BIRD BARRIER VIDEO TRANSCRIPT:
`
`[0:10] Carefully open the mist net packaging and lay the netting flat. [0:18] With the mist
`net laying flat on the floor carefully lift each support line and fold it over the net slightly to
`create the horizontal pockets that will be used to capture the birds. This is best done with one
`person on each end. [0:37] Once the pockets are formed carefully slide the 55-inch extensions
`into the loops on either side of the net making sure not to move the netting too far out of place.
`The loop should be placed evenly along the length of the pole. [0:51]With the loops in place on
`the pole carefully secure them to the pole with duct tape. [0:58]
`
`[1:03]Attach the adjustable magnetic head to the end of each pole by screwing it onto the
`threaded tip. [1:15] Insert the threaded tip of each main pole into the collared receiver at the
`bottom of each net pole screw each telescoping pole into the piece and then tighten the collars to
`lock them firmly in place. Each operator should then carefully lift his or her pole together and
`walk the completed net assembly to a target location near where the bird activity has been
`observed. [1:44] The first net operator attaches his or her pole to a magnetic surface such as the
`rafter in this example. [1:49] [1:54] The second operator will then pull the net taut and attach the
`pole to a magnetic surface also. [1:59] The net is now hanging in position and ready to catch the
`target birds. [2:11] The net poles did not need to be secured at the bottom but for safety should
`not be left unattended.
`
`[2:19] When a bird is captured, the net should be taken down immediately so the bird
`may be removed while it is still alive. The captured bird or bird should be transferred to a
`holding cage so they may be safely released out of the building. Taking down the net is simple:
`first each operator should remove his or her pole from the attachment point by firmly pulling on
`the handle. [2:47] Then they carefully walk the net back to the staging area where they can lay it
`flat and detach the telescoping poles. Remove the net pole by loosening the respective collars
`and carefully unscrewing a telescoping-poles. [3:01] Mist netting is a very fine net and becomes
`easily entangled with itself. Even when rolled up on a pole it can easily become entangled.
`
`For storage we recommend that you carefully lay the mist net on a long section of paper
`or plastic before rolling it up. Make sure that the net stays entirely on the sheet, you may need to
`slide in the edges slightly. Carefully roll the net and sheet together around one of the poles. This
`is easiest with one operator rolling the net and the sheet together while the other keeps the loose
`end straight and contained within the sheet. Do not discard the sheet it must be used every time.
`
`Safe Haven Wildlife Removal
`Ex. 1004
`Page 1 of 11
`
`

`

`BIRD BARRIER VIDEO SCREENSHOTS:
`
`Figure 1 – Screenshot of YouTube Webpage
`
`2
`
`Safe Haven Wildlife Removal
`Ex. 1004
`Page 2 of 11
`
`

`

`Mist Net Kit Assembly and Use
`
`© *
`
`Bird Barrier
`
`How Use The New Mist Net Kit
`
`^ H 49 0:03 / 3 52
`
`Scroll for details
`
`Figure 2 – Screenshot at 0:03
`
`Safe Haven Wildlife Removal
`Ex. 1004
`Page 3 of 11
`
`

`

`Figure 3 – Screenshot at 0:10
`
`Figure 4 – Screenshot at 0:18
`
`Safe Haven Wildlife Removal
`Ex. 1004
`Page 4 of 11
`
`

`

`Figure 5 – Screenshot at 0:37
`
`Figure 6 – Screenshot at 0:51
`
`Safe Haven Wildlife Removal
`Ex. 1004
`Page 5 of 11
`
`

`

`Figure 7 – Screenshot at 0:58
`
`Figure 8 – Screenshot at 1:03
`
`Safe Haven Wildlife Removal
`Ex. 1004
`Page 6 of 11
`
`

`

`Figure 9 – Screenshot at 1:15
`
`Figure 10 – Screenshot at 1:44
`
`Safe Haven Wildlife Removal
`Ex. 1004
`Page 7 of 11
`
`

`

`Figure 11 – Screenshot at 1:49
`
`Figure 12 – Screenshot at 1:54
`
`Safe Haven Wildlife Removal
`Ex. 1004
`Page 8 of 11
`
`

`

`Figure 13 – Screenshot at 1:59
`
`Figure 14 – Screenshot at 2:11
`
`Safe Haven Wildlife Removal
`Ex. 1004
`Page 9 of 11
`
`

`

`Figure 15 – Screenshot at 2:19
`
`Figure 16 – Screenshot at 2:47
`
`Safe Haven Wildlife Removal
`Ex. 1004
`Page 10 of 11
`
`

`

`u
`
`j
`
`j
`
`1
`
`Mist Net Kit Assembly and Use
`
`5.
`
`o *
`
`r.
`
`■»
`
`r
`
`immr
`
`s
`
`m1
`
` r
`
`j
`
`&
`
`h
`
`i
`
`Scroll lor details
`
`Figure 17 – Screenshot at 3:01
`
`^ ►! 4i) 3:01 / 3:52
`
`O IS O sr
`
`Safe Haven Wildlife Removal
`Ex. 1004
`Page 11 of 11
`
`