Curriculum Vitae
`Dr. Jeffrey S. Vipperman
`Vice Chair, Department of Mechanical Engineering and Materials Science
`Professor of Mechanical Engineering
`Professor of BioEngineering
`Professor of Communication Science and Disorders
`Director and founder of the Sound, Systems, and Structures Laboratory
`University of Pittsburgh
`Department of Mechanical Engineering & Materials Science
`636 Benedum Hall
`Pittsburgh, PA 15261
`jsv@pitt.edu
`Last Revised May 25, 2021
`
`
`
`
`Education:
`
`04/1997
`
`Ph.D., Mechanical Engineering
`
`Duke University
`
`06/1992
`
`M.S., Mechanical Engineering
`
`Virginia Tech
`
`08/1990
`
`B.S., Mechanical Engineering
`
`Virginia Tech
`
`
`
`
`
`
`
`
`Professional Experience:
`
`2021-
`present
`
`2021-
`present
`
`2018-
`present
`
`2017-
`present
`
`Professor of Communication Sciences and Disorders, University of Pittsburgh, Pittsburgh, PA
`
`
`
`President of Atlas Medtech, LLC
`
`
`
`Vice President of Atlas Medtech, LLC
`
`Sole proprietor, Blue Ridge Consulting, LLC
`
`1/16-present Vice Chair of Mechanical Engineering and Materials Science, University of Pittsburgh,
`Pittsburgh, PA
`
`6/14-present Professor of Mechanical Engineering, University of Pittsburgh, Pittsburgh, PA
`
`6/14-Present Professor of BioEngineering, University of Pittsburgh, Pittsburgh, PA
`
`1/08-8/11
`
`Graduate Director (Mechanical Engineering), University of Pittsburgh, Pittsburgh, PA
`
`4/05-6/14
`
`Associate Professor of Mechanical Engineering, University of Pittsburgh, Pittsburgh, PA
`
`4/05-6/14
`
`Associate Professor of BioEngineering, University of Pittsburgh, Pittsburgh, PA
`
`1/99-4/05
`
`Assistant Professor of Mechanical Engineering, University of Pittsburgh, Pittsburgh, PA
`
`6/00-6/02
`
`Mechanical Engineer, NIOSH, Pittsburgh Research Laboratory
`
`9/97-12/98
`
`Assistant Professor, University of Maine, Orono, ME
`
`2/97-8/97
`
`Assistant Research Professor, Duke University, Durham, NC
`
`8/93-2/97
`
`Research Assistant, Duke University, Durham, NC
`
`8/93-2/97
`
`Systems Administrator, Duke University, Durham, NC
`
`1993-1997
`
`Vice President and Senior Research Scientist, Adaptive Technologies, Inc. Blacksburg, VA
`
`7/92-7/93
`
`Research Associate, Virginia Polytechnic Institute and State University, Blacksburg, VA
`
`
`
`Page 1 of 25
`
`GOOGLE EXHIBIT 1007
`
`

`

`Vipperman, Jeffrey S. Page
`
`
`2/25
`
`8/90-6/92
`
`Graduate Project Assistant, Virginia Polytechnic Institute and State University, Blacksburg, VA
`
`1/90-8/90
`
`Undergraduate Researcher, Virginia Polytechnic Institute and State University and Bristol
`Compressors, Blacksburg, VA
`
`5/89-8/90
`
`Development Engineering Assistant, Ingersoll-Rand Corporation, Roanoke, VA
`
`
`
`
`Leadership Highlights, Present and Past:
`
`
`•
`
`• Vice Chair of Mechanical Engineering and Materials Science Department (current). Advise
`Chair on issues regarding Mechanical Engineering curriculum, research, and hiring; oversee
`purchase and installation of major instrumentation and infrastructure for research and teaching;
`oversee departmental safety and academic integrity. Attend meetings with University leadership
`on behalf of the Chair when absent.
`• President of Atlas Medtech LLC (current). Atlas Medtech is a University of Pittsburgh startup
`company commercializing a rapidly deployable surgical retractor developed in Dr. Vipperman’s
`lab.
`• Founding Chair of the University of Pittsburgh Swanson School of Engineering Academic
`Integrity Committee (current). Developed school-wide academic integrity policy in accordance
`with university guidelines. Chair bimonthly meetings of the Academic Integrity Committee, which
`has representation from every Swanson School of Engineering department and student leaders.
`Developed outreach materials and give presentations to large groups of faculty, graduate, and
`undergraduate students. Oversee the development of educational and outreach materials related
`to academic integrity intended to build and enhance a culture of integrity within the school.
`Inaugural (faculty) Cochair of Department of Mechanical Engineering and Materials Science
`Students Advisory Board. Oversaw the establishment of the Student Advisory Board in response
`to intense national political and social unrest in order to best support our student population (the
`committee of faculty, undergraduate and graduate students represents a broad cross section of
`background, race, gender identities, sexual orientations); In addition to chairing monthly
`meetings, oversaw the development of a mission statement, student climate survey, outreach
`materials and activities, and development of diversity, equity, and inclusion modules for courses.
`• Graduate Director, Department of Mechanical Engineering and Materials Science. Responsible
`for 120 MS and 45 PhD students; Oversaw 45% growth in PhD students and 40% growth in part-
`time MS program, including offering courses at a satellite campus; Oversaw the evaluation and
`selection of new graduate students, including departmental offers for aid; Evaluated the
`curriculum developed for the new MS in Nuclear Engineering program; Certified graduations
`and approved new courses; Oversaw the external 10-year review of the graduate program.
`• Chair of the Noise Control and Acoustics Division for the American Society of Mechanical
`Engineers. Conducted the business of the Division and chaired the annual technical planning and
`executive committee meetings; Interfaced the division with the national office of ASME; Sought
`nominations for the prestigious Rayleigh Lecturer for next year’s conference; attended ASME
`Leadership Development Training.
`• Technical Program Chair, American Society of Mechanical Engineers International Mechanical
`Engineering Conference and Exposition (ASME IMECE). Oversaw the review and publication
`of all (several dozen) acoustics and vibration related conference papers that were submitted
`through the Noise Control and Acoustics Division of ASME.
`• Associate Editor for ASME Journal of Vibration and Acoustics.
`• Chair of the Active Noise Control Technical Committee for the American Society of Mechanical
`Engineers. Oversaw the planning for multiple (3-5/yr) sessions in active noise control for the
`next year’s annual conference.
`
`
`
`Page 2 of 25
`
`

`

`Vipperman, Jeffrey S. Page
`
`
`3/25
`
`• Chair, Per Bruel Gold Medal in Acoustics award committee for American Society of Mechanical
`Engineers. Oversaw the nomination and selection process for ASME’s most prestigious annual
`award in acoustics while conducting the meetings of the committee.
`• Chair, ANSI S1.1 Acoustical Terminology standard working group for the Acoustical Society of
`America. Conducted several in-person meetings of the working group; collected input from the
`working group and Society members at large that was discussed at length and used to edit and
`revise the content of the S1.1 standard.
`• Chair of the Pittsburgh Section of American Society of Mechanical Engineers (1,500 members).
`Chaired the monthly Executive Committee meetings; interfaced with the ASME national office;
`the business of the Section, including a monthly newsletter and technical and outreach
`programming; routinely connected with members about items of potential interest; attended
`ASME Leadership Development Training.
`• Program and Education Chairs for Pittsburgh Section of American Society of Mechanical
`Engineers. Developed monthly programs on a variety of topics for our members, which included
`at least one course for continuing education credits per year, and an annual student/professional
`mixer.
`
`
`Consulting:
`
`2020-21
`
`Expert Witness for Google: Google v. Sonos, Finnegan Law Firm
`(IPR Proceedings)
`
`2020-21
`
`Expert Witness for Shure: Shure v. ClearOne, Finnegan Law Firm
`(PGR Proceedings)
`
`2019-2020
`
`Expert Witness for Shure: Shure v. ClearOne, Finnegan Law Firm
`(IPR Proceeding)
`
`2018
`
`2016
`
`Expert Witness for Covidien: Ethicon Endo-Surgery v. Covidien,
`DLA Piper Global Law Firm
`
`Expert Witness for Samsung: Suntegra v. Samsung, Convington and
`Burlington
`
`2016
`
`Mine Safety and Appliance
`
`2014-15
`
`2013-15
`
`Expert Witness for Invensys / DLA Piper Global Law Firm (Invensys
`v Emerson) (seven different IPR proceedings)
`
`Expert Witness for Apple Computer / Wilmer Cutler Pickering Hale
`and Dorr (WilmerHale) (THX v. Apple) (Two separate IPR
`proceedings)
`
`2013-14
`
`Expert Witness for Covidien / DLA Piper, Global Law Firm (Ethicon
`v. Covidien)
`
`2011-2012
`
`Technical Analysis and Services, International
`
`2011-2012 Mosebach Manufacturing, Inc.
`
`2011-2012 MIRATECH Corporation
`
`2008
`
`Siemens Government Services
`
`2007-2008
`
`Expert Witness: Thompson, Coburn and FagelHaber LLC
`
`2007-
`2008,11,12
`
`Westinghouse Electric Company
`
`2004
`
`National Institute of Occupational Safety and Health
`
`2003-2008
`
`BrashearLP
`
`
`
`Page 3 of 25
`
`

`

`Vipperman, Jeffrey S. Page
`
`
`4/25
`
`2001-2005
`
`H. H. Reich Engineers
`
`2000
`
`SigmaTech
`
`2000, 2001
`
`Psychology Software Tools
`
`1999
`
`1998
`
`1998
`
`1997
`
`1995
`
`1994
`
`NASA Langley Research Center
`
`Nikola Engineering
`
`Duke University
`
`Sandia National Laboratory
`
`BSG Laboratories
`
`Centrair Corporation
`
`
`Honors and Awards:
`
`
`
`
`2018
`
`2018
`
`Pitt Innovator Award
`
`Chancellors Innovation Commercialization Award
`
`2016, 2017
`
`Chancellor’s Early Stage Commercialization Fund award
`
`2014
`
`2014
`
`2011
`
`2011
`
`2007
`
`2006
`
`2005
`
`2003
`
`2001
`
`2000
`
`Association for Iron and Steel Rolls Technology Best Paper Award
`
`University of Pittsburgh Innovator Award
`
`Visiting Committee Educator Award, MEMS Department
`
`University of Pittsburgh Innovator Award
`
`Elected Fellow of ASME
`
`School of Engineering Beitle-Veltri Memorial Teaching Award
`
`Engineering Faculty Honor Roll
`
`Letter of commendation from the Chancellor of the University, for chairing
`ASME-Pittsburgh
`
`Who’s Who in Engineering, Pittsburgh Business Times
`
`Letter of commendation from the Vice Chancellor of Student Affairs for
`Positively Impacting Student
`
`1999-2001
`
`Leighton E. and Mary N. Orr Faculty Fellowship, Univ. of Pittsburgh,
`
`1992
`
`1991
`
`1989
`
`Paul Torgersen Research Excellence Award, Virginia Tech: Voted best Master
`of Science project for the year.
`
`Student Paper Award, Acoustical Society of America: Voted second best
`student paper in structural acoustics for the conference.
`
`Frank O’Bell Academic Scholarship
`
`
`Students Honors and Awards:
`
`
`Chris Dumm, 1st place PDMA Competition
`
`Chris Dumm, 2nd Place in Wells Competition
`
`2017
`
`2017
`
`
`
`Page 4 of 25
`
`

`

`Vipperman, Jeffrey S. Page
`
`
`5/25
`
`2016
`
`2016
`
`2014
`
`2009
`
`2007
`
`
`
`Tim Ryan, Carl Zeiss Student Scholarship, American Society of Precision
`Engineering
`
`Sr. Design team took 2nd Place in the SSOE Design Expo
`
`Konstantin Redkin, Association for Iron and Steel Rolls Technology Best
`Paper Award
`
`Brian Bucci, Best Research Assistant, MEMS Department
`
`Mentored the first team from Pitt to be selected for the NASA micro-gravity
`experiment (it flew on the “vomit comet” with our students).
`
`
`
`Published Journal Articles:
`1. Li, Qi, and J.S. Vipperman, “Three-Dimensional Pentamode Acoustic Metamaterials with
`Hexagonal Unit Cells,” J. Acoust. Soc. of Am. 145, 1372 (2019);
`https://doi.org/10.1121/1.5093622
`2. Li, Qi, and J.S. Vipperman, “Two-dimensional arbitrarily shaped acoustic cloaks with triangular
`patterns of homogeneous properties ASME. J. Vib. Acoust. 141(2):021014-021014-7.
`doi:10.1115/1.4041897, 2018.
`3. Li, Qi, and J.S. Vipperman, “Non-singular three-dimensional arbitrarily shaped acoustic cloaks
`composed of homogeneous parts,” AIP J. of Applied Physics, 124, 035103 (2018);
`https://doi.org/10.1063/1.5028136 , June 26, 2018
`4. Schimoler, P.J., J.S. Vipperman, M.C. Miller, “Pole/Zero Design of Agonist/Antagonist
`Actuation,” IEEE Transactions on Control Systems Technology, 26(6), pp. 2141-8, DOI:
`10.1109/TCST.2017.2740852, Nov. 2018.
`5. Li, Qi, and J.S. Vipperman, “Two-dimensional arbitrary shape acoustic cloaks composed of
`homogeneous parts,” AIP J. of Applied Physics, 122, 144902 (2017);
`https://doi.org/10.1063/1.4990758, Oct. 2017.
`6. M. Hua, Q. Wang, C. Li, JS Vipperman, AJ DeArdo, “Plastic Deformation Behavior of Weld
`Lines in ERW Steel Pipe,” Iron and Steel Technology, 13(10), pp. 144-151, 10/2016.
`7. Wang, Chenzhi, Jae Bum Pahk, Carey D. Balaban, Mark C. Miller, Adam R. Wood, Jeffrey S.
`Vipperman, “Computational Study of Human Head Response to Primary Blast Waves of Five
`Levels from Three Directions,” PLOS One, 10.1371/journal.pone.0113264,
`http://journals.plos.org/plosone/article?id=10.1371/journal.pone.0113264, 2014.
`8. Li, Qi, and J.S. Vipperman, “Two-dimensional acoustic cloaks of arbitrary shape with layered
`structure based on transformation acoustics,” AIP Applied Physics Letters, 105, 101906; doi:
`10.1063/1.4895765, 2014.
`9. K.V. Redkin, J.S.Vipperman, C.Hrizo (WHEMCO), R.Schleiden (United Rolls), C.I.Garcia,
`"Multi-scale Finite-Element Modeling and Microstructural Evaluation of Centrifugally Cast
`High-Speed Steel Finishing Rolls" (FEATURE article), Iron and Steel Technology (AISTech)
`Journal, Vol.10, No.10, pp.69-84, 2013
`10. Ryan, Timothy S. and Jeffrey S. Vipperman, “Incorporation of Scheduling and Adaptive
`Historical Data in the Sensor Utility Network Method for Occupancy Estimation,” Energy and
`Buildings, http://dx.doi.org/10.1016/j.enbuild.2013.01.037, Volume 61, June 2013, Pages 88–92.
`11. B. Bucci, J.S. Vipperman, D. Cole, S. Ludwick, “Evaluating a servo settling algorithm,”
`Precision Engineering, DOI: 10.1016/j.precisioneng.2012.04.006, 37(1), pp. 10-22, Jan 2013.
`12. Bucci, B., Cole, D., Ludwick, S., Vipperman, J.S., “A Nonlinear Control Algorithm for
`Reducing Settling Time in High-Precision Point to Point Motion,” IEEE Transactions on
`Control System Technology, Issue 99, 10.1109/TCST.2012.2206812, Sep. 11, 2012.
`13. Cvengros, B., D. Valente, E. Nykaza, J. Vipperman, “Blast Noise Classification With Common
`Sound Level Meter Metrics,” Journal of the Acoustical Society of America, 132(2), pp. 822-31,
`Aug 2012.
`
`
`
`Page 5 of 25
`
`

`

`Vipperman, Jeffrey S. Page
`
`
`6/25
`
`14. Zink, Florian, J.S. Vipperman, and LA Schaefer, “CFD Simulation of Thermoacoustic Cooling,”
`International Journal of Heat and Mass Transfer, 53(19-20), pp. 3940-6, Sep 2010.
`15. Zink, Florian, J.S. Vipperman, and LA Schaefer, “CFD Simulation of Thermoacoustic Engine
`With Coiled Resonator,” International Communications in Heat and Mass Transfer, 37(3), pp.
`226-9, Mar 2010.
`16. Zink, Florian, J.S. Vipperman, and LA Schaefer, “Environmental Motivation to Switch to
`Thermoacoustic Refrigeration,” Applied Thermal Engineering, 30(2-3), pp. 119-26, Feb 2010.
`17. Kuxhaus L, Schimoler PJ, Vipperman JS, Miller MC. “Validation of a Feedback-Controlled
`Elbow Simulator Design: Elbow Muscle Moment Arm Measurement”. ASME Journal of
`Medical Devices, 3(3), 7pp., Sep. 2009.
`18. Rizzo, P., G. Bordoni, A. Marzani, J. S. Vipperman, “Localization of sound sources by means of
`unidirectional microphones,” Measurement Science & Technology, 20(5), May 2009.
`19. El-Kurdi, Mohammed. S., Jeffrey S. Vipperman, and David A. Vorp, “Design and Subspace
`System Identification of an Ex vivo Vascular Perfusion System,” Journal of Biomedical
`Engineering, 131, 8pp., April 2009.
`20. Kuxhaus L, Schimoler PJ, Vipperman JS, Baratz ME, Miller MC. “Effects of Camera Switching
`on Fine Accuracy in a Motion Capture System.” ASME Journal of Biomechanical Engineering,
`131(1), 014502:1-6, Jan. 2009.
`21. El-Kurdi, Mohammed, J.S. Vipperman, D.A. Vorp, “Control of Circumferential Wall Stress and
`Luminal Shear Stress Within Intact Vascular Segments Perfused Ex Vivo,” J. of Biomech. Engr.,
`130(5), 7 pp., Oct. 2008.
`22. Li, D., L. Cheng, G. H. Yu, and J.S. Vipperman, “Noise control in enclosures: Modeling and
`experiments with T-shaped acoustic resonators,” Journal of the Acoustical Society of America,
`122(5), Nov. 2007.
`23. Brian A. Bucci, Jeffrey S. Vipperman, “Performance of Artificial Neural Network-Based
`Classifiers to Identify Military Impulse Noise,” Journal of the Acoustical Society of America.,
`122(3), pp. 1602-10, Sep. 2007.
`24. Vipperman, J.S., E.R. Bauer, D. R. Babich “Survey of Noise in Coal Preparation Plants,”
`Journal of the Acoustical Society of America, 121(1), pp. 206-12, Jan. 2007.
`25. J. Peter Hensel, Randall S. Gemmen, Brian J. Hetzer, Jimmy D. Thornton, Jeffrey S. Vipperman,
`William W. Clark, Brian A. Bucci, “Effects of Cell-to-Cell Fuel Mal-Distribution on Fuel Cell
`Performance,” Journal of Power Sources, 164(1), pp. 115-25, Jan. 10 2007.
`26. Li, Deyu and J. S. Vipperman, “Noise Control of Mock-Scale ChamberCore Payload Fairing
`Using Integrated Acoustic Resonators,” AIAA Journal of Spacecraft and Rockets, 43(4), July-
`Aug, 2006
`27. Bisnette, Jesse, Adam K. Smith, J. S. Vipperman, and D. B. Budny, “Active Noise Control Using
`Phase-Compensated, Damped Resonant Filters,” ASME Journal of Vibration and Acoustics
`128(2), pp. 148-55, April, 2006.
`28. Li, Deyu and J. S. Vipperman, “On The Noise Transmission and Control For a Cylindrical
`ChamberCore Composite Structure,” Journal of Sound and Vibration. 288(1-2), pp. 235-54,
`Nov. 2005.
`29. Haljasmaa, Igor V., J. S. Vipperman, Ronald J. Lynn, Robert P. Warzinski, “Control of a Fluid
`Particle Under Simulated Deep-Ocean Conditions in a High-Pressure Water Tunnel,” AIP
`Review of Scientific Instruments, 76(2), Feb. 2005, pp. 1-11.
`30. Li, Deyu and J. S. Vipperman, “Mathematical model for characterizing noise transmission into
`finite cylindrical structures,” Journal of the Acoustical Society of America, 117(2), Feb. 2005,
`pp. 679-89.
`31. Li, Deyu and J. S. Vipperman, “On the design of long T-shaped acoustic resonators,” Journal of
`the Acoustical Society of America, 116(5), Nov. 2004, pp. 2785-92.
`32. Vipperman, Jeffrey S., Deyu Li, Ilya Avdeev, and Steven Lane, “Investigation of the sound
`transmission into an advanced grid-stiffened structure,” ASME Journal of Vibration and
`Acoustics, 125(3), July 2003, pp. 257-66.
`
`
`
`Page 6 of 25
`
`

`

`Vipperman, Jeffrey S. Page
`
`
`7/25
`
`33. Vipperman, Jeffrey S., “Simultaneous Qualitative Health Monitoring and Sensoriactuation,”
`AIAA Journal, 39(9), September, 2001, pp. 1822-1825.
`34. Cabell, R. H., D. L. Palumbo, and J. S. Vipperman, “A Principal Component Feedforward
`Algorithm for Active Noise Control: Flight Test Results,” IEEE Transactions on Control
`Systems Technology, 9(1), January, 2001, pp. 76-83.
`35. Gibbs, G. P., R. L. Clark, D. E. Cox, J. S. Vipperman, “Radiation modal expansion: Application
`to active structural acoustic control,” Journal of the Acoustical Society of America, 107(1), Jan.
`2000. pp. 332-339.
`36. Cox, D. E., G. P. Gibbs, R. L. Clark, and J. S. Vipperman, “Experimental Robust Control of
`Structural Acoustic Radiation,” ASME Journal of Vibration and Acoustics, 121(4), Oct. 1999,
`pp. 433-440.
`37. Vipperman, J. S., R. L. Clark, “Implications of Using Colocated Strain-Based
`Transducers for Active Structural Acoustic Control,” Journal of the Acoustical Society of
`America, 106(3), Sep. 1999, pp. 1392-1400.
`38. Vipperman, J. S., J. M. Barker, R. L. Clark, G. J. Balas, “Comparison of - and H2-
`Synthesized Controllers on a Experimental Typical Section.,” Journal of Guidance,
`Control and Dynamics, 22(2), Mar-Apr 1999, pp.278-285.
`39. Vipperman, J. S., R. L. Clark, “Multivariable Feedback Active Structural Acoustic Control
`Using Adaptive Piezoelectric Sensoriactuators,” Journal of the Acoustical Society of America,
`105(1), Jan. 1999, pp. 219-225.
`40. Vipperman, J. S., R. L. Clark, Mark D. Conner, Earl H. Dowell, “Investigation of the
`Experimental Active Control of a Typical Section Airfoil Using a Trailing Edge Flap,”
`Journal of Aircraft, 35(2), Mar-Apr 1998, pp. 224-229.
`41. Vipperman, J. S., and R. L. Clark, “Hybrid Model-Insensitive Control Using a
`Piezoelectric Sensoriactuator,” Journal of Intelligent Material Systems and Structures,
`7(6), November 1996, pp. 689-695.
`42. Vipperman, J. S. and R. L. Clark, “Implementation of an Adaptive Piezoelectric
`Sensoriactuator,” AIAA Journal, 34(10), October 1996, pp. 2102-2109.
`43. Vipperman, J. S., and R. A. Burdisso, “Adaptive Feedforward Control of Nonminimum-
`Phase Structural Systems,” Journal of Sound and Vibration, 183(3), June 1995, pp. 369-
`382.
`44. Burdisso, R. A., J. S. Vipperman, and C. R. Fuller, "Causality Analysis of Feedforward
`Controlled Systems,'' Journal of Acoustical Society of America. 94(1), July 1993, pp.
`234-242.
`45. Vipperman, J. S., R. A. Burdisso, and C. R. Fuller, 1993, "Active Control of Broadband
`Structural Vibration Using the LMS Adaptive Algorithm,'' Journal of Sound and
`Vibration. 166(2), Sep. 1993, pp. 283-299.
`
`
`
`Books, Book Chapters:
`1. Flat Products Volume of the 11th Edition of Making, Shaping, and Treating of Steel, by Vladimir fea
`2. Finite-Element Modeling and Microstructural Evaluation of Centrifugally Cast High-Speed Steel
`Finishing Rolls (K.V. Redkin, J.S.Vipperman, C.Hrizo, R.Schleiden, C.I.Garcia), Dec. 2013, AIST.
`3. Raja Ramini, et al., “Review of the NIOSH Mining Safety and Health Research
`Program,”The National Academies Press, 2007.
`4. Bauer, ER, DR Babich and JS Vipperman [2006]. Equipment Noise and Worker Exposure
`in the Coal Mining Industry. DHHS (NIOSH) Publication No. 2007-105, IC 9492,
`December, 2006 77 pp.
`
`
`Patent Applications:
`1. JS Vipperman, CP Palmer, E. Rauterkus, JO Sharp, CM Dumm, “Hearing Screening and
`Amplification Device” Provisional Application No. 63/162,932, Filed 3/18/2021.
`
`
`
`Page 7 of 25
`
`

`

`8/25
`
`Vipperman, Jeffrey S. Page
`
`2. Allen, Peter, G. Elias, M. Scaife, J. Vipperman, C Dumm, T. Ferris, “Adjustable Retaining
`Arm System for Surgery,” Application No. US2018/016594 / WO 2018/144820 Al, filed
`February 2, 2018
`3. Surgical Tool Monitoring System and Methods of Use,” (Divisional Patent) Application No.
`10,772,643, 9/15/2020.
`
`Patents:
`1. Vipperman, J.S., C.H. Snyderman, T.S. Ryan, P.R. Johnson, “Surgical Tool Monitoring System and
`Methods of Use,” 9,980,738, 5/29/2018.
`2. Hensel, J.P., N. Black, J.D. Thornton, J.S. Vipperman, D.N. Lambeth, W.W. Clark, “Active
`Combustion Flow Modulation Valve,” United States Patent Number 8,540,209, Sep. 24,
`2013.
`3. Gemmen, Randall, Jimmy Thornton, Jeffrey S. Vipperman, William W. Clark, “Piezoelectric
`Axial Flow Microvalve,” United States Patent Number 7,159,841, Jan. 9, 2007.
`4. Clark, R. L., J. S. Vipperman, and Daniel G. Cole, “Adaptive Piezoelectric Sensoriactuator,”
`United States Patent Number 5,578,761, Nov. 26, 1996.
`
`Copyrights:
`1. “I Will,” Original song and guitar accompaniment by Jeffrey Vipperman, 2020.
`2. Military Impulse Noise Classifier Software. Jeffrey S. Vipperman, Brian A Bucci, Mathew
`Rhudy, 2009
`
`
`Shortcourses:
`1. Vipperman, J.S. “Acoustical Theory and Measurement,” Westinghouse Inc, 2008.
`2. Vipperman, J.S. “Noise and Vibration Measurements,” Brashear LP, 2006.
`3. Bernstein, Dennis, Robert Clark, Jeffrey Vipperman, and Ravinder Venugopal “Active
`Control of Vibration, Noise, and Structural-Acoustic Interaction”, Short Course presented at
`the American Controls Conference, Philadelphia, PA, June 22-23, 1998.
`
`Refereed Conference Proceedings:
`1. Dumm, Christopher, Anna Hiers, G. Klinzing, C.D. Balaban, J.S. Vipperman “Vibroacoustic
`Ultrasonic Resonant Behavior in Skull and Cranial Contents,” IMECE2021-70038, ASME-
`IMECE2021 Virtual Conference,USA, Abstract accepted.
`2. Whitefoot, John, JS Vipperman, “Designing At-home Laboratory Experiments Using Smart Phones
`and Basic Test Equipment for Senior Mechanical Engineering Students,” 2021 ASEE Annual
`Conference, July 26-29, Virtual.
`3. Dumm, Christopher, Anna Hiers, J.S. Vipperman, G. Klinzing, C.D. Balaban, “Ultrasonic Acoustic
`Heterodyne Transmission into the Human Auditory and Vestibular Systems,” IMECE2020-24213,
`ASME-IMECE2020 Conference, November 16-19, 2020, Portland, OR, USA.
`4. Saltsman, Brandon, C.A. Balaban, J.S. Vipperman, “Computational Modeling of Coagulopathy for
`Decision Support,” ASME IMECE Conference, Nov 9-15, 2018, Pittsburgh, PA.
`5. Saltsman, Brandon, C.A. Balaban, J.S. Vipperman, “Simulating Coagulopathy for Decision Support,”
`Computational and Mathematical Biomedical Engineering, April 10-12, 2017, Pittsburgh, PA.
`6. Ryan, TS and JS Vipperman, “Toward a Modeling Framework for Linear Stages,” (extended abstract)
`American Society of Precision Engineering 31st Annual Meeting, Portland, OR, Oct. 23-28, 2016.
`7. C.M. Dumm, J.S. Vipperman, J.V. Carvajal, M.M. Walter, L. Czerniak, A.S. Ruane, P. Ferroni, M.D.
`Heibel, “Predictive Modeling of Acoustic Signals from thermoacoustic Power Sensors (TAPS),”
`Proceedings of the 2016 24th International Conference on Nuclear Engineering, ICONE24, June 26-
`30, 2016, Charlotte, North Carolina.
`8. Li, Qi, “Two-dimensional arbitrary shape acoustic cloaks composed of homogeneous parts realized
`by layered structures,” ASME NCAD Paper NCAD20155924, NCAD/Internoise 2015 Conference,
`San Francisco, CA, August 9-12, 2015.
`
`
`
`Page 8 of 25
`
`

`

`9/25
`
`Vipperman, Jeffrey S. Page
`
`9. K.V. Redkin, B. Balakin, C. Hrizo, Vipperman, J.S., C.I. Garcia, “3D CFD Simulation of Horizontal
`Spin Casting of High Speed Steel Roll,” BAPS.2013.DFD.1B.85, 66th Annual Meeting of the APS
`Division of Fluid Dynamics, Pittsburgh, PA, Nov 24-26, 2013, abstract published in Bulletin of the
`American Physical Society, 58(18).
`10. Mang, Scott and J.S. Vipperman, “Comparison of Muffler Performance Criteria Using Finite Element
`Analysis and Field Measurement,” IMECE-2013-64690, Proceedings of ASME IMECE 2012, San
`Diego, CA Nov. 13-21, 2013.
`11. K.V. Redkin, J.S.Vipperman, C.Hrizo (WHEMCO), R.Schleiden (United Rolls), C.I.Garcia, "Multi-
`scale Finite Element Modeling and Microstructural Optimization of Cast High Speed Steel Finishing
`Rolls", 50th Rolling Seminar - Processes, Rolled and Coated Products, Brazilian Metallurgist,
`Materials and Mining Association (ABM), November 2013, Ouro Preto, Brazil
`12. K.V. Redkin, J.S.Vipperman, C.Hrizo (WHEMCO), R.Schleiden (United Rolls), C.I.Garcia,
`"Microstructural Optimization and Enhanced Performance of HSS Work Rolls by Non-Conventional
`Heat Treatment", Materials Science and Technology 2013 Conference and Exhibition, October 2013,
`Montreal, Quebec, Canada.
`13. K.V. Redkin, Vipperman, J.S., C. Hrizo, R. Schleiden, C.I. Garcia, “Multi-Scale Finite Element
`Modeling and Microstructural Optimization of Cast High Speed Steel Finishing Rolls,” PR-364-194,
`2013 AISTech Conference Proceedings, Pittsburgh, PA, May 6-9, 2013.
`14. Wang, Chenzhi, Jae Bum Pahk, C. D. Balaban, J. Muthu, D. Vorp, J.S. Vipperman, “Biomechanical
`Assessment of the Bridging Vein Rupture of Blast Induced Traumatic Brain Injury Using the Finite
`Element Human Head Model,” IMECE2012-88739, Proceedings of IMECE-12, Houston, TX, Nov 9-
`15, 2012.
`15. Shelton, Christopher, and J.S. Vipperman, Ed Nykaza, Dan Valente, “Six Noise Type Artificial Neural
`Network Military Noise Classifier,” ASME NCAD/Internoise Conference, Aug. 19-22, 2012.
`16. Wang, Chenzhi, Jae Bum Pahk, C. D. Balaban, J.S. Vipperman, “Computational Study on the Bridging
`Vein Rupture, of Blast-Induced Traumatic Brain Injury Using a Numerical Human Head Model”
`IMECE2011-65733, Proceedings of IMECE-11, Denver, CO, Nov 11-17, 2011.
`17. Nick Kirsch, Daniel Cole, Jeffrey S. Vipperman, Stephen J. Ludwick, “Characterization Of Periodic
`disturbances In Rolling Element Bearings Using An Optical Sensor,” IMECE2011-66015, Proceedings
`of ASME IMECE-11, Denver, CO.
`18. Nick Kirsch, Daniel G. Cole, Jeffrey S. Vipperman, Stephen J. Ludwick. “Characterization of Periodic
`Disturbances in Rolling Element Bearings Using and Optical Sensor,” Proceedings of ASPE,
`November 13–November 18, 2011.
`19. Ryan, T. S., L.A. Schaefer, and J.S. Vipperman, “Control of a Standing Wave Thermoacoustic
`Refrigerator,” IMECE2010-38966, Proceedings of ASME IMECE-10, November 12-18, 2010,
`Vancouver, BC, Canada.
`20. Brian A. Bucci, Daniel G. Cole, Jeffrey S. Vipperman, Stephen J. Ludwick. “Practical friction
`compensation for ultra-precision point-to-point motion.” Proceedings of ASPE, October 31-November
`5, 2010 Atlanta, Georgia.
`21. Rhudy, M., B. Bucci, J.S. Vipperman, J. Allanach, B. Abraham, “Microphone Array Analysis
`Methods Using Cross-Correlations,” IMECE2009-10798, Proceedings of ASME IMECE-09,
`November 13-19, 2009, Lake Buena Vista, FL.
`22. Zink, Florian, “Influence of the Thermal Properties of the Driving Components on the Performance of
`a Thermoacoustic Engine,” IMECE2009-11325, Proceedings of ASME IMECE-09, November 13-19,
`2009, Lake Buena Vista, FL.
`23. Brian A. Bucci, Daniel G. Cole, Jeffrey S. Vipperman, Stephen J. Ludwick. “Friction modeling of
`linear rolling element bearings in high precision linear stages.” Proceedings of ASPE, October 5-9,
`2009 Monterey, California.
`24. Zink, Florian, J.S. Vipperman, and L.A. Schaefer, “Heat Transfer Analysis in Thermoacoustic
`Regenerators Using CFD Simulation,” ASME 2009 Heat Transfer Summer Conference, San
`Francisco, CA, July 19–23, 2009.
`
`
`
`Page 9 of 25
`
`

`

`10/25
`
`Vipperman, Jeffrey S. Page
`
`25. Zink, Florian, J.S. Vipperman, and L.A. Schaefer, “Advancing Thermoacoustics Through CFD
`Simulation Using Fluent,” ASME IMECE 2008 Conference, IMECE2008-66510 pp. 101-110,
`Boston, MA, October 31–November 6, 2008.
`26. Bucci, Brian A. and J.S. Vipperman, “An Investigation of the Characteristics of a Bayesian Military
`Impulse Noise Classifier,” Proceedings of NCAD2008, Paper NCAD2008-73046, Dearborn
`Michigan, July 28-30, 2008.
`27. Li, Deyu, J.S. Vipperman, Li Cheng, “Noise Control in a Small Enclosure Using T-Shaped Acoustic
`Resonators,” Proceedings of NCAD2008, Paper NCAD2008-73034, Dearborn Michigan, July 28-30,
`2008.
`28. DeJohn, David and J.S. Vipperman, “Development and Control of “Stiff Drivers” for Thermoacoustic
`Refrigeration,” IMECE2007-41586, ASME IMECE-07 Conference, Nov 11-15, 2007, Seattle,
`Washington.
`29. Bucci, Brian, and J. S. Vipperman, “Bayesian Military Impulse Noise Classifier,” IMECE2007-
`41700, ASME IMECE-07 Conference, Nov 11-15, 2007, Seattle, Washington.
`30. Schimoler, Patrick, J.S. Vipperman, Laurel Kuxhaus, Angela M. Flamm, Daniel D. Budny, Mark E.
`Baratz, Mark C. Miller, “Control System for an Elbow Joint Motion Simulator,” IMECE2007-42806,
`ASME IMECE-07 Conference, Nov 11-15, 2007, Seattle, Washington.
`31. Bucci, Brian, and J. S. Vipperman, “Artificial Neural Network Military Impulse Noise Classifier,”
`ASME IMECE-06, Nov 5-10, Chicago, IL.
`32. Brian Bucci, Jeffrey S. Vipperman, William W. Clark, Mark Kim, Jimmy D. Thornton, Peter Hensel,
`“Piezoelectric Microvalve,” ASME IMECE-06, Nov 5-10, Chicago, IL.
`33. Smith, Adam K. and J. S. Vipperman, “Adaptive Resonant Mode Acoustic Controller,” IMECE2005-
`89279, ASME IMECE 2005, Nov. 5-11, Orlando, FL.
`34. Rodgers, Jesse C., William W. Clark, and Jeffrey S. Vipperman, “Analysis and Testing of a
`Thunder(TM) Piezoelectric Actuator as an Actuator in an Air Flow Control Valve,” Proceedings of
`SPIE Smart Structures and Materials, March 6-10, 2005, San Diego, CA.
`35. El-Kurdi, Mohammed S., J. Scott Van Epps, Robert J. Toth, Douglas W. Hamilton, Chuanyue Wu,
`Jeffrey S. Vipperman, David A. Vorp, “Regulation of Cell Adhesion and De-Adhesion Proteins in
`Veins Perfused Under Arterial Conditions Ex-Vivo,” paper number IMECE2004-61531, ASME
`IMECE 2004, Nov. 13-19, Anaheim, CA.
`36. Hensel, J. Peter, Randall S. Gemmen, Brian Hetzer, Jimmy Thornton, Jeffrey S. Vipperman, William
`Clark, Fatih Ayhan, “F