David W. Rosen
`Professor
`The George W. Woodruff School of Mechanical Engineering
`
`I.
`
`EARNED DEGREES
`
`Degree
`
`Ph.D.
`M.S.
`B.ME.
`
`Year University
`
`1992 University of Massachusetts
`1987 University of Minnesota
`1985 University of Minnesota
`
`Field
`
` _
`
`Mechanical Engineering
`Mechanical Engineering
`Mechanical Engineering
`
`II.
`
`EMPLOYMENT HISTORY
`
`Title
`
`Organization
`
`Research Director
`for DManD Center
`
`Engineering Product Development Pillar,
`Singapore University of Technology and Design
`
`Professor & Research Engineering Product Development Pillar,
`Director for DManD Singapore University of Technology and Design
`Center
`
`Visiting Professor
`
`School of Mechanical and Aerospace Engineering
`Nanyang Technological University, Singapore
`
`Associate Chair for
`Administration
`
`George W. Woodruff School of Mechanical Engineering
`Georgia Institute of Technology, Atlanta, GA.
`
`Associate Chair for
`Graduate Studies
`
`George W. Woodruff School of Mechanical Engineering
`Georgia Institute of Technology, Atlanta, GA.
`
`Visiting Professor
`
`Dept. of Mechanical and Manufacturing Engr.,
`Loughborough University, Loughborough, UK
`
`Years
`
`2018-present
`
`2016-2018
`
`2015 - 2016
`
`2009 - 2016
`
`2007 – 2009
`
`2005 - 2011
`
`Professor
`
`George W. Woodruff School of Mechanical Engineering
`Georgia Institute of Technology, Atlanta, GA.
`
`2004 – present
`
`Associate Professor
`
`George W. Woodruff School of Mechanical Engineering
`
`Assistant Professor
`
`George W. Woodruff School of Mechanical Engineering
`
`1998-2004
`
`1992-1998
`
`Instructor
`
`George W. Woodruff School of Mechanical Engineering
`
`Summer 1992.
`
`Research Assistant
`
`1989 – 1992
`Mechanical Design Automation Laboratory,
`Department of Mechanical Engineering, University of Massachusetts, Amherst, MA.
`
`Visiting Research
`Scientist
`
`Ford Scientific Research Laboratory,
`Ford Motor Co., Dearborn, MI.
`
`Software Engineer
`
`Computervision and Prime Computer, Bedford, MA.
`
`Research and
`
`Teaching Assistant
`
`Department of Mechanical Engineering,
`University of Minnesota, Minneapolis, MN.
`
`Programmer
`
`Programmer
`
`Control Data Corporation, St. Paul, MN.
`
`Department of Mechanical Engineering,
`University of Minnesota, Minneapolis, MN.
`
`1990
`
`1987 – 1989
`
`1984 – 1987
`
`1986
`
`1984
`
`Intern Engineer
`
`General Resource Corporation, Hopkins, MN.
`
`1981 – 1983
`
`1
`
`Page 1 of 67
`
`Markforged Ex. 1015
`Markforged v. Continuous Composites, IPR2022-01220
`
`

`

`III.
`
`HONORS AND AWARDS
`
`A.
`
`International or National Awards
`
`1. Best Paper Award in the Artificial Intelligence and Expert Systems section at the ASME Computers
`in Engineering Conference for paper #8 in Conference Presentations with Proceedings, August
`1992.
`
`2. Distinguished Paper Award in ASME Design Theory and Methodology Conference for paper #26 in
`section IV.B (Refereed Conference Proceedings), August 1996.
`
`3. Engineer of the Year in Education, Society of Professional Engineers, Metro Atlanta Section, 1997.
`
`4. Highly Commended Award (awarded by the Literati Club of MCB Press) for paper IV.B.1.15,
`published in the Rapid Prototyping Journal, 1999.
`
`5. Fellow, American Society of Mechanical Engineers, 2003.
`6. 2nd Runner Up, Excellence Award, 3D Systems North American User Group Conference, Destin,
`FL, March 24-27, 2003.
`7. 2nd Runner Up, Stereolithography Excellence Award, 3D Systems North American User Group
`Conference, Anaheim, CA, April 26-29, 2004.
`8. 1st Runner Up, Stereolithography Excellence Award, 3D Systems North American User Group
`Conference, Tucson, AZ, April 3-8, 2005.
`
`9. Outstanding Paper Award, Solid Freeform Fabrication Symposium, 2005 (for IV.B.2.78).
`
`10. Best Paper Award, ASME CIE Conference, 2005 (for IV.B.2.85).
`11. 1st Runner Up, Stereolithography Excellence Award, 3D Systems North American User Group
`Conference, Tucson, AZ, April 30 – May 4, 2006.
`
`12. Best Presentation Award, Solid Freeform Fabrication Symposium, Austin, TX, Aug. 6-8, 2007 (for
`paper IV.D.66).
`
`13. Best Paper Award, ASME Design for Manufacturing and Life Cycle Conference, 2008. Authors:
`C.B. Williams, F. Mistree, D.W. Rosen (for paper IV.B.2.102).
`
`14. Outstanding Paper Award, Solid Freeform Fabrication Symposium, Austin, TX, Aug. 4-6, 2008 (for
`paper IV.D.69).
`
`15. First Place, Selective Laser Sintering Excellence Award, 3D Systems User Group Conference,
`Daytona Beach, FL, March 15-19, 2009.
`
`16. Best Paper Award, ASME Computers & Information in Engineering Conference, 2009. Authors:
`G.C. Graf, J. Chu, S. Engelbrecht, D.W. Rosen (for paper IV.B.2.104).
`
`17. Outstanding Paper Award, Solid Freeform Fabrication Symposium, Austin, TX, Aug. 9-11, 2010
`(for paper IV.D.81).
`
`18. Best Paper Award, Virtual and Rapid Prototyping Conference, Leiria, Portugal, Sept 28 - Oct 1,
`2011 (for paper IV.D.85).
`
`19. Best Paper Award, Int’l Conference on MicroManufacturing, Chicago, March 12-14, 2012, (for
`paper IV.B.2.124).
`
`20. ASME Computers and Information in Engineering Division Excellence in Research Award, 2012.
`
`21. Solid Freeform Fabrication Symposium, International Freeform and Additive Manufacturing
`Excellence (FAME) Award, 2013.
`
`22. Outstanding Presentation Award, Solid Freeform Fabrication Symposium, 2013 (for paper
`IV.B.2.137).
`
`2
`
`Page 2 of 67
`
`Markforged Ex. 1015
`Markforged v. Continuous Composites, IPR2022-01220
`
`

`

`23. Best Paper Award, International Conference on Progress in Additive Manufacturing, Singapore,
`May 26-28, 2014 (for paper IV.B.2.141).
`
`24. Best Paper Award, ASME Computers and Information in Engineering Conference, Systems
`Engineering, Information, and Knowledge Management Technical Committee, Aug. 22, 2016 (for
`paper IV.B.2.158).
`
`25. Best Paper Award, ASME Computers and Information in Engineering Conference, Computer-Aided
`Product and Process Design Technical Committee, Aug. 27, 2018 (for paper IV.B.2.167).
`
`26. Best Paper Award, Journal of Manufacturing Systems, for paper IV.A.2.71 for the paper with the
`most citations during 2015-2019.
`
`27. ASTM International Additive Manufacturing Award of Excellence in Research, Nov. 2021.
`
`B.
`
`Institute or School Awards
`
`1. Best Masters Thesis Award for Matthew Bauer’s Masters thesis, Georgia Tech chapter of Sigma Xi
`1998.
`
`IV.
`
`RESEARCH, SCHOLARSHIP, AND CREATIVE ACTIVITIES
`
`A. Published Books, Book Chapters, and Edited Volumes
`
`1.
`
`Books
`
`1. Gibson, I, Rosen, D.W., Stucker, B., Additive Manufacturing Technologies: Rapid Prototyping to
`Direct Digital Manufacturing, Springer, 2010. ISBN: 978-1-4419-1119-3.
`
`2. Gibson, I, Rosen, D.W., Stucker, B., Additive Manufacturing Technologies: 3D Printing, Rapid
`Prototyping, and Direct Digital Manufacturing, Second Edition, Springer, 2015. ISBN: 978-1-
`4939-2113-3.
`
`3. Gibson, I, Rosen, D.W., Stucker, B., Khorasani, M., Additive Manufacturing Technologies, Third
`Edition, Springer, 2021. ISBN 978-3-030-56127-7
`
`2.
`
`Refereed Book Chapters
`
`1. Bauer, M. D., Siddique, Z., and Rosen, D. W., “Virtual Prototyping In Simultaneous
`Product/Process Design For Disassembly.” Book chapter in: Rapid Response Manufacturing:
`Contemporary Methodologies, Tools and Technologies, Ed. John Dong, Chapman & Hall, 1997.
`
`2. Rosen, D.W., “Design-to-Manufacture Information Transfer in the Context of Solid Freeform
`Fabrication Technologies.” Book chapter in: Knowledge Intensive Computer Aided Design, Ed. S.
`Finger, T Tomiyama, and M. Mantyla, Kluwer Academic Publishers, Boston, 2000.
`
`3. Rosen, D.W. and Gibson, I., “Decision Support and System Selection for RP,” Book chapter in
`Software Solutions for RP, Ed. I. Gibson, Professional Engineering Publishing, Ltd., UK, 2002.
`
`4.
`
`Siddique, Z. and Rosen, D.W., “Common Platform Architecture: Identification for a Set of
`Similar Products,” Chapter 9 in: The Customer Centric Enterprise: Advances in Mass
`Customization and Personalization, Ed. M. Tseng and F. Pillar, Springer, New York/Berlin, pp.
`163-182, 2003.
`
`5. Ebert-Uphoff, I., Gosselin, C.M., Rosen, D.W., and Laliberte, T., “Rapid Prototyping for
`Robotics.” Book chapter in: Cutting Edge Robotics, Advanced Robotic Systems, International,
`2005.
`
`6. Allen, J.K., Bras, B., Mistree, F., Paredis, C., Rosen, D.W., “Georgia Institute of Technology: The
`Systems Realization Laboratory,” Chap. 26 in Design Process Improvement – A Review of Current
`Practice, Clarkson, P. J.; Eckert, C. (Eds.), pp. 490-493, 2005.
`
`3
`
`Page 3 of 67
`
`Markforged Ex. 1015
`Markforged v. Continuous Composites, IPR2022-01220
`
`

`

`7. Williams, C.B., Allen, J.K., Rosen, D.W., Mistree, F., “Process Parameter Platform Design to
`Manage Workstation Capacity,” Simpson, T. W., Siddique, Z. and Jiao, J., Eds., Product Platform
`and Product Family Design: Methods and Applications, Springer, New York, pp. 421-456, 2005.
`
`8. Wilson, J. and Rosen, DW, “Design for Rapid Manufacturing under Epistemic Uncertainty,"
`Rapid Prototyping: Theory and Practice, Chap. 11, eds.: Kamrani, A., Springer, pp. 271-291,
`2006.
`
`9. Panchal, J.H., Choi, H-J., Allen, J.K., Rosen, D., Mistree, F., “An Adaptable Service-based
`for Distributed Product Realization,” Collaborative Product Design and
`Framework
`Manufacturing Methodologies and Applications, Eds. W.D. Li, S.K. Ong, A.Y.C. Nee, C.A.
`McMahon, Springer-Verlag, pp. 1-37, 2007.
`
`10. Sager, B., Rosen, D.W., “Simulation Methods for Stereolithography,” chapter 8
`Stereolithography: Materials, Processes and Applications, ed. P. Bartolo, Springer, 2010.
`
`in:
`
`11. Wu, D., Rosen, D.W., Schaefer, D., “Cloud-Based Design and Manufacturing: Status and
`Promise,” Chapter 1 in Cloud-Based Design and Manufacturing, ed. D. Schaefer, Springer, 2014.
`
`12. Hopkinson, N., Rosen, D.W., “Modeling for Polymer AM Processes,” ASM Handbook Volume
`24A: Additive Manufacturing Processes, D.L. Bourell, W. Frazier, H. Kuhn, and M. Seifi,
`editors, 2020.
`
`13. Rosen, D.W., Kim, S., “Design and Manufacturing Implications of AM,” ASM Handbook Volume
`24A: Additive Manufacturing Processes, D.L. Bourell, W. Frazier, H. Kuhn, and M. Seifi,
`editors, 2020. doi: 10.31399/asm.hb.v24.a0006560
`
`3.
`
`Edited Volumes
`
`1. Michopoulos, J., Paredis, C.C., Rosen, D.W., Vance, J., Editors, Advances in Computers and
`Information in Engineering Research, ASME Press, 2014. ISBN-13: 978-0791860328
`
`2. Michopoulos, J., Paredis, C.C., Rosen, D.W., Vance, J., Editors, Advances in Computers and
`Information in Engineering Research, Volume 2, ASME Press, 2021. ISBN: 9780791862025
`
`B. Refereed Publications and Submitted Articles
`
`1.
`
`Published and Accepted Journal Articles
`
`1. Rosen, D. W., Riley, D. R., and Erdman, A. G., “A Knowledge-Based Dwell Mechanism Assistant
`Designer,” ASME Journal of Mechanical Design, vol. 113, no. 3, pp. 205-212, 1991.
`
`2. Rosen, D. W. and Grosse, I., “A Feature-Based Shape Optimization Technique for the Configuration
`and Parametric Design of Flat Plates,” Engineering with Computers, vol. 8, pp. 81-91, 1992.
`
`3. Rosen, D. W. and Dixon, J. R., “Languages for Feature-Based Design and Manufacturability
`Evaluations,” International Journal of Systems Automation: Research and Applications, vol. 2, no. 4,
`pp. 353-373, 1992.
`
`4. Rosen, D. W. and Peters, T. J., “Topological Properties that Model Feature-Based Representation
`Conversions within Concurrent Engineering,” Research in Engineering Design, vol. 4, no. 3, pp.
`147-158, 1992.
`
`5. Rosen, D. W., “Feature-Based Design: Four Hypotheses for Future CAD Systems,” Research in
`Engineering Design, vol. 5, no. 3, pp. 125-138, 1993. Also a conference publication: IV.B.11.
`
`6. Rosen, D. W., Dixon, J. R., and Finger, S., “Conversions of Feature-Based Design Representations
`using Graph Grammar Parsing,” ASME Journal of Mechanical Design, 116(3), pp. 785-792, 1994.
`Also a conference publication: IV.B.9.
`
`7. Peters, T. J., Rosen, D. W., and Dorney, S. M., “The Diversity of Topological Applications within
`Computer-Aided Geometric Design,” Annals of the New York Academy of Sciences, Papers on
`General Topology and Applications, (eds.) Andima, S. et al, Vol. 728, pp. 198-209, 1994.
`
`4
`
`Page 4 of 67
`
`Markforged Ex. 1015
`Markforged v. Continuous Composites, IPR2022-01220
`
`

`

`8. Peters, T. J., Rosen, D. W., and Shapiro, V., “A Topological Model of Limitations in Design for
`Manufacturing,” Research in Engineering Design. Vol. 6, No. 4, pp. 223-233, 1994.
`
`9. Rosen, D. W., Bras, B. A., Hassenzahl, S. L., Newcomb, P. J., Yu, T., “Towards Computer-Aided
`Configuration Design for the Life Cycle,” J. of Intelligent Manufacturing. Vol. 7, pp. 145-60, 1996.
`
`10. Rosen, D. W. and Peters, T. J., “The Role of Topology in Engineering Design Research,” Research
`in Engineering Design, Vol 8, No. 2. pp. 81-98, 1996.
`
`11. Coulter, S. L., Bras, B., and Rosen, D. W., “Formulating and Solving Parametric Design Problems
`involving Non-Interference Constraints,” Engineering with Computers, Vol. 13, pp. 112-24, 1997.
`Also a conference publication: IV.B.21.
`
`12. Koenig, P C, Duffey, M R, Rosen, D W, Singh, P, “Design Infrastructure in Shipbuilding and Other
`Heavy Industries,” Transactions of the Society of Naval Architects and Marine Engineers. Vol. 104,
`pp. 191-217, 1997. Also a conference publication: IV.B.29.
`
`13. Siddique, Z, Rosen, D W, “Automated Product Disassembly Reasoning,” Computer-Aided Design,
`vol. 29, no. 12, pp. 847-860, 1997.
`
`14. Simpson, T.W., Rosen, D W, Allen, J K, Mistree, F, “Metrics for Assessing Design Freedom and
`Information Certainty in the Early Stages of Design,” ASME Journal of Mechanical Design, Vol.
`120, pp. 628 – 635, December 1998. Also a conference publication: IV.B.28.
`
`15. McClurkin, J. E. and Rosen, D. W., “Computer-Aided Build Style Decision Support for
`Stereolithography,” Rapid Prototyping Journal, Vol. 4, No. 1, pp. 4-13, 1998.
`
`16. Newcomb, P J, Bras, B A, Rosen, D W, “Implications of Modularity on Product Design for the Life
`Cycle,” ASME J. of Mechanical Design. Vol. 120, No. 3, pp. 483-90, September 1998.
`doi.org/10.1115/1.2829177 Also a conference publication: IV.B.26.
`
`17. Bauer, M. D., Siddique, Z., and Rosen, D. W., “A Virtual Prototyping System for Design for
`Assembly, Disassembly, and Service,” J. of Agile Manufacturing, Vol. 2, No. 2, pp. 119-138, 1999.
`
`18. Han, J.-H. and Rosen, D. W., “Special Panel Session for Feature Recognition at the 1997 ASME
`Computers in Engineering Conference,” Computer-Aided Design, Vol. 30, No. 13, pp. 979-981,
`1998.
`
`19. Bauer, M. D. and Rosen, D. W., “A Modified Pattern Search Method with Relaxed Lexicographic
`Minimization for Engineering Design,” Engineering Optimization, Vol. 32, pp. 219-247, 1999.
`
`20. Lynn-Charney, C.M. and Rosen, D.W., “Accuracy Models and Their Use in Stereolithography
`Process Planning,” Rapid Prototyping Journal, Vol. 6, No. 2, pp. 77-86, 2000.
`
`21. Harper, B. D. and Rosen, D. W., “Computer-Aided Design for Product De- & Remanufacture,” J. of
`Design and Manufacturing Automation, Vol. 4, No. 1, pp. 37-46, 2001.
`
`22. Siddique, Z. and Rosen, D.W., “On Discrete Design Spaces for the Configuration Design of Product
`Families,” Artificial Intelligence in Engineering, Design, Automation, and Manufacturing, Vol. 15,
`pp. 1-18, 2001. https://doi.org/10.1017/S0890060401152029
`
`23. West, A.P., Sambu, S., and Rosen, D.W., “A Process Planning Method for Improving Build
`Performance in Stereolithography,” Computer-Aided Design, Vol. 33, No. 1, pp. 65-80, 2001.
`
`24. Dutta, D., Prinz, F.B., Rosen, D., and Weiss, L., “Layered Manufacturing: Current Status and Future
`Trends,” ASME Journal of Computing and Information Science in Engineering, Vol. 1, No. 1, pp.
`60-71, 2001.
`
`25. Hemrick, J., Starr, T., and Rosen, D., “Release Behavior for Powder Injection Molding in
`Stereolithography Molds,” Rapid Prototyping Journal, Vol. 7, No. 2, pp. 115 – 121, 2001.
`
`5
`
`Page 5 of 67
`
`Markforged Ex. 1015
`Markforged v. Continuous Composites, IPR2022-01220
`
`

`

`26. Gerhard, J.F., Rosen, D., Allen, J.K., and Mistree, F., “A Distributed Product Realization
`Environment for Design and Manufacturing,” ASME Journal of Computing and Information Science
`in Engineering, Vol. 1, No. 3, pp. 235-244, 2001.
`
`27. Kataria, A. and Rosen, D.W., “Building Around Inserts: Methods for Fabricating Complex Devices
`in Stereolithography,” Rapid Prototyping Journal, Vol. 7, No. 5, pp. 253-261, 2001.
`
`28. Chen, Y. and Rosen, D.W., “A Region Based Method to Automated Design of Multi-Piece Molds
`with Application to Rapid Tooling,” ASME Journal of Computing and Information Science in
`Engineering, Vol. 2, No. 2, pp. 86-97, 2002.
`
`29. Tse, L.A., Hesketh, P.J., Rosen, D.W., Gole, J.L., “Stereolithography on Silicon for Microfluidics
`and Microsensor Packaging,” Microsystem Technologies, Vol. 9, pp. 319-323, 2003.
`
`30. Chen, Y. and Rosen, D.W., “A Reverse Glue Approach to Automated Construction of Multi-Piece
`Molds With Application to Rapid Tooling,” ASME Journal of Computing and Information Science in
`Engineering, Vol. 3, No. 3, pp. 219-230, 2003.
`
`31. Rosen, D.W., Chen, Y., Sambu, S., Allen, J.K., Mistree, F., “The Rapid Tooling Testbed: A
`Distributed Design-for-Manufacturing System,” Rapid Prototyping Journal, Vol. 9, No. 3, pp. 122-
`132, 2003.
`
`32. Corbett, B. and Rosen, D.W., “A Configuration Design Based Method for Platform Commonization
`for Product Families,” Artificial
`Intelligence
`in Engineering, Design, Automation, and
`Manufacturing, Vol. 18, No. 1, pp. 21-39, 2004. doi.org/10.1017/S089006040404003X
`
`33. Sambu, S., Chen, Y., and Rosen, D.W., “Geometric Tailoring: A Design For Manufacturing
`Method for Rapid Prototyping and Rapid Tooling,” ASME Journal of Mechanical Design, Vol. 126,
`No. 4, pp. 571-580, 2004. DOI: 10.1115/1.1758250
`
`34. Chan, D.C.N., Frazier, K.B., Tse, L.A., Rosen, D.W., “Application of Rapid Prototyping to
`Operative Dentistry Curriculum,” Journal of Dental Education, Vol. 68, No. 1, pp. 64-70, 2004.
`
`35. Tang, Y, Henderson, C, Muzzy, J., Rosen, D.W., “Stereolithography Cure Modeling and
`Simulation,” Int. J. Materials and Product Technology, Vol. 21, No. 4, pp.255-272, 2004.
`
`36. Xiao, A., Zeng, S., Allen, J.K., Rosen, D.W., Mistree, F., “Collaborative Multidisciplinary Decision
`Making using Game Theory and Design Capability Indices,” Research in Engineering Design, Vol.
`16, No. 1, pp. 57-72, 2005.
`
`37. Fernández, M.G., Seepersad, C.C., Rosen, D.W., Allen, J.K., Mistree, F., “Decision Support in
`Concurrent Engineering – The Utility-Based Selection Decision Support Problem,” Concurrent
`Engineering: Research & Applications, Vol. 13, No. 1, pp. 13-28, 2005.
`
`38. Khosrowjerdi, M., Kinzel, G.L., Rosen, D.W., “Computers in Education: Activities, Contributions,
`and Future Trends,” ASME J. of Computing and Information Science in Engineering, Vol. 5, No. 3,
`pp. 257-263, 2005.
`
`39. Limaye, A, Rosen, D.W., “Process Planning Method for Mask Projection Micro-Stereolithography,”
`Rapid Prototyping Journal, Vol. 13, No. 2, pp. 76-84, 2007.
`
`40. Limaye, A, Rosen, D.W., “Compensation zone approach to avoid Z errors in Mask Projection
`Stereolithography builds,” Rapid Prototyping Journal, Vol.12, No. 5, pp. 283-291, 2006.
`
`41. Pierce, RS, Rosen, DW, “A Method for Integrating Form Errors Into Geometric Tolerance
`Analysis,” ASME Journal of Mechanical Design, Vol. 130, No. 1, 2008.
`
`42. An, N., Lu, J.-C., and Rosen, D., Ruan, L., “Supply-Chain Oriented Robust Parameter Design,”
`International Journal of Production Research – Special Issue on Advances on Quality Engineering,
`Vol. 45, No. 23, pp. 5465-5484, 2007.
`
`6
`
`Page 6 of 67
`
`Markforged Ex. 1015
`Markforged v. Continuous Composites, IPR2022-01220
`
`

`

`43. Xiao, A., Seepersad, C.C., Allen, J.K., Rosen, D. W., Mistree, F., “Design for manufacturing:
`application of collaborative multidisciplinary decision-making methodology,” Engineering
`Optimization, Vol. 39 Issue 4, p. 429-451, 2007. DOI: 10.1080/03052150701213104
`44. Pierce, RS, Rosen, DW, “Simulation of Mating Between Non-Analytic Surfaces Using a
`Mathematical Programming Formulation,” ASME J. of Computing and Information Science in
`Engineering, Volume 7, Issue 4, pp. 314-321, 2007.
`
`45. Choi, H-J, McDowell, DL, Allen, JK, Rosen, DW, Mistree, F, “An Inductive Design Exploration
`Method for Robust Multiscale Materials Design,” ASME J. of Mechanical Design, vol.130, no.4, pp.
`287-307, 2008. DOI: 10.1115/1.2829860.
`
`46. Rosen, D.W., “Computer-Aided Design for Additive Manufacturing of Cellular Structures,”
`Computer-Aided Design & Applications, Vol. 4, No. 5, 585-594, 2007.
`
`47. Williams, C.B., Allen, J. K., Rosen, D. W. and Mistree, F. (2007) “Designing Platforms for
`Customizable Products and Processes in Markets with Non-Uniform Demand.” Concurrent
`Engineering: Research and Applications, 15(2), 201-216.
`
`48. Yim, S., Rosen, D.W., “A Repository for Design for Manufacturing Problems using Description
`Logics,” J. of Manufacturing Technology Management, Vol. 19, No. 6, pp. 755-774, 2008.
`
`49. Udoyen, N., Rosen, D.W., “Description Logic Representation of Finite Element Analysis Models for
`Automated Retrieval,” ASME J. of Computing and Information Science in Engineering, Vol. 8, No.
`3, 2008.
`
`50. Sager, B., Rosen, D.W., “Use of Parameter Estimation for Stereolithography Surface Finish
`Improvement,” Rapid Prototyping Journal, Vol. 14, No. 4, pp. 213-220, 2008.
`
`51. Chu, C, Graf, G, Rosen, D.W., “Design for Additive Manufacturing of Cellular Structures,”
`Computer-Aided Design & Applications, Vol. 5, No. 5, 2008.
`
`52. Udoyen, N, Rosen, D.W., “Reusability-Based Selection of Parametric Finite Element Analysis
`Models,” Artificial Intelligence in Engineering Design, Analysis, and Manufacturing, Vol. 23, pp.
`197-214, 2009.
`
`53. Chu, C., Engelbrecht, S., Graf, G.C., Rosen, D.W., “A Comparison of Synthesis Methods for
`Cellular Structures with Application to Additive Manufacturing,” Rapid Prototyping Journal, Vol.
`16, No. 4, pp. 275-283, 2010, doi: 10.1108/13552541011049298.
`
`54. Wilson, J.O., Nelson, B.A., Rosen, D.W., Yen, J., “The Effects of Biological Examples in Idea
`Generation,” Design Studies, Vol. 31, Issue 2, pp. 169-186, 2010.
`
`55. Wilson, J.O., Nelson, B.A., Rosen, D.W., Yen, J., “Refined Metrics for Measuring Ideation
`Effectiveness,” Design Studies, Vol. 30, pp 737-743, 2009.
`
`56. Meacham, JM, O’Rourke, A, Yang, Y, Fedorov, AG, Degertekin, FL, Rosen, DW, “Experimental
`Characterization of High Viscosity Droplet Ejection,” ASME Manufacturing Science and
`Engineering, Vol. 132, No. 3, paper #030905, June 2010.
`57. Williams, C.B., Cochran, J.K., Rosen, D.W., “Additive Manufacturing of Metallic Cellular
`Materials via Three-Dimensional Printing,” Int’l J of Advanced Manufacturing Technology, Vol. 53,
`No. 1-4, pp. 231-239, 2011.
`58. Wang, Y., Rosen, D.W., “Multiscale Heterogeneous Modeling with Surfacelets,” Computer-Aided
`Design & Applications, Vol. 7, No. 5, 759-776, 2010.
`59. Jariwala, A.S., Ding, F., Boddapati, A., Breedveld, V., Grover, M., Henderson, C., Rosen, D.W.,
`“Modeling Effects of Oxygen Inhibition in Mask based Stereolithography,” Rapid Prototyping
`Journal, Vol. 17, No. 3, pp 168-175, 2011.
`
`7
`
`Page 7 of 67
`
`Markforged Ex. 1015
`Markforged v. Continuous Composites, IPR2022-01220
`
`

`

`60. Williams, C.B., Mistree, F., Rosen, D.W., “A Functional Classification Framework for the
`Conceptual Design of Additive Manufacturing Technologies,” ASME J. of Mechanical Design, Vol.
`133, No. 12, paper 121002, Dec. 2011.
`61. Kang, J., Scholz, T., Ku, D.N., Rosen, D.W., “Pump Design for a Portable Renal Replacement
`System,” ASME J. of Medical Devices, Vol. 5, paper 031008, 2011.
`62. Chang, P.S., Rosen, D.W., “The Size Matching and Scaling Method: A Synthesis Method for the
`Design of Mesoscale Cellular Structures,” Int’l J. Computer Integrated Manufacturing, Vol. 26,
`Issue 10, pp. 907-927, 2012.
`63. Zhou, W., Loney, D., Degertekin, F.L., Fedorov, A.G., Rosen, D.W., “Droplet Impact Dynamics in
`Ink-Jet Printing,” Virtual and Physical Prototyping, Vol. 7, No. 1, pp. 49-64, 2012.
`64. Wu, W, Zhao, J, Zhang, L, Feng, N, Rosen, DW, “Customized Titanium Plate Virtual Design and
`Deformation Simulation Analysis of Human Lateral Mandible Defect,” Applied Mechanics and
`Materials, Vol. 157-158, pp. 227-230, 2012.
`65. Schaefer, D., Thames, J.L, Wellman, R., Wu, D., Yim, S., Rosen, D., “Distributed Collaborative
`Design and Manufacture in the Cloud – Motivation, Infrastructure, and Education,” ASEE
`Computers in Education Journal (CoED), Vol. 3, No. 4, October-December 2012, pp. 1-16.
`66. Schwerzel, R.E., Jariwala, A.S., Rosen, D.W., “A Simple, Inexpensive, Real-Time Interferometric
`Cure Monitoring System for Optically Cured Polymers,” J. Applied Polymer Science, Vol. 129, No.
`5, pp 2653-2662, 2013, DOI: 10.1002/APP.38993.
`67. Rosen, DW, Jeong, N, Wang, Y, “A Method for Reverse Engineering of Material Microstructure for
`Heterogeneous CAD,” Computer-Aided Design, Vol. 45, No. 7, pp. 1068-1078, 2013,
`doi:10.1016/j.cad.2013.01.004.
`68. Mathai, G., Rosen, D.W., Melkote, S., Olsen, T.W., “Tissue Translocation Device for Surgical
`Correction of Age-related Macular Degeneration,” ASME J. of Medical Devices, Vol. 7, No. 4, pp. 1-
`8, 2013.
`69. Mathai, G., Melkote, S.N., Rosen, DW, “Effect of Process Parameters on Burrs Produced in
`Micromilling of a Thin Nitinol Foil,” ASME J. Micro and Nano Manufacturing, vol. 1, No. 2, paper
`021005, 2013.
`70. Zhou, W., Loney, D., Fedorov, A.G., Degertekin, F.L., Rosen, D.W., “What Controls Dynamics of
`Droplet Shape Evolution upon Impingement on a Solid Surface?” AIChE, Vol. 59, No. 8, pp. 3071-
`3082, 2013.
`71. Wu, D., Greer, M.J., Rosen, D.W., Schaefer, D., “Cloud Manufacturing: Strategic Vision and State-
`of-the-Art,” J. Manufacturing Systems, Vol. 32, No. 4, pp. 564-579, 2013. doi:
`10.1016/j.jmsy.2013.04.008
`72. Nguyen, J., Park, S-I., Rosen, DW, “Heuristic Optimization Method for Cellular Structure Design
`of Light Weight Components,” Int’l J. Precision Engineering and Manufacturing, Vol. 14, No. 6,
`pp. 1071-1078, 2013, doi: 10.1007/s12541-013-0144-5.
`73. Mathai, G., Melkote, S.N., Rosen, DW, “Material Removal during Abrasive Impregnated Brush
`Deburring of Micromilled Grooves in NiTi Foils,” Int’l J. Machine Tools and Manufacture, Vol. 72,
`pp. 37-49, 2013.
`74. Wu, D., Thames. J.L., Rosen, D., Schaefer, D., “Enhancing the Product Realization Process with
`Cloud-based Design and Manufacturing Systems.” ASME Journal of Computing & Information
`Sciences in Engineering (JCISE), Vol. 13, paper 041004, Dec. 2013.
`75. Huang, W., Rosen, D.W., Wang, Y., “Inverse Surfacelet Transform for Image Reconstruction with
`Prior Knowledge,” ASME J. Computing and Information Science in Engineering, Vol. 14, No. 2,
`paper 021005, June 2014.
`76. Bourell, D.L., Rosen, D.W., Leu, M.C., “The Roadmap for Additive Manufacturing and Its Impact,”
`3D Printing and Additive Manufacturing, Vol. 1, No. 1, pg. 6-9, 2014, doi:10.1089/3dp.2013.0002.
`
`8
`
`Page 8 of 67
`
`Markforged Ex. 1015
`Markforged v. Continuous Composites, IPR2022-01220
`
`

`

`77. Zhou, W., Loney, D., Fedorov, A.G., Degertekin, F.L., Rosen, D.W., “Shape Evolution of Multiple
`Droplet Interaction in Inkjet Deposition,” Rapid Prototyping Journal, Vol. 21, No. 4, pp , 2015. doi:
`10.1108/RPJ-12-2013-0131.
`78. Zhou, W., Loney, D., Fedorov, A.G., Degertekin, F.L., Rosen, D.W., “Lattice Boltzmann
`Simulations of Multiple Droplet Interaction Dynamics,” Physical Review E, Vol. 89, paper 033311,
`March 2014. doi: 10.1103/PhysRevE.89.033311.
`79. Rosen, D.W., “Multi-Scale, Heterogeneous CAD Representation for Metal Alloy Microstructures,”
`ASME Journal of Computing & Information Science in Engineering, Vol. 14, No. 4, 2014, paper
`041003, doi: 10.1115/1.4028196.
`80. Park, S-I, Rosen, D.W., Choi, S-K., Duty, C.E., “Effective Mechanical Properties of Lattice
`Material Fabricated by Material Extrusion Additive Manufacturing,” Additive Manufacturing, Vol.
`1-4, No. 1, pp. 12-23, 2014. doi: 10.1016/j.addma.2014.07.002
`81. Wu, D., Rosen, D.W., Wang, L., Schaefer, D., “Cloud-Based Design and Manufacturing: A New
`Paradigm in Design Innovation and Digital Manufacturing,” Computer-Aided Design, Vol. 59, pp. 1-
`14, 2015. doi:10.1016/j.cad.2014.07.006
`82. Jeong, N., Rosen, D.W., “Microstructure Feature Recognition for Materials Using Surfacelet-Based
`Methods for Computer-Aided Design-Material Integration,” ASME Manufacturing Science and
`Engineering, Vol. 136, December, 2014, paper 061021, doi: 10.1115/1.4028621.
`83. Rosen, D.W., “Research Supporting Principles for Design for Additive Manufacturing,” Virtual and
`Physical Prototyping, Vol. 9, No. 4, pp. 225-232, 2014. DOI: 10.1080/17452759.2014.949406
`84. Zhao, X., Rosen, D.W., “Simulation Study on Evolutionary Cycle to Cycle Time Control of
`Exposure Controlled Projection Lithography,” Rapid Prototyping Journal, 22(3), pp. 456-464, 2016.
`http://dx.doi.org/10.1108/RPJ-01-2015-0008
`85. Choi, S.-K., Gorguluarslan, R., Park, S.-I., Stone, T., Moon, J.K., Rosen, D.W., "Simulation-based
`Uncertainty Quantification for Additively Manufactured Cellular Structures," Journal of Electronic
`Materials, Vol. 44, No. 10, pp 4035-4041, 2015. DOI: 10.1007/s11664-015-3841-2.
`86. Alzahrani, M., Choi, S.K., Rosen, D.W., (2015) “Design of Truss-Like Cellular Structures using
`Relative Density Mapping Method,” Materials and Design, Vol. 85, No. 15,pp. 349-360.
`87. Wu, D., Rosen, D.W., Schaefer, D., “Scalability Planning for Cloud-Based Manufacturing Systems,”
`ASME J. Manufacturing Science and Engineering, Vol. 137, paper 041007, 2015. DOI:
`10.1115/1.4030266
`88. Gorguluarslan, R., Park, S-I, Rosen, D.W., Choi, S-K., “A Multi-Level Upscaling Method for
`Material Characterization of Additively Manufactured Part Under Uncertainties,” ASME J. of
`Mechanical Design, Vol. 137, No. 11, paper 111408, 2015. doi:10.1115/1.4031012.
`89. Wu, D., Rosen, D.W., Panchal, J., Schaefer, D., “Understanding Communication and Collaboration
`in Social Product Development through Social Network Analysis,” ASME J. Computing &
`Information Science & Engineering, Vol. 16, No. 1, paper 011001, 2016. doi: 10.1115/1.4031890
`90. Huang, W, Rosen, D.W., Wang, Y., “A Multi-scale Materials Modeling Method with Seamless
`Zooming Capability based on Surfacelets,” ASME Journal of Computing and Information Science in
`Engineering, Vol 17, No 2, paper 021007, 2017, doi:10.1115/1.4034999
`91. Park, S-I., Rosen, D.W., “Quantifying Effects of Material Extrusion Additive Manufacturing
`Process on Mechanical Properties of Lattice Structures Using As-Fabricated Voxel Modeling,”
`Additive Manufacturing, Vol. 12, pp 265-273, 2016. doi: 10.1016/j.addma.2016.05.006
`92. Rosen, D.W., “A Review of Synthesis Methods for Additive Manufacturing,” Virtual & Physical
`Prototyping, Vol 11, No 4, pp 305-317, 2016, DOI: 10.1080/17452759.2016.1240208
`93. Zhao, X., Rosen, D.W., “Real-time interferometric monitoring and measuring of
`photopolymerization based stereolithographic additive manufacturing process: sensor model and
`
`9
`
`Page 9 of 67
`
`Markforged Ex. 1015
`Markforged v. Continuous Composites, IPR2022-01220
`
`

`

`algorithm,” Measurement Science & Technology, Vol. 28, paper 015001, 2017. DOI: 10.1088/0957-
`0233/28/1/015001.
`94. Zhao, X., Rosen, D.W., “Experimental validation and characterization of a real-time metrology
`system for photopolymerization based stereolithographic additive manufacturing process,” Int’l J.
`Advanced Manufacturing Technology, 2016, DOI: 10.1007/s00170-016-9844-1
`95. Bourell, D., Kruth J.P., Leu, M., Levy, G., Rosen, D., Beese, A.M., Clare, A., “Materials for
`Additive Manufacturing,” CIRP Annals Manufacturing Technology, Vol. 66, No. 2, pp. 659-681,
`2017.
`96. Dinar, M., Rosen, D.W., “A Design for Additive Manufacturing Ontology,” ASME J. Computing
`and Information Science in Engineering, Vol 17, No 2, paper 021013, 2017. doi: 10.1115/1.4035787
`97. Zhao, X., Rosen, D.W., “A data mining approach of real-time process measurement for polymer
`additive manufacturing with the exposure controlled projection lithography,” Journal of
`Manufacturing Systems, Vol. 43, pp 271-286, 2017. DOI: doi.org/10.1016/j.jmsy.2017.01.005
`98. Fitzharris, E.R., Watanabe, N., Rosen, D.W., Shofner, M.L., “Effects of Material Properties on
`Warpage in Fused Deposition Modeling Parts,” Int’l J. Advanced Manufacturing Technology, 95(5),
`pp. 2059-2070, 2018. DOI: doi.org/10.1007/s00170-017-1340-8.
`99. Park, S.I., Watanabe, N., Rosen, D.W. (2018) “Estimating Failure of Material Extrusion Lattice
`Structures Based on Deposition Modeling and a Cohesive Zone Model,” Materials and Design, Vol.
`147, pp. 122-133. https://doi.org/10.1016/j.matdes.2018.03.034
`100. Park, S-I., Rosen, D.W., “Homogenization of Mechanical Properties for Material Extrusion
`Periodic Lattice Structures Considering Joint Stiffening Effects,” ASME Journal of Mechanical
`Design, Vol. 140, No. 11, paper 111414, 2018. DOI: 10.1115/1.4040704
`101. Fitzharris, E.R., Watt, I., Rosen, D.W., Shofner, M.L., “Interlayer bonding improvement of material
`e