▪ Blood Filters, IV Filters
`▪ Laparoscopic Surgical Instruments
`▪ Umbilical Cord Blood Collection
`▪ Cell Therapy, Stem cells & bioreactors
`▪ Catheter Based Diagnostics
`▪ Therapeutic Catheters, angioplasty
`▪ Drug Delivery/ Infusion Devices
`▪ High Volume Sterile Disposables
`▪ Medical Device Regulatory Submissions
`▪ Grant Writing
`▪ Expert Witness
`
`
`
`
`
`CV for Richard P. Meyst
`
`
`
`
`Selected Expertise
`
` ▪
`
` Medical Product Design / Development
`▪ FDA-GMP Practices
`▪ Market / Patent Research
`▪ Rapid Prototyping
`▪ Tooling / Process Development
`▪ Manufacturing / Industrial Engineering
`▪ Project Planning / Management
`▪ Risk Analysis / Risk Management
`▪ Failure Analysis
`▪ Verification, Validation & Qualification
`▪ Regenerative Medicine Devices
`
`
`
`
`
`
`
`Biography
`
`Mr. Meyst is an accomplished engineer/program manager/entrepreneur and has been
`facilitating the advanced design and development of a wide range of successful medical
`technology products for the health care industry over the last 40+ years. He has extensive
`knowledge in product design and development, product prototyping, production startup,
`manufacturing engineering, risk analysis, strategic planning, grant preparation and market
`research. He has also provided expert witness assistance in IP cases, product failure analysis,
`and other medical products cases. He has held various engineering, development, operations
`and management positions at CR Bard, Fenwal Division of Baxter, IMED and other
`healthcare and consumer product companies. For the last 25+ years he has been an owner of
`Fallbrook Engineering. Since 2003 he has been the President and CEO. Selected product
`experience includes implantable vascular prosthesis, DNA amplifiers, vital signs monitoring,
`drug infusion pumps and systems, medical lasers, surgical instruments, catheters of all kinds,
`microprocessor based diagnostic and therapeutic instruments, blood cell collection and
`processing, filtration devices for blood and IV solutions, as well as stem-cell harvesting and
`cell expansion systems.
`
`Mr. Meyst was a Principal Investigator on an NIH SBIR grant from the National Heart, Lung
`and Blood Institute developing a device for the improved collection of Umbilical Cord Blood
`Stem Cells. He served on
`the Board of Directors for
`the Society of Plastics
`Engineers/Medical Plastics Division and is a long time member. He is a member of the
`American Association of Blood Banks, the Association for the Advancement of Medical
`Instrumentation and the American Filtration Society. He is also a member of the Medical
`Device Steering Committee of BIOCOM. Mr. Meyst has recently been a juror in the
`UBM/Cannon Medical Design Excellence Awards competition. His Bachelors and Masters
`degrees in Mechanical Engineering are from the University of Wisconsin, Madison. He has
`been awarded sixteen US Patents, has over four applications pending and has been an invited
`speaker, presenting talks at numerous scientific and medical industry meetings.
`
`CV of Richard P. Meyst
`
`
`
`
`
`Page 1 of 14
`
`
`
`
`
`November 2018
`
`BAXTER EXHIBIT 1004
`Page 1 of 14
`
`

`

`
`
`Employment History
`
`From:
`To:
`
`
`
`
`
`
`
`
`
`From:
`To:
`
`
`
`
`
`From:
`To:
`
`
`
`
`
`
`
`
`1989
`Fallbrook Engineering, Inc.
`Escondido, CA
`Present
`
`
`Position: 2003-Present: President/CEO
`
`Fallbrook provides consulting engineering services to client companies in
`the medical, pharmaceutical, biotech, electronic and consumer product
`industries. Services include project management, product conception,
`design and development, product prototyping, design and process
`validation, manufacturing engineering, production startup, cost reduction,
`as well as regulatory affairs compliance and submissions. He was also a
`Principal Investigator on a Phase II NIH SBIR Grant for the development
`of an improved method for the collection of umbilical cord blood, a source
`rich in stem cells.
`
`1989-2003: Vice President
`Provided consulting engineering services to client companies in the
`medical, pharmaceutical, cosmetic, electronic and consumer product
`industries.
`
`
`
`
`
`1988
`Diatek Corp.
`San Diego, CA
`1989
`
`
`Position: Manager, Manufacturing Engineering
`
`Designed/developed disposable for "next generation" tympanic electronic
`hospital thermometer. Designed and implemented high speed automated
`production equipment to produce 1 MM+ units per day. Supported existing
`vital signs and operating room product lines. Managed facility and plant
`maintenance departments.
`
`1983
`Imed Corp.
`San Diego, CA
`1988
`
`
`Position: Manager, Pilot Engineering
`
`Ran pilot production facility for new product builds of complex medical
`electromechanical/electronics and sterile disposables. Managed "Specials"
`program to offer custom I.V. sets and I.V. pumps per hospital order.
`Managed team of technicians/engineers to move new products from R&D
`into Manufacturing.
`
`Technical Product Manager
`Managed I.V. disposables product line projects that resulted in $4 MM
`annual savings. Developed organized plan, gained corporate support and
`supervised implementation. Achieved project objectives through design
`standardization, process simplification, quality/performance enhancements,
`plus multi-national manufacturing operations.
`
`
`
`
`
`CV of Richard P. Meyst
`
`
`
`
`
`Page 2 of 14
`
`
`
`
`
`November 2018
`
`BAXTER EXHIBIT 1004
`Page 2 of 14
`
`

`

`
`
`
`
`
`
`
`
`
`
`
`Manager, Disposable Design
`Managed/directed design & implementation of 6 new I.V. disposable
`product codes, an enteral product line and numerous new components.
`Supported research of 3rd generation volumetric pump disposable.
`Supervised department's growth in handling design/drafting, engineering
`and technician support.
`
`
`From:
`To:
`
`
`
`
`
`
`
`
`
`From:
`To:
`
`
`
`
`
`
`
`
`
`
`1979
`Oak Industries
`San Diego, CA
`1983
`
`
`Position: Manager of Telecommunications
`
`Consulted to headquarters and domestic operating companies. Managed
`$500K annual acquisition and installation of telecom equipment/services.
`Utilized cost control programs, network optimization and the use of value-
`added services to save $350K annually.
`
`Manager, Training & System Development
`Planned and directed implementation of facilities projects for nationwide
`Pay TV network offices/warehouses in Phoenix, Chicago and Dallas.
`Designed and supervised training programs for installers, service
`technicians, phone sales and billing agents. Improved overall efficiency by
`40% and saved 20% labor cost. Planned/directed the buying and
`installation of telecom equipment/services serving 600+ users handling
`20,000 calls per day.
`
`
`
`
`
`1974
`Baxter Travenol Labs, Fenwal Division
`Round Lake, IL
`1979
`
`
`Position: Program Manager
`
`Supervised and directed experts in design/development of collection,
`fractionation, storage and administration of human blood component
`products. Product scope: sterile medical disposables and electronic,
`electro-mechanical biomedical hardware. Specific products: Membrane
`Plasmapheresis, Autologous Blood Collection and General Blood
`Collection & Administration Sets.
`
`Section Manager
`Directed 6 engineers, physiologists and technicians in R&D for entire
`blood filtration product line. Simplified several blood set codes with 30%
`increase in manufacturing yield. Pioneered blood set materials evaluation
`for conversion from ETO to Gamma Sterilization. Designed nonwoven
`composite filter cartridge for Cadiotomy Bypass Filter. First of code
`production achievements: Polyester Mesh Blood Administration Sets,
`Pediatric Microfilter and a Filtration Leukapheresis Disposable Circuit.
`
`
`
`
`
`
`
`
`CV of Richard P. Meyst
`
`
`
`
`
`Page 3 of 14
`
`
`
`
`
`November 2018
`
`BAXTER EXHIBIT 1004
`Page 3 of 14
`
`

`

`
`
`
`
`
`
`
`
`
`
`From:
`To:
`
`
`
`
`
`
`
`
`
`
`
`
`
`Senior Biomedical Engineer
`Designed/tested and produced a Microaggregate Transfusion Filter product
`line for worldwide distribution. (Product performance remained tops
`through 20+ years of product life. Product is now discontinued.) Served
`on AAMI Microfilter Standards Committee. Redesigned Platelet
`Administration Set to improve yield 20%. Managed design of an
`Autologous Blood Collection Set. Developed filter for collecting
`cryoprecipitate to produce Factor VIII.
`
`Senior Development Engineer
`Reduced Blood Sets' field complaints by 50% through product redesign
`and manufacturing process modifications. Redesigned existing microfilter
`to double volume capacity with no cost increase. Introduced ultrasonic
`assembly techniques for several products to reduce costs and improve
`reliability.
`
`1972
`USCI, Division of C.R. Bard, Inc.
`Glens Falls, NY
`1974
`
`
`Position: Product Engineer, Prosthetic Development
`
`Supported Vascular Graft and Cardiovascular Catheter product lines.
`Instituted program to quantify and control variables affecting product
`quality. Designed/implemented/evaluated specialty test equipment and
`testing procedures. Developed/wrote product specifications.
`
`CV of Richard P. Meyst
`
`
`
`
`
`Page 4 of 14
`
`
`
`
`
`November 2018
`
`BAXTER EXHIBIT 1004
`Page 4 of 14
`
`

`

`
`
`Expert Witness, Litigation Experience
`
`
`
`
`
`
`Date
`2018
`Client: Akin Gump
`
`Case:
`Aptar v. 3M & Meck
`
`Project:
`Patent Infringement
`
`
`
`
`
`
`Date
`2017
`Client: The Crites Law Firm
`
`Case:
`Christina Morris
`
`Project:
`Personal Injury
`
`
`
`
`
`
`Date
`2017
`Client: Better Life Technologies
`
`Case:
`BLT v. Kaiser Permanente
`
`Project:
`Nondisclosure & Trade Secrets
`
`
`
`
`
`
`Date
`2017
`Client: Klinck Law
`
`Case:
`Blendermann v. LifeWave Inc.
`
`Project:
`Patent Infringement
`
`
`
`
`
`
`Date
`2017
`Client: Finnegan, Henderson, Farabow, Garrett &
`Dunner, LLP
`Zimmer Surgical v. Stryker Corp.
`Patent Infringement
`
`
`Client: Perkins Coie, LLP
`Fontem Ventures B.V. et al. v. R.J. Reynolds Vapor Co.
`Litigation and related IPRs
`
`
`Client: Greenberg Traurig, LLP
`B. Braun v. BD
`Patent infringement & IPRs
`
`
`Client: Perkins Coie, LLP
`Fontem Ventures B.V. et al. v. Nu Mark LLC
`Litigation and related IPRs
`
`
`
`
`Case:
`Project
`
`
`2016
`Case:
`Project:
`
`
`2016
`Case
`Project:
`
`
`2016
`Case:
`Project:
`
`
`
`
`
`
`
`
`Date:
`
`
`
`
`Date
`
`
`
`
`Date:
`
`
`
`
`
`
`CV of Richard P. Meyst
`
`
`
`
`
`Page 5 of 14
`
`
`
`
`
`November 2018
`
`BAXTER EXHIBIT 1004
`Page 5 of 14
`
`

`

`
`
`2016
`Case:
`Project:
`
`
`2016
`Case:
`Project:
`
`
`2016
`Case:
`Project:
`
`
`2016
`
`Case:
`Project:
`
`
`2016
`
`Client: Gallagher Krich, APC
`Cyth Systems v. CareFusion
`Contract dispute
`
`
`Client: Davis, Grass, Goldstein & Finlay
`Beatriz Picon v. San Antonio Regional Hospital
`Failure analysis
`
`
`Client: Cooley LLP
`Medline Industries, Inc. v. C.R. Bard, Inc.
`Patent dispute
`
`
`Client: Hodgson Russ LLP
`
`Curlin Medical, Inc. v. ACTA Medical, Inc.
`Patent infringement
`
`
`Client: PJ West and Associates, Inc.
`
`Undisclosed
`Case:
`Project: Medical product failure
`
`
`
`
`2016
`Client: Girardi and Keese
`
`Deirdree Lagewaard v. Medtronic Minimed, Inc.
`Case:
`Project: Medical product failure analysis
`
`
`
`
`2015
`Client: Perkins Coie LLP
`
`Case:
`Project:
`
`
`2014
`Case:
`
`Project:
`
`
`2014
`Case:
`Project:
`
`
`Fontem Ventures B.V. et al. v. NJOY Inc. et al.
`Electronic Cigarette IP case: Infringement, Validity and IPRs
`
`
`Client: Novak Druce Connolly Bove & Quigg LLP
`Larry G. Junker, Plaintiff v. Medical Components, Inc. and Martech
`Medical Products, Inc., Defendants
`Catheter design patent
`
`
`Client: Lipeles Law Group
`Robinson v Rheingold
`Analysis of failed knee brace
`
`
`Date:
`
`
`
`
`Date:
`
`
`
`
`Date:
`
`
`
`
`Date:
`
`
`
`
`
`Date:
`
`
`
`
`
`Date:
`
`
`
`
`
`Date:
`
`
`
`
`
`Date:
`
`
`
`
`
`Date:
`
`
`
`
`CV of Richard P. Meyst
`
`
`
`
`
`Page 6 of 14
`
`
`
`
`
`November 2018
`
`BAXTER EXHIBIT 1004
`Page 6 of 14
`
`

`

`
`
`
`Client: Law Offices of George B. Piggott
`Armand Maaskamp v. Theodore Wortrich
`Technology Ownership and Contracts Dispute
`
`
`Client: Knobbe Martens Olson & Bear LLP
`
`Masimo Corporation & Masimo International Sarl v. Shenzhen Mindray
`Bio-Medical Electronics., Ltd.
`I.P. – Patent Infringement and Validity
`
`
`Client: Johnson Moore
`Rosenwein v. UCLA Hospital, Bard Access Systems, Inc.
`Patient Injury, Root Cause Investigation of Medical Device
`
`
`Client: Orrick, Herrington & Sutcliffe LLP
`Flextronics v. ICU Medical
`Development Project Arbitration Matter
`
`
`Client: Leavitt, Yamane & Soldner
`Pre-case Evaluation
`Patient Injury, Root Cause Investigation of Medical Device
`
`
`Client: Weiss & Moy PC
`
`Pacific Bioscience Labs Inc. v. Nutra Luxe MD, LLC
`Jeff Weiss, Atty.
`I.P. – Patent Infringement
`Tested and analyzed product, wrote expert reports, gave Deposition and
`Testimony
`
`
`Client: Thomas Whitelaw
`
`
`Date:
`
`
`
`
`Date:
`
`
`
`
`
`
`Date:
`
`
`
`
`Date:
`
`
`
`
`Date:
`
`
`
`
`Date:
`
`
`
`
`
`
`
`2014
`Case:
`Project:
`
`
`2014
`
`Case:
`
`Project:
`
`
`2014
`Case:
`Project:
`
`
`2014
`Case:
`Project:
`
`
`2014
`Case:
`Project:
`
`
`2012
`
`Case:
`Contact:
`Project:
`
`
`
`
`Date:
`
`
`
`2012
`
`
`
`
`
`
`
`
`
`Case:
`Contact:
`Project:
`
`
`
`
`
`Pabban Development, Inc. vs. Kyphon Sarl and Medtronic, Inc.
`James Whitelaw, Atty.
`Contract Dispute
`Wrote expert reports, gave Deposition and Testimony in court.
`
`
`
`
`CV of Richard P. Meyst
`
`
`
`
`
`Page 7 of 14
`
`
`
`
`
`November 2018
`
`BAXTER EXHIBIT 1004
`Page 7 of 14
`
`

`

`
`
`2012
`Case:
`Contact:
`Project:
`
`
`2011
`Case:
`
`Contact:
`Project:
`
`
`
`2011
`Case:
`Contact:
`Project:
`
`
`
`
`2011
`
`Client: Gwilliam Ivary Chiosso Cavalli & Brewer
`Diane Ely vs. Barrx Medical, Inc. et al
`Steve Brewer, Atty.
`Patient Injury, Root Cause Investigation of Medical Device
`
`
`Client: DLA Piper
`Carefusion 303, Inc., Plaintiff-Counterclaim Defendant, v. Sigma
`International, Defendant-Counterclaimant.
`John Kinton, Atty.
`I.P. – Patent Infringement – Medical Fluid Delivery Device
`Analyzed defendants product, conducted engineering analysis, reviewed
`patent claims
`
`Client: Peach & Weathers
`Judy Franklin, Michael Franklin v. Ladies Workout, Omron
`Tim Peach, Atty.
`Personal Injury – Product Liability – Body Fat Analyzer
`Performed research and conducted testing on a body fat analyzer,
`prepared declaration
`
`
`
`Client: Beeler, Walsh and Walsh
`
`Walker v. Southwest Imaging
`Case:
`Contact: Micky Walsh, Atty.
`Project:
`Personal Injury – Product Liability
`
`Performed research, conducted testing on insulin pump, prepared report
`
`
`2011
`Case:
`Contact:
`Project:
`
`
`
`
`Client: Perkins Coie
`Currently Confidential
`Joseph Hamilton, Atty.
`I. P. Patent Infringement - unnamed device
`Performed testing/evaluation/analysis of competitive devices, prepared
`report
`
`
`
`
`
`2010
`Client: Thon Beck Vanni Callahan & Powell
`Jackson v. Ossur
`Case:
`Contact: Daniel P. Powell, Atty.
`Project:
`Personal Injury - Product Liability - Cold Therapy System
`
`Performed research of: FDA requirements for labeling, misbranding,
`Maude database for similar products and did evaluation of product
`labeling and directions for use, gave Deposition
`
`
`
`
`Date:
`
`
`
`
`
`Date:
`
`
`
`
`
`
`
`Date:
`
`
`
`
`
`
`
`Date:
`
`
`
`
`
`
`
`Date:
`
`
`
`
`
`
`
`Date:
`
`
`
`
`
`
`
`CV of Richard P. Meyst
`
`
`
`
`
`Page 8 of 14
`
`
`
`
`
`November 2018
`
`BAXTER EXHIBIT 1004
`Page 8 of 14
`
`

`

`
`
`
`Date:
`
`
`
`
`
`
`
`Date:
`
`
`
`
`
`Date:
`
`
`
`
`
`
`
`
`Date:
`
`
`
`
`
`
`
`
`
`Date:
`
`
`
`
`
`
`Date:
`
`
`
`2010
`Case:
`Contact:
`Project:
`
`
`
`
`2009
`Case:
`Contact:
`Project:
`
`
`2008
`Case:
`
`
`
`2008
`
`Case:
`
`
`Client: Schuering Zimmerman & Doyle, LLP
`Fonti v. Wilmarth
`J. Hawken Flanagan, Atty.
`Personal Injury – Product Liability – Electrosurgical Device
`Performed background research provided expert review and did product
`testing and evaluation
`
`
`Client: San Diego IP Law Group
`I-Flow, Inc. v. Apex Medical Technologies
`Trevor Coddington, Ph.D., Atty.
`I.P. – Patent Infringement – Medical Fluid Delivery Device
`Prepared Declaration, gave Deposition and Testimony
`
`Client: Weston Herzog LLP Attorneys
`Staley v. Ukiah Valley Medical Center, Adventist Health, Allen Medical
`Systems, Inc., et. al.
`Contact: William Weston, Atty.
`Project:
`Personal Injury - Product Liability - Operating room table accessory
`
`Performed test and evaluation of product function and failure modes,
`prepared Expert Report, Declaration, gave Deposition and Testimony
`
`
`Client: McKool Smith
`Medtronic Vascular, Inc., Medtronic USA, Inc., v. Boston Scientific Corp.
`Scimed Life Systems Inc., and Boston Scientific Scimed, Inc.
`Joshua Budwin, Atty.
`I.P. – Patent Infringement - Angioplasty balloon/stent catheter
`Developed test methods, tested product, analyzed data and prepared
`reports
`
`
`Client: The Law Offices of Morris & Player
`Pre-case evaluation
`Lea A. Player, Atty.
`Personal Injury - Implantable drug infusion port
`Product research, background information gathering
`
`
`Client: Holman Law
`Joseph Falagan v. Valley Medical Center, also known as Public Hospital
`District No. 1 of King County, a municipal corporation; Valley Medical
`Center Clinic; Kim B. Wright M.D. and Jane Doe Wright, M.D., his wife;
`Seattle Systems, Inc.; Camp, Inc.; United States Manufacturing Co.;
`Trulife Healthcare, a.k.a. Trulife Group
`
`Contact:
`Project:
`
`
`
`
`2007
`Case:
`Contact:
`Project:
`
`
`
`2007
`Case:
`
`CV of Richard P. Meyst
`
`
`
`
`
`Page 9 of 14
`
`
`
`
`
`November 2018
`
`BAXTER EXHIBIT 1004
`Page 9 of 14
`
`

`

`
`
`
`
`
`
`
`Date:
`
`
`
`
`
`Date:
`
`
`
`
`
`
`
`Date:
`
`
`
`
`
`
`
`Date:
`
`
`
`
`
`
`
`Date:
`
`
`
`
`
`
`Date:
`
`
`
`
`James Holman, Atty.
`Contact:
`Personal Injury - Neck brace
`Project:
`Provided expert review, analysis, Risk Analysis, prepared Declaration
`
`
`
`
`
`Client: Giovanniello & Michels LLP
`2007
`Russ Whitmeyer v. Invacare Corporation, Apria Healthcare, Inc.
`Case:
`Contact: Helen S. Peltekci, Atty.
`Project:
`Personal Injury - Oxygen concentrator
`
`Provided expert testing overview for Apria Healthcare
`
`
`2006
`Client: Perkins Coie LLP
`Case:
`Venetec International, Inc. v. Medical Device Group
`Contact:
`Joseph Hamilton, Atty.
`Project:
`I. P. Patent Infringement - Foley catheter securement device
`
`Performed patent analysis, claim construction, prepared Expert
`Declaration & Rebuttal Report, gave Deposition
`
`
`
`
`Client: Sanders Simpson Fletcher & Smith L.C.
`2006
`Ayers v. Lafayette Regional Health Center
`Case:
`Contact: Walter Simpson, Atty.
`Project:
`Personal injury - central venous catheter
`
`Performed consulting research, Product Failure Analysis, Expert Report
`preparation and gave Deposition
`
`
`Client: Spencer Fane Britt & Browne LLP
`NOXID Limited Company, et al. v. Mallinckrodt Inc., et al.
`Eric Solverud, Atty.
`Contract compliance for best efforts in product development - Solution
`Warmer
`Did product research, prepared Expert Report, gave Deposition
`
`
`
`
`
`2006
`Client: Mead & Mead
`Rohde v. Smiths Medical, et. al.
`Case:
`Contact: Katherine Mead, Atty.
`Project:
`Personal Injury - Central line port
`
`Performed consulting research on product failure
`
`
`
`
`2005
`Client: Knobbe Martens Olson & Bear LLP
`Case:
`Applied Medical v. Synthion
`Contact:
`Joe Jennings, Atty.
`Project:
`I.P. – Patent Issues- Ligating clip applier
`
`
`
`2006
`Case:
`Contact:
`Project:
`
`CV of Richard P. Meyst
`
`
`
`
`
`Page 10 of 14
`
`
`
`
`
`November 2018
`
`BAXTER EXHIBIT 1004
`Page 10 of 14
`
`

`

`
`
`
`
`
`Date:
`
`
`
`
`
`
`
`Date:
`
`
`
`
`
`
`
`
`Date:
`
`
`
`
`
`
`
`Date:
`
`
`
`
`
`
`Date:
`
`
`
`
`
`
`Date:
`
`
`
`
`
`
`
`
`
`2005
`Case:
`Contact:
`Project:
`
`
`
`
`2003
`
`Expert Report preparation, gave Deposition
`
`
`Client: Luvera Law Firm
`Singh v. Providence Health & Edwards Lifesciences
`Joel Cunningham, Atty.
`Personal Injury- Thermal dilution catheter for cardiac output
`Performed research & review of documentation, participated in Failure
`Analysis, prepared Declaration
`
`
`Client: Tuverson & Hillyard
`
`Case:
`
`Luzmilla v. Richard Allen Medical, Imagyn Medical Technology &
`Conmed Corp.
`Contact: Mario Iorillo, Atty.
`Project:
`Personal Injury- Laparoscopic dissector/clip applier
`
`Performed consulting research, gave Deposition and Testimony
`
`
`
`
`2002
`Client: Payne & Fears
`
`Pelagalli v. Premier Laser & Collette Cozan
`Case
`Contact: Mark Butler, Atty.
`Project:
`I.P. Ownership issues – Laser for dental applications
`
`Provided research, prepared Expert Report & Rebuttal Report
`
`
`
`
`2001
`Client: Leydig Voit & Mayer, Ltd.
`Case:
`Pall Corporation v. Hemasure
`Contact: Mark Phelps, Atty.
`Project:
`I.P. – Patent Issues – Leukodepletion blood filter
`
`Research, claim construction, prepared Expert Report, gave Declaration
`
`
`
`
`1999
`Client: Sanford Ehrmann, Esq.
`Case:
`Cohen v. Abbott
`Contact:
`Sanford Ehrmann, Atty.
`Project:
`“Personal” Injury - Over-the-needle IV catheter
`
`Failure Analysis, Expert Report, catheter in race horse
`
`
`
`
`1997
`Client: Jaman, Kahn & Associates
`Case:
`Auzenne v. Park Davis
`Contact: Cori Steinberg, Atty.
`Project:
`Personal Injury - Glass drug ampule
`
`Product research, performed Risk Analysis, gave Deposition
`
`
`CV of Richard P. Meyst
`
`
`
`
`
`Page 11 of 14
`
`
`
`
`
`November 2018
`
`BAXTER EXHIBIT 1004
`Page 11 of 14
`
`

`

`
`
`
`
`Patents
`
`Patent Number Date Issued Title
`
`8,522,839
`
`8,033,306
`
`7,784,504
`
`6,669,092
`
`6,440,110
`
`6,190,368
`
`5,993,429
`
`5,919,176
`
`RE34,599
`
`D336,862
`
`5,056,682
`
`4,911,559
`
`4,736,736
`
`4,283,289
`
`4,170,056
`
`4,157,967
`
`
`
`2013
`
`2011
`
`2010
`
`2003
`
`2002
`
`2001
`
`2001
`
`2001
`
`1994
`
`1993
`
`1991
`
`1990
`
`1988
`
`1981
`
`1979
`
`1979
`
`Adapters for use with an anesthetic vaporizer
`
`Adapters for use with an anesthetic vaporizer
`
`Adapters for use with an anesthetic vaporizer
`
`Display apparatus
`
`Apparatus and method for collecting blood from an umbilical cord
`
`Apparatus and method for collecting blood from an umbilical cord
`
`Apparatus and method for collecting blood from an umbilical cord
`
`Apparatus and method for collecting blood from an umbilical cord
`
`Disposable probe cover assembly for medical thermometer
`
`Probe cover holder for medical thermometer
`
`Container for fan-folded sheets
`
`Disposable probe cover assembly for medical thermometer.
`
`Cervical traction assembly having head cradle w/ occipital shelf
`
`Blood filter for leukocytes
`
`Blood filter
`
`Blood filter
`
`
`
`CV of Richard P. Meyst
`
`
`
`
`
`Page 12 of 14
`
`
`
`
`
`November 2018
`
`BAXTER EXHIBIT 1004
`Page 12 of 14
`
`

`

`
`
`Education
`
`Year
`1972
`1971
`
`Publications / Presentations
`
`
`College/University
`University of Wisconsin, Madison, WI
`University of Wisconsin, Madison, WI
`
`Degree
`MS, Mechanical Engineering
`BS, Mechanical Engineering
`
`1. “Effective Strategic Alliances”, Tech Coast Life Science Innovation Conference,
`September 28, 1999
`
`2. “Effective Strategic Alliance Tactics”, Tech Coast Life Science Innovation
`Conference, September 28, 2000, Irvine, CA.
`
`3. “Strategies for Optimal Outsourcing Alliances”, MD&M West 2001, January 9, 2001,
`Anaheim, CA.
`
`4. “Winning Strategies for Commercialization”, Tech Coast Life Science Innovation
`Conference, November 13, 2001, Irvine, CA.
`
`5. “Seeing Green: Finding Money for Product Development” A Presentation for the
`2002 Medical Design & Manufacturing Conference, Jan., 2002, Anaheim, CA.
`
`6. “Running the Hurdles with NIH SBIR’s” A Presentation for the 4th Annual NIH
`SBIR/STTR Conference, June 21, 2002, Bethesda, MD
`
`7. “Running the Hurdles with NIH SBIR’s”, A Presentation for the 5th Annual Winter
`Conference, Association of University Research Parks, January 17, 2003, Newport
`Beach, CA
`
`8. “NIH Grant $ for Your Med Device/Biotechnology Project”, Medcon, Conference for
`the Design and Manufacturing of Medical and Biotech Devices, April 28, 2004, Del
`Mar, CA
`
`9. “NIH Grant $ for your Nano-Biotechnology Project”, A Presentation for the
`nanoSIG™ Forum, Commercial Applications in Nano-Bio Technology, February 26,
`2004, San Diego, CA
`
`10. “It’s a risky world out there. Using Risk Management as a tool to ensure success in
`medical product design and development.” A Presentation to the 2005 AOAC Two-
`Day cGMP Conference on Pharmaceuticals and Medical Devices, March 10 & 11,
`2005, FDA Offices, Irvine, CA
`
`11. “It’s a risky world out there. Using Risk Management as a tool to ensure success in
`medical product design and development.” A presentation for Medcon Expo
`April 28, 2005, Del Mar Fairgrounds, San Diego, CA
`
`12. “Development of a new medical device for the efficient, safe and easy collection of
`umbilical cord blood.” A presentation at the BIOCOM Medical Device Quarterly
`Event, August 11, 2005, San Diego, CA
`
`13. “Risk Assessment: It’s a Risky World out There” A presentation to the San Diego
`Regulatory Affairs Network, March 16, 2006, San Diego, CA
`
`CV of Richard P. Meyst
`
`
`
`
`
`Page 13 of 14
`
`
`
`
`
`November 2018
`
`BAXTER EXHIBIT 1004
`Page 13 of 14
`
`

`

`
`
`14. “Device & Diagnostic Development: Concept to Bedside” Panel member at the
`BIOCOM Medical Device Quarterly Event, October 22, 2008, San Diego, CA
`
`15. “Risk Assessment: It’s a Risky World out There” A presentation to a Masters Class at
`San Diego State University, April 2011, San Diego, CA
`
`16. “Risk Assessment: It’s a Risky World out There” A presentation to a Masters Class at the
`University of California, San Diego, August 2011, San Diego, CA
`
`17. “Bioresorbable Polymers with Medical Devices – A (Still) Emerging Field” A
`presentation to the Medical Device and Design West Conference, February 13, 2012,
`Anaheim, CA
`
`18. “Cellect 250™, The Safest, Fastest and Most Effective Umbilical Cord Blood Collection
`System” A presentation to National Heart, Lung, and Blood Institute Innovation
`Conference, June 11, 2013, San Diego, CA
`
`19. "Secrets to a Successful Startup" a panel member at 30th anniversary MD&M West
`Conferences, February 11, 2015 in Anaheim, CA
`
`
`Professional Associations and Additional Activities
`
` Sr. Member, Society of Plastics Engineers (SPE), Medical Plastic Division
`
` ▪
`
`▪ Member, AAMI, Association for the Advancement of Medical Instrumentation
`
`▪ Member, AABB, American Association of Blood Banks
`
`▪ Member, AACC, American Association for Clinical Chemistry
`
`▪ Member, American Filtration and Separations Society
`
`▪ Member, BIOCOM, San Diego
`
`▪ Member, The Designers Accord
`
`▪ Member, SDRAN, San Diego Regulatory Affairs Network
`
` Served as a juror in the UBM/Cannon Medical Design Excellence Awards competition
`
` ▪
`
`▪ Served as a judge in a San Diego CONNECT Capital Competition for start-ups
`
`▪ Advisor to Valley Center High School Computer Aided Design (CAD) program
`
`
`
`
`
`CV of Richard P. Meyst
`
`
`
`
`
`Page 14 of 14
`
`
`
`
`
`November 2018
`
`BAXTER EXHIBIT 1004
`Page 14 of 14
`
`