`
`Joseph J. Beaman, Jr.
`May 2017
`THE UNIVERSITY OF TEXAS AT AUSTIN
`Cockrell School of Engineering
`Resume
`
`TITLE: Professor
`FULL NAME: Joseph J. Beaman, Jr.
`ENDOWED POSITION: Earnest F. Gloyna Regents Chair in DEPARTMENT: Mechanical
`Engineering
`
`EDUCATION:
`Sc.D., Mechanical Engineering, Massachusetts Institute of Technology, Cambridge,
`Massachusetts, 1979
`M.S., Mechanical Engineering, The University of Texas at Austin, Austin, TX, 1975
`B.S., Mechanical Engineering, The University of Texas at Austin, Austin, TX, 1972
`
`LAST 4 YEARS TESTIMONY:
`Effingo Wireless v Motorola Mobility, US District Court, Western District of Texas, San
`Antonio Division, testified for defense. (2013)
`Terumo v Lepu Medical Technology and Vascular Solutions, US District Court, District
`of New Jersey, Deposition only. (2013)
`Retractable Technologies and Thomas Shaw v Becton Dickinson, US District Court,
`Eastern District of Texas, Tyler Division, testified for defense. (2013)
`L.C. Eldridge Sales v Azen Manufacturing, US District Court, Eastern District of Texas,
`Tyler Division, testified for defense. (2013)
`HNI Corp and Allsteel v Dirtt Environmental Solutions, Patent Trial and Appeal Board,
`IPR 2015-01690, Deposition only. (2016)
`Intex Recreation v Bestway Inflatables & Material, Patent Trial and Appeal Board, IPR
`2016-00180, Deposition only. (2016)
`Whirlpool Corp v TST Water, LLC, US District Court, Eastern District of Texas,
`Marshall Division, testified for plaintiff, (2017)
`Cutsforth v Lemm Liquidating, Fulmer, Westinghouse Air Brake, Motive Power, US
`District Court, District of Minnesota, Deposition only (2017)
`
`
`PROFESSIONAL REGISTRATION:
`TX, 50385
`
`CURRENT AND PREVIOUS ACADEMIC POSITIONS:
`2001 - present, The University of Texas at Austin, Earnest F. Gloyna Regents Chair in
`Engineering
`2012 – present, Director Advanced Manufacturing & Design Center
`2001 - 2012, The University of Texas at Austin, Chair, Department of Mechanical
`Engineering
`2001 - 2002, The University of Texas at Austin, Ernest Cockrell, Jr., Memorial Chair in
`Engineering
`
`
`
`1
`
`INTELLECTUAL VENTURES II EX. 2005
`Toyota Motor v. Intellectual Ventures II
`IPR2017-01494
`
`

`

`
`
`1991 - 2001, The University of Texas at Austin, Andersen Consulting Endowed
`Professorship
`1990 - 1991, The University of Texas at Austin, Temple Foundation Endowed Faculty
`Fellowship
`1989 - present, The University of Texas at Austin, Professor
`1985 - 1989, The University of Texas at Austin, Associate Professor
`1979 - 1985, The University of Texas at Austin, Assistant Professor
`1979 - 1979, MIT, Visiting Assistant Professor
`1976 - 1978, MIT, Instructor
`1972 - 1974, The University of Texas at Austin, Teaching Assistant
`
`OTHER PROFESSIONAL EXPERIENCE:
`7/1975 - 8/1975, IBM Austin, Senior Associate Engineer, Analysis & Design
`5/1974 - 9/1975, IBM Austin, Associate Engineer, Analysis & Design
`1990 - 1992, DTM Corporation, CTO, Product Development
`
`HONORS AND AWARDS:
`Tau Beta Pi (1970)
`BS with High Honors, University of Texas at Austin (1972)
`Phi Kappa Phi (1970)
`MIT Fellowship, Cambridge, MA (1976)
`Best Paper Award, Journal of Dynamic Systems Measurement and Control, University of
`Texas at Austin (1983)
`DuPont Young Faculty Award, University of Texas at Austin (1983)
`Engineering Foundation Award, University of Texas at Austin (1984)
`NSF Presidential Young Investigator Award, University of Texas at Austin (1984)
`Myron L. Begeman Faculty Fellow, University of Texas at Austin (1987)
`Halliburton Foundation Award of Excellence, University of Texas at Austin (1989)
`Engineering Foundation Endowed Faculty Fellowship in Engineering, Number 5,
`University of Texas at Austin (1990)
`Andersen Consulting Endowed Professorship in Manufacturing Systems Engineering,
`University of Texas at Austin (1992)
`Fellow, American Society of Mechanical Engineers (1996-present)
`Listed in Who's Who in Science and Engineering (1996-2004)
`Literati Club Outstanding Paper Award, Rapid Prototyping Journal, West Yorkshire,
`England (October 1996)
`Listed in Who's Who in Finance and Industry (1997-2004)
`Member, Advisory Board of the Rapid Prototyping Association, Society of
`Manufacturing Engineers (January 1998-December 1999)
`Best Paper Award, American Vacuum Society, Santa Fe, NM (2001)
`Listed in Who's Who Among America's Teachers (2001-2003)
`Joe J. King Professional Engineering Achievement Award, College of Engineering
`(2002)
`Women in Engineering Advocate Award, The University of Texas at Austin - Women in
`Engineering Program (2008)
`
`
`
`2
`
`

`

`
`
`Distinguished Mechanical Engineer, Department of Mechanical Engineering, The
`University of Texas at Austin (2011)
`Elected Society of Manufacturing Board of Directors, SME (2012-2014)
`Nominated and Appointed US Army Science Board, US Army (2012-2015)
`Elected National Academy of Engineers (2013)
`Freeform and Additive Manufacturing Excellence Award, SFF Conference, (2014)
`Elected Fellow of the National Academy of Inventors, (2015)
`SME Albert M. Sargent Progress Award for significant accomplishments in the field of
`manufacturing processes, methods, or systems, 2016.
`Elected Fellow of Society of Manufacturing (SME) (2016)
`NAE Mechanical Engineering Peer Committee (2018-2021)
`
`
`OTHER PROFESSIONAL HIGHLIGHTS:
`Invited participant on Japanese Technology Evaluation Center Panel Report on Rapid
`Prototyping in Japan and Europe (1996)
`Founder of DTM Corporation, 1990, grew to $25 million in sales before being acquired
`by 3D Systems in 2001.
`Listed in Naval Research Reviews, Profiles in Science, Office of Naval Research,
`Three/1998, Volume I, page 4 (January 1999)
`Moderator for Session on Process Development and Research at the Rapid Prototyping
`and Manufacturing 1999 Conference and Exposition, Chicago, IL (April 21, 1999)
`Selected for Final Site Visit for NSF Engineering Research Center Proposal submitted
`with Southern Methodist University and Rice University (February 2000)
`Chair of World Technology Evaluation Center Panel on Additive/Subtractive
`Manufacturing, 2001.
`NSF Council of Visitors for the Design and Manufacture Academic Programs of the
`Division of Design, Manufacture and Industrial Innovation of the Engineering
`Directorate of the National Science Foundation.
`Served as invited External Reviewer for the Academic Assessment Process, Department
`of Mechanical Engineering, School of Engineering at the University of Connecticut.
`(Spring 2003)
`Invited Chair of Expert Review Panel for the IMCRC at Loughborouh University.
`Purpose was an in-depth review of the IMCRC by the Innovative Manufacturing and
`Construction Research Centre. (2007)
`Invited Member, Global Summit on the Future of Mechanical Engineering, Washington,
`DC (2008)
`Chair Evaluation Committee, EPSRC Center in Additive Manufacturing, Nottingham,
`UK, (2014)
`Guest Editor, Special Issue on Additive Manufacturing, Journal Manufacturing Science,
`ASME, 2014-2015
`
`MEMBERSHIPS IN PROFESSIONAL AND HONORARY SOCIETIES:
`ASME International, American Society of Mechanical Engineers
`SME, Society of Manufacturing Engineers
`SME/RPA, Rapid Prototyping Association
`
`
`
`3
`
`

`

`
`
`ASEE, American Society for Engineering Education
`ASM International, The Materials Information Society
`SCS, Society for Computer Simulation
`AAAS, American Association for the Advancement of Science
`MRS, Materials Research Society
`TMS, The Minerals, Metals & Materials Society
`
`PROFESSIONAL SOCIETY AND MAJOR GOVERNMENTAL COMMITTEES:
`ASME International, Dynamic Systems and Control Division Executive Committee,
`(1979-present)
`Rapid Prototyping Association of Society of Manufacturing Engineers, (1998-present)
`Rapid Prototyping Association of Society of Manufacturing Engineers, Advisory Board,
`(1998-2001)
`RPA/SME, Rapid Prototyping Association of Society of Manufacturing Engineers,
`Executive Committee, (2000-2001)
`ASME International, Mechanical Engineering Department Heads Committee, (2001-
`2011)
`ASEE, American Society for Engineering Education, Department Heads Committee,
`(2002-2011)
`National Science Foundation, Committee of Visitors for the Design and Manufacture
`Academic Programs of the Division of Design, Manufacture and Industrial Innovation of
`the Engineering Directorate of NSF, (2003)
`World Technology Evaluation Center, WTEC Panel on Additive/Subtractive
`Manufacturing, (2003-2011)
`Specialty Metals Processing Consortium, SMPC Technical Committee, (2005-present)
`St. Andrew's School, Austin TX, Board of Trustees, (2007-2014)
`ASME International, Systems and Design Technical Group Leader, (2008-2011)
`ASME International, TCOB Committee on Technology Policy, (2008-2011)
`ASME International, Emerging Technology Committee, (2009-2012)
`South Dakota School of Mines and Technology, Board of Regents External Review
`Committee, (October 2009)
`ASME International, Leonardo da Vinci Award Committee, (2010-2012)
`ASME International, Mechanical Engineering Department Heads Executive Committee,
`(2010-2012)
`United States Army, Army Science Board, (January 2012-2015)
`Technical Editor for ASME Journal of Dynamic Systems Measurement and Control
`(2013 – present)
`
`CONFERENCES ORGANIZED/CHAIRED:
`A. Symposia and Conference Organizer
`Local Organizer and Conference Host, Liquid Metals Processing Conference,
`Austin (Fall 2013)
`Co-organizer, Solid Freeform Fabrication Symposium, Austin, TX (1989-present)
`NSF/ASME Workshop on Research Needs for Control in Mechanical Systems,
`Seattle (June 1986)
`Program Chair, Dynamic Systems Control Division, ASME (1984)
`
`
`
`
`
`4
`
`

`

`
`
`B. Session Chairman
`Session Chair, ASME Dynamic Systems and Control Conference, Ann Arbor, MI
`(October 2008)
`Session Chair, NSF Workshop Redefining Mechanical Engineering with Adnan
`Akay, Carnegie Mellon University (January 25-27, 2002)
`Session Chair, Issues in Structured Physical Modeling, ACC (1987)
`
`
`
`UNIVERSITY COMMITTEES:
`The University of Texas at Austin, Budget Council, (1989-present)
`The University of Texas at Austin, Manufacturing Systems Program Executive
`Committee, (1989-2005)
`The University of Texas at Austin, College of Engineering representative to the Faculty
`Council, (1998-2000)
`The University of Texas at Austin, Research Policy Committee of Faculty Council,
`(1999-2000)
`The University of Texas at Austin, Advisory Panel, Center for Electromechanics, (2007-
`2012)
`The University of Texas at Austin, Review Committee for the Institute for
`Electrochemistry, (2010)
`The University of Texas at Austin, Rio Grande Valley Manufacturing Initiative, (March
`2010-present)
`
`SCHOOL COMMITTEES:
`Cockrell School of Engineering, Faculty Salary Review Committee, (1989-2011)
`College of Engineering, Promotion & Tenure Review Committee, (1997-1999)
`College of Engineering, Strategic Plan, (1999-2000)
`Cockrell School of Engineering, Reactor Oversight Committee, (2005-present)
`Cockrell School of Engineering, IT Committee, (2006-2011)
`Cockrell School of Engineering, Strategic Planning, (2008-2011)
`The University of Texas at Austin, SBES Computational Cardiovascular Engineering
`Subcommittee, (2009-2011)
`
`DEPARTMENT COMMITTEES:
`Mechanical Engineering, Qualifying Exams for Mechanical Systems and Design, (1996-
`1999)
`Mechanical Engineering, Strategic Planning Committee, (1998-present)
`Department of Mechanical Engineering, Faculty Recruiting, (2000-2001)
`Department of Mechanical Engineering, Assisted organization of University-wide
`initiative with Ford Motor Company resulting in 6 initiatives for the ME Department and
`responsible for managing grant funds totaling $3,450,000, (Spring 2001)
`
`PUBLICATIONS:
`
`A. Refereed Archival Journals
`
`
`
`
`5
`
`

`

`
`
`
`
`1. Ojinnaka, M., J. Beaman"Full-Course Drilling Model for Well Monitoring
`and Stochastic Estimation of Kick", J Petrol Science and Engineering,
`accepted, 2018.
`2. Michael R. Gardner, Adam Lewis, Jongwan Park, Austin B. McElroy, Arnold
`D. Estrada, Scott Fish, Joseph J. Beaman, Thomas E. Milner, "In-situ process
`monitoring in selective laser sintering using optical coherence
`tomography," Opt. Eng. 57(4), 041407 (2018).
`3. Zhang, L, T. Phillips, A. Mok, D. Moser, J. Beaman, “Automatic Laser
`Control System for Selective Laser Sintering”, Transactions on Industrial
`Informatics, IEEE, submitted, 11, 2017.
`4. Wroe, W., J. Gladstone, T. Phillips, S. Fish, J. Beaman, A. McElroy, ),”In-
`situ thermal image correlation with mechanical properties of nylon-12 in
`SLS”, Rapid Prototyping Journal, Vol. 22, No 5 pp 794 – 800, 2016.
`5. Diller, T.T., M. Yaun, D.L. Bourell, J. Beaman, “Thermal model and
`measurements of polymer laser sintering”, Rapid Prototyping Journal, 21#1,
`(2015), pp. 2-13.
`6. J. Beaman, F. Lopez , “The emerging nexus of cyber, modeling, and
`estimation in advanced manufacturing: Vacuum arc remelting to 3D printing
`,” ASME Dynamic Systems and Control Magazine, December 2014.
`7. Fish, S., J.C. Booth, S.T. Kubiak, W.W. Wroe, A.D. Bryant, D.R. Moser, J.J.
`Beaman, “Design and Subsystem Development, of a High Temperature
`Selective Laser Sintering Machine for Enhanced Process Monitoring and
`Control,” Additive Manufacturing, Elsevier, December 2014.
`8. Felipe Lopez, Lixun Zhang, Aloysius Mok, and Joseph Beaman. 2015.
`Particle filtering on GPU architectures for manufacturing applications.
`Comput. Ind. 71, C (August 2015), 116-127.
`9. Devaraj, V., F. Lopez, J. Beaman and S. Prudhomme. "Model-based control
`of a continuous coating line for Proton Exchange Membrane Fuel Cell
`Electrode Assembly," International Journal of Chemical Engineering, Article
`ID 572983, January 2015, doi:10.1155/2015/572983.
`10. Beaman, J., F. Lopez, R. Williamson. "Modeling of the Vacuum Arc
`Remelting Process for Estimation and Control of the Liquid Pool Profile",
`ASME Journal of Dynamic Systems, Measurements and Control, May 2014,
`Vol. 136.
`11. Yaun, M., T.J. Diller, D. Bourell, J. Beaman, “Thermal Conductivity of
`Polyamide 12 Powder for Use in Laser Sintering”, Rapid Prototyping Journal,
`V0l. 19, No. 6, 2013, pp. 437-445.
`12. Williamson, R.L., Beaman, J.J., "Modern Control Theory Applied to
`Remelting of Superalloys," Materials Science Forum, Vol. 706-709, 2012, pp.
`2484-2489, (2012)
`13. Silverman, T.J. Meyers, J.P. and Beaman, J.J., "Dynamic Thermal, Transport
`and Mechanical Model of Fuel Cell Membrane Swelling," Fuel Cells, Vol. 11,
`2011, No. 6, pp. 875-887
`14. Ahn, S., Beaman, J.J., Williamson, R.L., Melgaard, D.L. , "Electroslag
`remelting process using unscented Kalman filter," Journal Of Dynamic
`
`6
`
`

`

`
`
`
`
`Systems, Measurement, And Control, Vol. 132, 2010, No. January 2010, pp.
`011011-2 (9 pages)
`15. Silverman, T.J., Meyers, J.P., Beaman, J.J., "Modeling Water Transport and
`Swelling in Polymer Electrolyte Membranes," Journal Of The
`Electrochemical Society, Vol. 157, 2010, No. 10, pp. B1376-B1381
`16. Silverman, T.J., Meyers, J.P. and Beaman, J.J. , "Modeling Water Transport
`and Swelling in Polymer Electrolyte Membranes," Journal of The
`Electrochemical Society, Vol. 157, 2010, No. 10, pp. B1376-B1381
`17. Stevinson, B., Bourell, D.L., Beaman, J.J., "Over-infiltration mechanisms in
`selective laser sintered Si/SiC preforms," Rapid Prototyping Journal, Vol. 14,
`2008, No. 3, pp. 149-154
`18. Stevinson, B., Bourell, D.L., Beaman, J.J., "Dimensional stability during post-
`processing of selective laser sintered ceramic preforms," Virtual And Physical
`Prototyping, Vol. 1, January 2007, No. 4, pp. 209-216
`19. Evans, R.S., Bourell, D.L., Beaman, J.J., Campbell, M.I., "Rapid
`Manufacturing of Silicon Carbide Composites,” Rapid Prototyping Journal,
`Vol. 11, 2005, No. 1, pp. 37-40
`20. King, C.W., Campbell, M.I., Beaman, J.J., Sreenivasan, S.V., "Synthesis of
`Multistable Equilibrium Linkage Systems Using an Optimization Approach,"
`Structural And Multidisciplinary Optimization, Vol. ISSN 1615-147X, 2005,
`pp.1615-1488
`21. King, C.W., Campbell, M.I., Beaman, J.J., Sreenivasan, S.V., "Synthesis of
`Multistable Equilibrium Linkage System Using an Optimization Approach,"
`Structural And Multidisciplinary Optimization, Vol. 158, 2004, pp. 1-26
`22. King, C.W., Beaman, J.J., Sreenivasan, S.V., Campbell, M.I., "Multi-Stable
`Equilibrium System Design Methodology and Demonstration," Journal Of
`Mechanical Design, Vol. 126, 2004, No. 6, pp. 1036-1046
`23. Williamson, R.L., Beaman, J.J., "A Demonstration of Melt Rate Control
`During VAR of "Cracked" Electrodes," Journal of Materials Science, Vol. 39,
`2004, No. 24, pp. 7161-7168
`24. Bourell, D.L., Beaman, J.J., Marcus, H.L., Barlow, J.W., Deckard, C.R. ,
`"Chronology and Current Processes for Freeform Fabrication," Journal of The
`Japan Society Of Powder And Powder Metallurgy, Vol. 50, November 2003,
`No. 11, pp. 981-991
`25. Wang, H.Y., Bourell, D.L., Beaman, J.J., "Laser Polishing of Silica Slotted
`Rods," Materials Science And Technology, Vol. 19, March 2003, pp. 382 -
`387
`26. Dutson, A.J., Wood, K.L., Beaman, J.J., Crawford, R.H., Bourell, D.L.,
`"Application of Similitude Techniques to Functional testing of Rapid
`Prototypes," Rapid Prototyping Journal, Vol. 9, 2003, No. 1, pp. 6-13.
`27. Ramos, J.A., Bourell, D.L., Beaman, J.J. , "Surface Over-Melt During Laser
`Polishing of Indirect-SLS Metal Parts," Mat. Res. Soc. Symp. Proc., Vol. 758,
`2003, pp. 53 - 61
`28. Dutson, A.J., Wood, K.L., Beaman, J.J., Crawford, R.H., Bourell, D.L.,
`"Application of Similitude Techniques to Functional Testing of Rapid
`Prototypes," Rapid Prototyping Journal, Vol. 9, 2003, No. 1, pp. 6-13
`
`7
`
`

`

`
`
`
`
`29. Bourell, D.L., Wohlert, M., Harlan, N., Das, S., Beaman, J.J. , "Powder
`Densification Maps in Selective Laser Sintering," Journal Of Advanced
`Engineering Materials, 2002.
`30. 21. Wang, H.Y., Bourell, D.L., Beaman, J.J. , "Laser Polishing of Silica
`Slotted Rods," Materials Science And Technology, 2002
`31. 22. Harlan, N.R., Reyes, D., Bourell, D.L., Beaman, J.J., "Titanium Castings
`Using Laser-Scanned Data and Selective Laser-Sintered Zirconia Molds,"
`Journal Of Materials Engineering and Performance, 2001
`32. Bourell D.L., Beaman, J.J., Klosterman, D., Gibson, I., Bandyopadhyah, A.,
`"Rapid Prototyping," ASM Materials Handbook On Composites, Vol. 21,
`2001, pp. 383-387
`33. Harlan, N.R., Reyes, R., Bourell, D.L., Beaman, J.J., "Titanium Castings
`Using Laser-Scanned Data and Selective Laser-Sintered Zirconia Molds,"
`Journal of Materials Engineering And Performance, Vol. 10 (4), 2001, pp.
`410-413.
`34. Das, S., Fuesting, T.P., Danyo, G., Brown, L.E., Beaman, J.J., Bourell, D.L.,
`"Direct Laser Fabrication of Superalloy Cermet Abrasive Turbine Blade
`Tips," Journal of Materials And Design, Vol. 21, 2000, No. 2, pp. 63-73
`35. Das, S., Fuesting, T., Danyo, G., Bourell, D.L., Beaman, J.J., "Direct Laser
`Fabrication of a Gas Turbine Engine Component," Materials And Design,
`August 1999.
`36. Das, S., Wohlert, M., Bourell, D.L. and Beaman, J.J., "Processing of Titanium
`Net Shapes by SLS/HIP," Materials And Design, Vol. 20, June 1999, pp. 115-
`121.
`37. Das, S., Wohlert, M., Beaman, J.J., Bourell, D.L., "Producing Metal Parts by
`Selective Laser Sintering/Hot Isostatic Pressing," Journal of Metals, Vol. 50,
`December 1998, No. 12.
`38. Das, S., Wohlert, M., Bourell, D.L. and Beaman, J.J., "Microstructure and
`Mechanical Properties of Metal Parts Produced by SLS/HIP," Journal of
`Metals, November 1998.
`39. Melgaard, D., Williamson, R.L., Beaman, J.J., "Controlling Remelting
`Processes for Superalloys and Aerospace Ti Alloys," Journal of Metals,
`March 1998, pp. 13-17.
`40. Das, S., Wohlert, M., Bourell, D.L., Beaman, J.J., "Direct Laser Freeform
`Fabrication of High Performance Metal Components," Rapid Prototyping
`Journal, Vol. 4, 1998, No. 3.
`41. Das, S., Fuesting, T., Brown, L.E., Harlan, N., Lee, G., Beaman, J.J., Bourell,
`D.L., Barlow, J.W., Sargent, K., "Direct SLS Processing for Production of
`Cermet Composite Turbine Sealing Components," Journal of Materials And
`Manufacturing Processes, Vol. 13, 1998, No. 3.
`42. Barlow, J.W., Beaman, J.J., Badrinarayan, A., "A Rapid-Mould making
`System: Material Properties and Design Considerations ," Rapid Prototyping
`Journal, Vol. 2 , 1996.
`43. Beaman, J.J., "A Rapid Mould-Making System: Material Properties and
`design Considerations," Rapid Prototyping Journal, Vol. 2, 1996, No. 3.
`
`8
`
`

`

`
`
`
`
`44. Agarawala, M., Bourell, D.L., Beaman, J.J., Marcus, H.L., and Barlow, J.W.,
`"Direct Selective Laser Sintering of Metals," Rapid Prototyping Journal, Vol.
`1, 1995, No. 1.
`45. Nelson, J.C., Vail, N.K., Barlow, J.W., Beaman, J.J., Bourell, D.L., Marcus,
`H.L., "Selective Laser Sintering of Polymer-Coated Silicon Carbide
`Powders," Industrial And Engineering Chemistry Research, Vol. 34, 1995, pp.
`1641-1651.
`46. Schreuders, P.D., Diller, K.R., Beaman, J.J., Paynter, H.M., "An Analysis of
`Coupled Multicomponent Diffusion in Interstitial Tissue," Journal Of
`Biomechanical Engineering, Vol. 116, May 1994, pp. 164-171.
`47. Schreuders, P., Diller, K.R., Beaman, J.J., Paynter H.M., Clark, D., "Kinetic
`Analysis of Coupled Interstitial Multicomponent Diffusion," Network
`Thermodynamics, Heat And Mass Transfer In Biotechnology, Vol. 116, 1994,
`pp.164-171
`48. Longoria, R.G., Miksad, R.W., Beaman, J.J., "Frequency Domain Analysis of
`In-Line Forces on Circular Cylinders in Random Oscillatory Flow," Journal of
`Offshore Mechanics And Arctic Engineering, Vol. 115, February 1993, pp.
`23-30
`49. Nelson, C., Xue, S., Barlow, J.W., Beaman, J.J., Marcus, H.L., Bourell, D.L. ,
`"Model of the Selective Laser Sintering of Bisphenol-A Polycarbonate,"
`Industrial Engineering Chemical Research, Vol. 32, 1993, pp. 2305-2317
`50. Marcus, H.L., Zong, G., Wu, Y., Bourell, D.L., Beaman, J.J., "Direct Solid
`Freeform Fabrication of High Temperature Materials Using Selective Laser
`Sintering," The Minerals, Metals And Materials Society, March 14, 1992.
`51. Beaman, J.J., Bourell, D.L., Marcus, H.L., Barlow, J.W. , "Selective Laser
`Sintering of Metals and Ceramics," The International Journal of Powder
`Metallurgy, Vol. 28, 1992, No. 4
`52. Paynter, H.M., Beaman, J.J., "On the Fall and Rise of the Circuit Concept:
`Contrasting Views of Network Thermo and Chemical Networking," Journal of
`Franklin Institute, 1991.
`53. da Silva, R., Wood, K.L., Beaman, J.J., "A Theory for Geometric Query
`Processing in Engineering Design and Manufacture," Journal Of Computer
`Aided Design, 1991.
`54. da Silva, R., Wood, K.L., Beaman, J.J., "Engineering Design Calculations
`with Fuzzy Parameters," International Journal Of Fuzzy Sets And Systems,
`1991.
`55. Beaman, J.J., Lin, C.H., "Application of Nonlinear Quadratic Stochastic
`Control to a Position Servomechanism," Journal of Dynamic Systems,
`Measurement And Control, December, 1990.
`56. da Silva, R., Wood, K.L., Beaman, J.J., "Interacting and Interfeature Relations
`in Engineering Design for Manufacture," Journal Of Systems Automation,
`Research And Applications- Special Issue, November 12, 1990.
`57. Marcus, H.L., Beaman, J.J., Barlow, J.W., Bourell, D.L., "Solid Freeform
`Fabrication: Powder Processing," Ceramic Bulletin, Vol. 69, April 1990, No.
`6.
`
`9
`
`

`

`
`
`58. Marcus, H.L., Beaman, J.J., Barlow, J.W.,Bourell, D.L., "Solid Freeform
`Fabrication: Design and Powder Processing," Journal Of The Minerals, Metals
`And Materials Society, April 1990, pp. 8-10.
`59. Beaman, J.J., Lin, C.H., "Application of Nonlinear Quadratic Stochastic
`Control to a Position Servomechanism," Journal Of Dynamic Systems,
`Measurement And Control, September 1989.
`60. Beaman, J.J, Breedveld, P., "Physical Modeling with Eulerian Frames and
`Bond Graphs," Journal Dynamic Systems, Measurement And Control, June
`1988.
`61. Beaman, J.J., Rosenberg, R.C. , "Constitutive and Modulation Structure in
`Bond Graph Modeling," Journal Of Dynamic
`62. Systems, Measurement And Control, June 1988
`63. Ingrim, M.E., Masada, G.Y., Beaman, J.J., "Bond Graph Reticulation of
`Galerkin Approximations in Thermoelasticity," Automated Modeling In
`Physical Systems, 1988.
`64. Beaman, J.J., Wang, S.Y., Masada, G.Y. , "Cycle Time Control of a Pressure
`Swing Oxygen Generation System," Aviation Space And Environmental
`Medicine, Vol. 58, December 1987, pp. 1225-1229.
`65. Diller, K.R., Beaman, J.J., McCaa, C., Montoya, J.P., Takahashi, T.,
`"Analysis of the Osmotic Response of Human Monocytes to Freezing with a
`Cryoprotective Additive," Modeling And Simulation, Vol. 18, 1987.
`66. Montoya, J.P., Diller, K.R., Beaman, J.J., Breedveld, P.C., "A Network
`Thermodynamic Model for Coupled Membrane Transport: Application to Cell
`Cryopreservation," Journal Of Heat Transfer, 1987
`67. Khonsari, M., Beaman, J.J., "Thermohydrodynamics Analysis of Journal
`Bearings: A Study of Boundary Conditions," ASLE Journal, April 1986
`68. Beaman, J.J., "A Dynamic Model of a Pressure Swing Oxygen Generation
`System," Journal Of Dynamic Systems, Measurement and Control, June 1985
`69. Beaman, J.J., "Nonlinear Quadratic Gaussian Control," Int. Jour. Control,
`February 1984
`70. Beaman, J.J., Healey, A.J., Werlin, J. , "A Dynamic Model of a Molecular
`Sieve Bed with Nonlinear and Coupled Isotherms," Journal Of Dynamic
`Systems, Measurement And Control, December 1983
`71. Pottebaum, K.L., Beaman, J.J., "A Dynamic Model of a Concentric LADD
`Actuator," Journal Of Dynamic Systems Measurement And Control,
`September 1983, pp. 157-164
`72. Beaman, J.J., Hedrick, J.K., "Improved Statistical Linearization for Analysis
`and Control of Nonlinear Stochastic Systems: Part I: An Extended Statistical
`Linearization Technique," Journal Of Dynamic Systems, Measurement And
`Control, March 1981, pp. 14-21
`
`
`B. Refereed Conference Proceedings
`1. Beaman, J.J., "Application of Statistical Linearization and LQG Design to
`Position Control," Proceedings Of The 1983 American Control Conference
`(ACC), San Francisco, CA, pp 127-131, June 1983
`
`
`
`10
`
`

`

`
`
`
`
`2. Beaman, J.J., "Application of NQG Control with Uncertain and Incomplete
`Measurements," Proceedings Of The 1984 American Control Conference (ACC),
`San Diego, CA, June 1984
`3. Beaman, J.J., Montoya, J.P., Diller, K.R., Breedveld, P.C., "A Network
`Thermodynamic Model for Coupled Membrane Transport: Application to Cell
`Cryopreservation," Proceedings Of The 1987 ASME-JSME Thermal Engineering
`Joint Conference, edited by P. J. Marto and I. Tanasawa, published by ASME,
`New York, Vol. 3, pp 537-542, 1987
`4. Beaman, J.J., Deckard, C.R. , "Solid Freeform Fabrication and Selective Powder
`Sintering," 15th North American Manufacturing Research Proceedings, May 1987
`5. Beaman, J.J., Rosenberg, R.C., "Additional Structure in Bond Graph Modeling,"
`Proceedings Of The 1987 American Control Conference (ACC), Minneapolis,
`June 1987
`6. Beaman, J.J., Rosenberg, R.C., "Clarifying Energy Storage Field Structure in
`Dynamic Systems," Proceedings Of The 1987 American Control Conference
`(ACC), Minneapolis, June 1987
`7. Beaman, J.J., Sun, M.M., Barlow, J., Nelson, C., "The Role of Solid Freeform
`Fabrication in Investment Casting," Proceedings At The 1989 Vacuum
`Metallurgy Conference On The Melting And Processing Of Specialty Materials,
`Pittsburgh, PA, May 1989
`8. Beaman, J.J., Munkvold, G., "Removal of Toxic Catalytic Oxidation Products Via
`Adsorption," 1989 US Army Chemical Research, Development And Engineering
`Center Conference, Aberdeen Proving Ground, MD, November 1989
`9. Beaman, J.J., Munkvold, G., "Onboard Oxygen Generation Systems Modeling:
`Three Component Feeds," SAFE Association Symposium, New Orleans, LA,
`December 1989
`10. Beaman, J.J., Longoria, R.G., Miksad, R.K., "Nonlinear Hydrodynamic Forces in
`Random Oscillatory Flow," The First European Offshore Mechanics Symposium,
`Trondheim, Norway, August 21, 1990
`11. Beaman, J.J., Wood, K., da Silva, R., "Representing and Manipulating Interacting
`and InterFeature Relationships in Engineering Design for Manufacture," 1990
`ASME Design Automation Conference, Chicago, IL, September 16-19, 1990
`12. Matthews, R.D., Dongre, S., Beaman, J.J., "Intake and ECM Submodel
`Improvements for Dynamic SI Engine Models: Examination of Tip-In/Tip-Out,"
`Proceedings Of Society Of Automotive Engineers, January 1991
`13. da Silva, R., Wood, K.L., Beaman, J.J., "An Algebraic Approach to Geometric
`Query Processing in CAD/CAM Applications," Proceedings Of The ACM 1991,
`Association Of Computing Machinery 1991 Symposium On Solid Modeling
`Foundations And CAD/CAM Applications, pp 73-86, 1991
`14. Wood, K.L, Otto, K.N., Antonsson, E.K., Beaman, J.J., "Engineering Design
`Calculations Under Uncertainty," International Fuzzy Engineering Symposium,
`Yokohama, Japan, 1991
`15. Munkvold, G.D, Teague, K.G., Edgar, T.F., Beaman, J.J., "Prediction of Bed
`Pressure Profiles in OBOGS," Proceedings Of The 1992 SAFE Conference, 1993
`16. Marcus, H.L., Bourell, D.L., Beaman, J.J., Manthiram, A., Barlow, J.W.,
`Crawford, R.H., "Challenges in Laser Processed Solid Freeform Fabrication," The
`
`11
`
`

`

`
`
`
`
`Minerals, Metals And Materials Society Symposium Proceedings, Processing And
`Fabrication Of Advanced Materials III, Pittsburgh, PA, October 17, 1993
`17. Agarawala, M.K., Bourell, D.L., Beaman, J.J., Wu, B., Marcus, H.L., Crawford,
`R.H., Barlow, J.W., "Selective Laser Sintering of a Bronze Nickel Powder
`Mixture," Intelligent Manufacturing Systems International Conference On Rapid
`Product Development, Stuttgart, Germany, January 31, 1994
`18. Agarawala, M.K., Bourell, D.L., Beaman, J.J., Wu, B., Marcus, H.L.,
`"Structurally Sound Metal Parts by Selective Laser Sintering," The Mineral,
`Metals And Materials Society, Extraction & Processing Division Congress 1994
`Proceedings, Materials Processing III, Warren, PA, March 2, 1994
`19. Guduri, S., Crawford, R.H., Beaman, J.J., "Boundary Evaluation for Solid
`Freeform Fabrication," Proceedings Of The International Federation For
`Information Processing TC5 WG5.2/WG5.3 Conference, Litchfield Park, AZ,
`edited by M. J. Wozny and G. Olling, May 1994
`20. Harlan, N., Das, S., Bourell, D.L., Beaman, J.J., "Selective Laser Sintering of
`High Performance High Temperature Metals," Seventh Solid Freeform
`Fabrication Symposium, published by The University of Texas Mechanical
`Engineering Department, August 12, 1996
`21. Fuesting, T., Brown, L., Das, S., Harlan, N., Lee, G., Beaman, J.J., Bourell, D.,
`Sargent, K. , "Development of Direct SLS Processing for Production of Cermet
`Composite Turbine Sealing Components - Part II," Seventh Solid Freeform
`Fabrication Symposium, published by The University of Texas Mechanical
`Engineering Department, August 13, 1996
`22. Fuesting, T., Brown, L., Das, S., Harlan, N., Lee, G., Beaman, J.J., Bourell, D.,
`Sargent, K. , "Development of Direct SLS Processing for Production of Cermet
`Composite Turbine Sealing Components - Part I," Seventh Solid Freeform
`Fabrication Symposium, published by The University of Texas Mechanical
`Engineering Department, August 13, 1996
`23. Das, S., Beaman, J.J., Wohlert, M., Bourell, D.L., "Direct Selective Laser
`Sintering of High Performance Metals for Containerless HIP," Advances In
`Powder Metallurgy And Particulate Materials, Proceedings Of The International
`Conference On Powder Metallurgy And Particulate Materials, MPIF, Vol. 3 Part
`21, pp 67-78, 1997
`24. Bourell, D.L., Beaman, J.J., Barlow, J.W., Crawford, R.H., Marcus, H.L., Weiss,
`L.E., "Current and Future Trends in Solid Freeform Fabrication," Rapid Product
`Development Technologies, SPIE Proceedings, Vol. 2910, pp 104-113,
`1. 1997
`25. Das, S., Beaman, J.J., Wohlert, M., Bourell, D.L., "Direct Selective Laser
`Sintering of High Performance Metals for Containerless HIP," Symposium On
`Powder Metallurgy-Current Research And Industrial Practices, Indianapolis, IN,
`September 15-18, 1997
`26. Das, S., Beaman, J.J., Wohlert, M., Bourell, D.L., "Microstructure and
`Mechanical Properties of Metal Parts Produced by SLS/HIP," Symposium On
`Microstructure And Mechanical Properties Of Direct Fabricated Materials, The
`Metals, Minerals And Materials Annual Meeting, San Antonio, TX, February
`1998
`
`12
`
`

`

`
`
`
`
`27. Das, S., Fuesting, T.P., Danyo, G., Brown, L.E., Beaman, J.J., Bourell, D.L.,
`"Microstructure and Properties of Cermet Composite Abrasive Blade Tips
`Produced by Direct Laser Processing," Symposium On Microstructure And
`Mechanical Properties Of Direct Fabricated Materials, The Metals, Minerals And
`Materials Annual Meeting, San Antonio, TX, February 1998
`28. Das, S., Beaman, J.J., Wohlert, M., Bourell, D.L., "Direct Laser Freeform
`Fabrication of High Performance Metal Components," Proceedings Of The
`Seventh European Conference On Rapid Prototyping And