 in view of RCD0012 and the ’853 patent7;
`
`6.
`RCD0018 in view of RCD0012 and the ’725 patent8;
`
`7.
`RCD0018 in view of RCD0012 and CN1388;
`
`8.
`RCC0018 in view of RCD0012 and RCD0005;
`
`
`
`
`5 The hearing was consolidated with IPR2017-00621 (“IPR621”), which
`involves the same parties and a related design patent. Concurrently
`herewith, we issue a Final Written Decision in IPR621. The parties aver
`also that the ’783 patent is at issue in Nike, Inc. v. Skechers U.S.A., Inc.,
`Case No. 3:16-cv-00007-PK (D. Or.). Pet. 3; Paper 3, 2. Further, in
`IPR2016-00875 (“IPR875”), the Board denied institution of the inter partes
`review request by Petitioner. See Skechers U.S.A., Inc. v. Nike, Inc., Case
`IPR2016-00875, slip. op. 34–35 (PTAB Sept. 29, 2016) (Paper 11).
`6 Certified Registration and Extract from the Register for Registered
`Community Design No. 000120449-0018 (Ex. 1002, "RCD0018").
`7 U.S. Patent No. D447,853 S (Ex. 1007, ‘the ’853 patent’).
`8 U.S. Patent No. D520,725 S (Ex. 1008, ‘the ’725 patent’).
`
`3
`
`
`
`IPR2017-00620
`Patent D723,783 S
`
`RCD0007 in view of RCD0012 and the ’853 patent;
`9.
`
`10. RCD0007 in view of RCD0012 and the ’725 patent.
`
`Paper 76, 1.9
`
`On May 10, 2018, the parties jointly advised the Board that the
`addition of the above seven (7) grounds to the proceeding necessitated no
`changes to the schedule or additional briefing. Paper 78, 1. Accordingly,
`we assess the challenges asserted in the Petition based on the record
`developed during trial.
`
`B. Declaration Evidence
`Petitioner relies on declaration testimony provided by Mr. Robert
`John Anders (Ex. 1013; Ex. 1029). Patent Owner relies on declaration
`testimony provided by Mr. Allan Ball (Ex. 2039). Based on their curricula
`vitae and statements of qualifications, we find that Mr. Anders and Mr. Ball
`both are qualified to opine about the perspective of an ordinarily skilled
`designer. See Ex. 1013 §§ 5–23 (Mr. Anders’ statement of qualifications);
`Ex. 1014 (Mr. Anders’ curriculum vitae); Ex. 2039 §§ 12–20 (Mr. Ball’s
`statement of qualifications); Ex. 2040 (Mr. Ball’s curriculum vitae).
`
`The Designer of Ordinary Skill
`C.
`As we did in our institution decision, we find that a designer of
`ordinary skill in the art would have had either (1) a degree in Industrial
`Design combined with some work experience as a designer of footwear
`designs; or (2) two years of direct experience creating footwear designs.
`
`9 The Petition asserts U.S. Patent No. 6,115,945 (Ex. 1006, “the ’945
`patent”) as a background reference. See, e.g., Pet. 5, 33.
`
`4
`
`
`
`IPR2017-00620
`Patent D723,783 S
`
`Dec. 7. That definition is consistent with Petitioner’s proposed definition.
`Pet. 35 (Petitioner’s definition); Reply 2 (Petitioner, reasserting that
`definition). Patent Owner, for its part, raises no persuasive information
`tending to establish a different definition. Resp. 2 (Patent Owner, essentially
`acquiescing to Petitioner’s definition). That definition also is consistent with
`the disclosures reflected in the asserted prior art references. See Okajima v.
`Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (prior art itself can reflect
`the appropriate level of ordinary skill in the art).
`
`D. Claim Construction
`The claim of the ’783 patent does not require express construction for
`the purposes of this decision. On that point, we observe that Figures 1–3 of
`the ’783 patent (Ex. 1001) reflect the scope of the patented design. To the
`extent any explanation of that scope is necessary to our decision, we provide
`it below in our analysis of the asserted challenge. Nidec Motor Corp. v.
`Zhongshan Broad Ocean Motor Co. Ltd., 868 F.3d 1013, 1017 (Fed. Cir.
`2017) (“we need only construe terms ‘that are in controversy, and only to the
`extent necessary to resolve the controversy’” (quoting Vivid Techs., Inc. v.
`Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)).
`
`
`
`II. DISCUSSION
`“In determining the patentability of a design, it is the overall
`appearance, the visual effect as a whole of the design, which must be taken
`into consideration.” See In re Rosen, 673 F.2d 388, 390 (CCPA 1982). The
`proper standard is whether the design would have been obvious to a designer
`of ordinary skill who designs articles of the type involved, which, in this
`
`5
`
`
`
`IPR2017-00620
`Patent D723,783 S
`
`case, are shoe soles. See In re Nalbandian, 661 F.2d 1214, 1217 (CCPA
`1981); Ex. 1001, Title, Fig. 1 (illustrating ornamental features on the bottom
`surface of a shoe sole); Figs. 2–3 (illustrating ornamental features on the
`lateral side surface of a shoe sole). For reasons that follow, we determine
`that Petitioner fails to carry its burden of identifying a Rosen reference. See
`Rosen, 673 F.2d at 391. As a consequence, Petitioner fails also to establish
`that the challenged claim is unpatentable.
`As a starting point, to make out a successful obviousness challenge,
`Petitioner must identify “a reference, a something in existence, the design
`characteristics of which are basically the same as the claimed design in order
`to support a holding of obviousness. Such a reference is necessary whether
`the holding is based on the basic reference alone or on the basic reference in
`view of modifications suggested by secondary references.” Rosen, 673 F.2d
`at 391. Accordingly, “the first step in an obviousness analysis for a design
`patent requires a search of the prior art for a primary reference,” which
`requires the tribunal “to: (1) discern the correct visual impression created by
`the patented design as a whole; and (2) determine whether there is a single
`reference that creates ‘basically the same’ visual impression.” Durling v.
`Spectrum Furniture Co., 101 F.3d 100, 103 (Fed. Cir. 1996).
`We address the two prongs of the Durling test in turn below.
`
`A. The Visual Impression of the Patented Design as a Whole
`The subject matter of the patented design is reflected in Figures 1–3 of
`
`the ’783 patent. Taken together, Figures 1–3 define the visual impression of
`the patented design as a whole.
`
`
`
`
`
`
`
`6
`
`
`
`IPR2017-00620
`Patent D723,783 S
`
`
`The Bottom Surface of the Patented Design (Fig. 1)
`The patented design includes ornamental features located on the
`bottom surface of the shoe sole, as illustrated in Figure 1, which is
`reproduced below.
`
`
`
`Ex. 1001, Fig. 1. Figure 1 is a view of the bottom surface of a shoe sole
`with ornamental features illustrated as solid lines in the heel region and
`unclaimed features illustrated by broken lines. See Ex. 1001, 1, Description
`(“The broken lines showing the remainder of the shoe are for environmental
`purposes only and form no part of the claimed design.”).
`Figure 1 of the ’783 patent includes an ornamental feature depicted as
`a solid line, located near the center of the heel region, surrounded by
`concentric half ovals (also illustrated using solid lines). Ex. 1001, Fig. 1.
`We, similar to the parties in their briefs, refer to that feature in this decision
`
`7
`
`
`
`IPR2017-00620
`Patent D723,783 S
`
`as “the channel element.”10 E.g., Resp. 14–15, Reply 7–8; Tr. 18:18–25
`(Petitioner’s counsel, observing that “everyone agrees it’s a channel”).
`
`
`The Side Surface of the Patented Design (Figs. 2–3)
`The patented design also includes ornamental features located on the
`lateral (outward facing during normal wear) side surface of the shoe sole.
`Those features are illustrated in Figure 2, reproduced below.
`
`Id. at Fig. 2. Figure 2 is a front perspective view of the lateral side surface
`of a shoe sole, with claimed features indicated in solid lines on the heel area
`and an unclaimed remainder of the shoe indicated in broken lines.
`
`
`
`
`10 By assigning that label to the feature, we make no conclusions as to its
`scope. For reasons that follow, we need not and do not provide a textual
`explanation of the scope of that claimed feature, except to observe that the
`scope is defined by Figure 1 and illustrated as a solid line surrounded by
`concentric half ovals in the claimed heel region of the patented design.
`
`8
`
`
`
`IPR2017-00620
`Patent D723,783 S
`
`Another aspect of the patented design is shown in Figure 3,
`
`reproduced below.
`
`
`Id. at Fig. 3. Figure 3 is a lateral side view of the claimed heel portions of
`the shoe sole in solid lines and unclaimed remainder of the shoe.
`
`
`The Petition’s Lack of Analysis of the Channel Element
`The Petition identifies three ornamental features as “key elements of
`
`the design claimed in the ’783 patent.” Pet. 43, 63. When discussing the
`visual impression created by the patented design as a whole, Petitioner
`focuses on (1) “vertical sipes (or cracks)” located on the lateral “midsole”
`side surface (Pet. 43, 63; see Ex. 1001, Figs. 2–3); (2) “vertical grooves” that
`are located “between” those sipes (Pet. 43, 63; see Ex. 1001, Figs. 2–3); and
`(3) a portion of the heel on the bottom surface of the shoe sole having “a
`grid-like pattern of pads” (Pet. 43, 63; see Ex. 1001, Fig. 1). Patent Owner
`asserts that a “visually evident” ornamental feature is overlooked in the
`
`9
`
`
`
`IPR2017-00620
`Patent D723,783 S
`
`Petition—that is, the channel element. Resp. 16; see id. at 22 (including
`Illustration 11, prepared by Patent Owner’s declarant, Mr. Ball, identifying
`the channel element as a “[w]ide rounded channel”).
`In that regard, we agree with Patent Owner that the Petition does not
`identify the channel element, much less explain adequately the impact, if
`any, of the channel element on the overall visual impression created by the
`patented design. See generally Pet. Petitioner’s declarant, Mr. Anders,
`readily acknowledges that he did not take account of the channel element
`when he formed his opinion that the subject matter of the patented design
`would have been obvious over the asserted prior art references. Resp. 29–30
`(quoting Ex. 2048, 203:3–8; 204:13–17); see Ex. 1013 ¶ 66 (Mr. Anders,
`asserting in his first declaration that three features “comprise the overall
`appearance of the design claimed in the ’783 patent as they relate to the prior
`art”—none of which corresponds to the channel element); Ex. 1029 ¶¶ 16–
`17 (Mr. Anders, asserting in his second declaration that the channel element
`is an “unclaimed” feature of the patented design); but see Ex. 1029 ¶¶ 27–28
`(admitting that Figure 1 “shows some surface lines with light texture”); see
`also Resp. 25–26 (citing Ex. 2048, 109:19–110:6).
`
`
`The Analysis of the Channel Element Presented in the Response
`The channel element was identified in this proceeding for the first
`time by Patent Owner in the Response. Resp. 10–22. Patent Owner asserts
`that “the Petition ignored visually evident features of the claimed design”
`(id. at 10), including the channel element (id. at 15–16).11 Patent Owner
`
`
`11 Petitioner was afforded a full and fair opportunity to address those
`arguments in the Reply, but elected instead to stand behind the preliminary
`10
`
`
`
`IPR2017-00620
`Patent D723,783 S
`
`directs us to Mr. Ball’s testimony that “[t]he bottom view of the claimed
`design has a wide channel, which runs through the center of the shoe and
`through the claimed portion of the outsole.” Ex. 2039 ¶ 41; Resp. 15.
`Patent Owner argues, with support from Mr. Ball, that there exists in the
`patented design a channel element having “edges that terminate mostly
`within the claimed area before reaching the rearmost latitudinal sipe of the
`claimed portion.” Resp. 15 (citing Ex. 2039 ¶ 41). We agree with that
`assertion, which is supported by Figure 1 of the ’783 patent (Ex. 1001).
`We are persuaded that Figure 1 of the ’783 patent depicts the channel
`element in solid lines and, thereby, indicates that the feature impacts the
`visual impression of the patented design as a whole. Ex. 1001, Fig. 1 (solid
`line, near center of the claimed heel area, which is surrounded by concentric
`half ovals). We further are persuaded that Illustration 11, prepared by
`Mr. Ball, may be helpful to the reader in visualizing the relative placement
`and size of the channel element that is illustrated in Figure 1 of the ’783
`patent. Resp. 22 (reproducing Illustration 11). We reproduce Illustration 11
`below.
`
`
`claim construction set forth in our institution decision, which did not in our
`textual description mention explicitly the channel element. Reply 2–19;
`Dec. 7–10 (preliminary claim construction); see Egyptian Goddess, Inc. v.
`Swisa, Inc., 543 F.3d 665, 679 (Fed. Cir. 2008) (en banc) (With regard to
`design patents, it is well-settled that a design is represented better by an
`illustration than a description.). In the interests of reaching a fair result in
`this case, we granted Petitioner’s counsel leeway, at the final oral hearing, to
`address the visual impact of the channel element on the overall design, even
`though that issue was not addressed at all in the Petition, or adequately in the
`Reply. See, e.g., Tr. 7:11–10:4; 13:18–22:23.
`
`11
`
`
`
`IPR2017-00620
`Patent D723,783 S
`
`
`
`Resp. 22 (Illustration 11). Illustration 11 is a three-dimensional illustration
`of a shoe sole that identifies, among other features, an element near the
`center bottom surface of the shoe sole that is labelled “[w]ide rounded
`channel.” We emphasize that the scope of the challenged claim, however, is
`based on Figures 1–3 of the ’783 patent and not Illustration 11. Compare
`Ex. 1001, Figs. 1–3, with Resp. 22 (Illustration 11).
`
`
`The Analysis of the Channel Element Presented in the Reply
`We take note of the itemized list of reasons why, in Petitioner’s view,
`Illustration 11 “differs from the claimed design.” Reply 4–7. For example,
`Petitioner argues that the channel element illustrated in Figure 1 of the ’783
`patent is not necessarily “wide” or “rounded” in the patented design. Id.
`at 4. We agree. Nonetheless, there is no genuine dispute surrounding the
`
`12
`
`
`
`IPR2017-00620
`Patent D723,783 S
`
`question whether the patented design includes a feature that is defined in
`Figure 1 by a solid line and concentric half circles. Ex. 1001, Fig. 1.
`On that point, Petitioner, in the Reply, advances no less than nine
`figures that represent interpretations of the “surface lines” that define the
`channel element in Figure 1, all of which are illustrated in the Reply as a
`prominent ornamental feature. Reply 8; see id. at 12–16 (discussing a wide
`array of possible interpretations of the “surface lines” in Figure 1, including
`nine illustrations advanced by Petitioner, all of which demonstrate the
`prominent visual impact of all of those possibilities).
`Petitioner does not meaningfully dispute that the “surface lines” in
`Figure 1 denote a channel element that is part of the patented design.12
`Reply 8 (“Figure 1 shows surface lines in the center of the claimed region”).
`As such, the channel element contributes to the overall visual impression
`created by the patented design as a whole. Ex. 1001, Figs. 1–3. Even if we
`accept that the “surface lines” (Reply 8) in Figure 1 may represent any one
`of the nine configurations proposed by Petitioner, that does not undercut the
`fact that the feature is prominent (that is, it impacts the visual impression of
`the patented design as a whole). Reply 12–17 (proposing nine possible
`interpretations of the channel element, all of which appear, even in
`Petitioner’s illustrations, as prominent features of the patented design).
`
`
`12 Petitioner’s counsel acknowledged, during the final oral hearing, that the
`channel element is a feature of the claimed design. Tr. 8:14–21; see id.
`at 18:18–25 (Petitioner’s counsel, observing that “everyone agrees it’s a
`channel”).
`
`
`13
`
`
`
`IPR2017-00620
`Patent D723,783 S
`
`
`By way of example, we reproduce below the first of the nine figures
`proposed by Petitioner (Reply 13) as a possible interpretation of the “surface
`lines” (id. at 8) that define the channel element in Figure 1 of the ’783
`patent.
`
`
`Reply 13. The above figure contains three different views of the heel area of
`a bottom surface of a shoe sole wherein the heel area is bisected in the mid-
`heel region by a convex channel element.
`
`
`Findings Regarding the Channel Element
`The Petition does not identify the channel element and the Reply does
`not effectively explain its impact on the overall visual impression of the
`patented design. Instead, in the Reply, Petitioner advances argument that the
`Board should not consider the channel element as a feature of the patented
`design. See Pet. 36–39 (limiting claim construction analysis to three
`features, and ignoring the channel element); Reply 2–3, 7–12 (advancing
`argument that the channel element should not be interpreted as a feature of
`the patented design).
`
`14
`
`
`
`IPR2017-00620
`Patent D723,783 S
`
`
`Petitioner’s own asserted renderings of the channel element make
`plain that the feature impacts the visual impression of the patented design as
`a whole. Reply 12–17 (advancing nine visual interpretations of Figure 1 of
`the ’783 patent). We conclude that the channel element is a feature of the
`patented design and, moreover, it impacts the visual impression created by
`the design as a whole. Ex. 1001, Fig. 1 (solid line near center of the heel
`area that is surrounded by concentric half ovals); see Resp. 15 (citing
`Ex. 2039 ¶ 41) (Mr. Ball, providing persuasive opinion testimony regarding
`the placement and size of the channel element in the patented design).
`Petitioner’s own illustrations depict the channel element as a prominent
`feature that impacts the overall visual impression of the patented design.
`Reply 12–16 (advancing nine figures that, in Petitioner’s view, are possible
`interpretations of the “surface lines” (id. at 8) in Figure 1 of the ’783 patent
`that define the channel element).
`Arguably, the least visually significant interpretation of the channel
`element proposed by Petitioner is a feature that is “flat with the surrounding
`region having sipes”—but, even in Petitioner’s rendering of that
`interpretation, the channel element contributes to the overall impression of
`the patented design. Reply 16. We reproduce that illustration below.
`
`
`
`15
`
`
`
`IPR2017-00620
`Patent D723,783 S
`
`Id. The above figure is an illustration of two views of the heel area of a
`bottom surface of a shoe sole wherein the heel area is bisected in the mid-
`heel region by a flat channel element.
`We are persuaded on this record that a preponderance of the evidence
`shows that the channel element represents an ornamental feature of the
`patented design that contributes toward “the correct visual impression
`created by the patented design as a whole.” Durling, 101 F.3d at 103. We
`are persuaded also that a discussion of the channel element is necessary to
`any meaningful assessment of the overall visual impression of the patented
`design. It is a feature that bisects the claimed heel portion of the shoe sole,
`even in Petitioner’s view. Compare Reply 12–17 (Petitioner’s proposed
`renderings of the channel element), with Ex. 1001, Fig. 1 (solid line and
`concentric ovals that define the channel element). Under the circumstances,
`for reasons explained in the next section, Petitioner should have identified
`and discussed the channel element in the Petition.
`
`
`Additional Observations on the Dispute Surrounding the Channel Element
`Petitioner bears “the burden of proving a proposition of
`unpatentability by a preponderance of the evidence.” 35 U.S.C. § 316(e).
`Our rules require a successful petition to include “a detailed explanation of
`the significance of the evidence including material facts.” 37 C.F.R.
`§ 42.22(a)(2)). An issue bearing on the challenge is whether and how the
`claimed channel element impacts the “visual impression created by the
`patented design as a whole.” Durling, 101 F.3d at 103; see Ex. 1001, Fig. 1
`(solid concentric ovals, which depict a channel element near the center of the
`claimed grid-like pattern of pads).
`
`16
`
`
`
`IPR2017-00620
`Patent D723,783 S
`
`
`We are mindful of the dispute surrounding whether the solid line and
`concentric ovals that define the channel element in Figure 1 of the ’783
`patent represent, for example, a depression, a raised ornamental feature, or
`simply a two-dimensional pattern consisting of lines drawn on a flat surface.
`See Ex. 1001, Fig. 1 (showing solid lines that define and claim that feature);
`Reply 12–17 (exploring at least nine possible interpretations of the “surface
`lines” that represent the channel element). We are unpersuaded that
`resolution of that dispute is necessary to our analysis. It is enough for us to
`observe that the channel element is part of, and impacts the overall
`impression of, the claimed design. Tr. 8:1–10:3, 50:3–52:18 (discussing the
`dispute and confirming the parties’ agreement that the channel element is
`part of the claimed design).
`The Petition does not address the impact of the channel element on the
`overall visual impression of the claimed design. See generally Pet. And the
`Reply adheres to the preliminary claim construction that we provided in our
`institution decision, which was based on a preliminary record that did not
`identify explicitly the channel element. Reply 2–11; Dec. 7–10.
`In the Reply, however, Petitioner for the first time acknowledges the
`solid line and concentric ovals that represent the channel element in Figure 1
`of the ’783 patent. Reply 8 (referring to “surface lines in the center of the
`claimed region”). But, in the Reply, Petitioner does not explain adequately
`whether or how that feature impacts “the correct visual impression created
`by the patented design as a whole.” Durling, 101 F.3d at 103. Instead, as
`explained above, Petitioner asserts that “the surface lines” apparent in
`Figure 1 “can represent many features,” then proceeds to advance no less
`than nine possible interpretations, without explaining how any of them
`
`17
`
`
`
`IPR2017-00620
`Patent D723,783 S
`
`would fail to impact the overall visual impression of the patented design.
`Reply 12–18. Given these particular facts and circumstances, we determine
`that Petitioner fails to provide “a detailed explanation of the significance of
`the evidence” bearing on the extent to which the channel element contributes
`to the overall impression of the patented design. 37 C.F.R. § 42.22(a)(2));
`see supra n.10 (explaining that we afforded Petitioner’s counsel leeway at
`the final oral hearing to address that issue); cf. Tr. 23:1–26:16 (Petitioner’s
`counsel discussing de minimus changes in the context of a Rosen reference).
`Petitioner also does not identify adequately “[h]ow the challenged
`claim is to be construed.” 37 C.F.R. § 42.104(b)(3). The Petition nowhere
`mentions the channel element, and the Reply advances a plethora of possible
`interpretations of the channel element, without advancing any particular
`interpretation. Reply 12–17. On this record, we find that Petitioner fails to
`carry its “burden from the onset to show with particularity why the patent it
`challenges is unpatentable.” Harmonic Inc. v. Avid Tech., Inc., 815 F.3d
`1356, 1363 (Fed. Cir. 2016) (citing 35 U.S.C. § 312(a)(3) (requiring inter
`partes review petitions to identify “with particularity” by reference to the
`record “the evidence that supports the grounds for the challenge to each
`claim”)). That burden of persuasion, moreover, never shifts to Patent
`Owner. See Dynamic Drinkware, LLC v. Nat’l Graphics, Inc., 800 F.3d
`1375, 1378 (Fed. Cir. 2015) (discussing the burdens in our administrative
`review process).
`
`
`Conclusions Regarding the First Prong of the Durling Test
`A preponderance of the evidence supports a conclusion that Petitioner
`fails to take account adequately of the channel element of the patented
`
`18
`
`
`
`IPR2017-00620
`Patent D723,783 S
`
`design and, therefore, fails also to identify “the correct visual impression
`created by the patented design as a whole”—a required first step in
`identifying a Rosen reference. Durling, 101 F.3d at 103. That failure,
`standing alone, justifies our conclusion that Petitioner fails also to prove by a
`preponderance of the evidence that the challenged claim of the ’783 patent is
`unpatentable.
`We next turn to the second prong of the Durling test, which presents
`an independent basis for concluding that Petitioner fails to carry its burden
`of proving that the challenged claim is unpatentable.
`
`
`B. Petitioner Fails to Identify a Single Reference that
`Creates Basically the Same Visual Impression as the Patented Design
`In order to prevail, Petitioner must identify “a reference, a something
`in existence, the design characteristics of which are basically the same as the
`claimed design in order to support a holding of obviousness.” Rosen, 673
`F.2d at 391. The Durling test emphasizes that a Rosen reference is “a single
`reference that creates ‘basically the same’ visual impression” as the patented
`design. Durling, 101 F.3d at 103.
`The Petition asserts that RCD0007 and RCD0018 qualify as Rosen
`references. Pet. 43–50, 63–68; Reply 19–22 (additional arguments
`pertaining to RCD0007). We address each in turn below.
`
`
`RCD0007 (Ex. 1003)
`Petitioner asserts that RCD0007 qualifies as a Rosen reference
`because it discloses three “key elements” that are present in the patented
`design: (1) vertical sipes along the midsole side surface of the shoe; (2) in
`the medial view, vertical grooves along the center of the midsole between
`
`19
`
`
`
`IPR2017-00620
`Patent D723,783 S
`
`the sipes; and (3) a portion of the heel area on the bottom surface having a
`grid-like pattern of pads. Pet. 63. Petitioner does not account for the
`channel element of the patented design. Id. at 63–69.
`We reproduce below a side-by-side comparison of RCD0007 and the
`patented design that is advanced in the Petition. Pet. 65.
`
`
`
`Id. The above figure is an annotated composite illustration that compares
`ornamental features described as grooves located on a side surface of the
`patented design (Ex. 1001, Fig. 3 (annotated)) to ornamental features
`described as grooves located on a side surface design of RCD0007
`(Ex. 1003, Fig. 3 (annotated)).
`We reproduce below Petitioner’s figure that compares the heel regions
`of the respective designs.
`
`20
`
`
`
`IPR2017-00620
`Patent D723,783 S
`
`
`
`
`
`Pet. 66. The above figure is a composite illustration that compares the
`ornamental features located on the bottom surface of the patented design
`(Ex. 1001, Fig. 1 (annotated)) to the ornamental features located on the
`bottom surface of RCD0007 (Ex. 1002, Fig. 7 (annotated)).
`Petitioner does not establish that RCD007 “creates ‘basically the
`same’ visual impression” as the patented design, which includes the channel
`element. Durling, 101 F.3d at 103. Neither the Petition nor the Reply
`adequately accounts for the channel element, which is undeniably a feature
`of the patented design. See Tr. 8:14–21 (Petitioner’s counsel, identifying, by
`reference to Figure 1 of the ’783 patent, regarding the solid line and
`surrounding concentric ovals, “I think it goes without saying that something
`is depicted there”),18:18–25 (Petitioner’s counsel, observing that, as to that
`
`21
`
`
`
`IPR2017-00620
`Patent D723,783 S
`
`aspect of Figure 1, “everyone agrees it’s a channel”). As a result, the record
`contains no information from which we reasonably can conclude that
`RCD0007 qualifies as a Rosen reference by creating “basically the same”
`impression as the patented design as a whole, including the channel element.
`Durling, 101 F.3d at 103. The Petition should have raised and discussed the
`channel element as part of Petitioner’s case-in-chief. See Ex. 1001, Fig. 1
`(solid line and concentric ovals defining the channel element).
`
`Further, in the patented design, claimed ornamental features are
`located on the lateral (outward facing during normal wear) side surface of
`the shoe sole. Ex. 1001, Figs. 2–3. By contrast, in order to make out that
`RCD0007 qualifies as a Rosen reference, Petitioner relies on ornamental
`features (including a pattern of vertical grooves) that are located on the
`medial (inward facing during normal wear) side surface of the sole in
`RCD0007. Ex. 1003, Fig. 3. We appreciate the candor of Petitioner’s
`counsel in acknowledging that, when compared to RCD0007, those
`ornamental features are located “on the complete opposite side of the shoe”
`in the claimed design. Tr. 14:16–23. Patent Owner, for its part, directs us to
`a sketch prepared by Mr. Ball that illustrates that difference. Resp. 28
`(Illustration 13). We reproduce that sketch below.
`
`22
`
`
`
`IPR2017-00620
`Patent D723,783 S
`
`
`
`
`Id. The above figure is a composite illustration that shows Mr. Ball’s
`interpretation of differences between the ornamental features of the patented
`design as compared to the ornamental features of RCD0007. It is unclear on
`this record how or why RCD0007 creates basically the same visual
`impression as the patented design.
`Patent Owner argues, persuasively, that to apply RCD0007 as a Rosen
`reference, a designer of ordinary skill would be required to “move the
`vertical grooves from the medial side of RCD0007 to a lateral side surface.”
`Resp. 38. The designer would also need to ignore the existing “horizontal
`grooves taught by the lateral side view of RCD0007” and,
Accessing this document will incur an additional charge of $.
After purchase, you can access this document again without charge.
Accept $ Charge
Still Working On It
This document is taking longer than usual to download. This can happen if we need to contact the court directly to obtain the document and their servers are running slowly.
Give it another minute or two to complete, and then try the refresh button.
A few More Minutes ... Still Working
It can take up to 5 minutes for us to download a document if the court servers are running slowly.
Thank you for your continued patience.
This document could not be displayed.
We could not find this document within its docket. Please go back to the docket page and check the link. If that does not work, go back to the docket and refresh it to pull the newest information.
Your account does not support viewing this document.
You need a Paid Account to view this document. Click here to change your account type.
Your account does not support viewing this document.
Set your membership
status to view this document.
With a Docket Alarm membership, you'll
get a whole lot more, including:
- Up-to-date information for this case.
- Email alerts whenever there is an update.
- Full text search for other cases.
- Get email alerts whenever a new case matches your search.
One Moment Please
The filing “” is large (MB) and is being downloaded.
Please refresh this page in a few minutes to see if the filing has been downloaded. The filing will also be emailed to you when the download completes.
Your document is on its way!
If you do not receive the document in five minutes, contact support at support@docketalarm.com.
Sealed Document
We are unable to display this document, it may be under a court ordered seal.
If you have proper credentials to access the file, you may proceed directly to the court's system using your government issued username and password.
Access Government Site
