UNITED STATES PATENT AND TRADEMARK OFFICE
`
`UNITED STATES DEPARTMENT OF COMMERCE
`United States Patent and Trademark Office
`AddIESS. COMMISSIONER FOR PATENTS
`PO Box 1450
`Alexandria, Viigmia 22313-1450
`wwwusptogov
`
`
`
`
`F ING OR 371 (C) DATE
`
`
`
`APPLICATION NUMBER
`
`FIRST NAMED APPLICANT
`
`ATTY. DOCKET NO./TITLE
`
`15/632,497
`
`06/26/2017
`
`Warren Foster
`
`GWLG-017US-CIP
`CONFIRMATION NO. 2488
`
`88993
`
`Milstein Zhang & Wu LLC
`2000 Commonwealth Avenue, Suite 400
`Newton, MA 02466-2004
`
`FORMALITIES LETTER
`
`llIIlIlIlllIlllllIIlllIIllIIIlllllIllllIIlllIIllIlIllIlllllIlIllllllIllllllllllllllllllllll
`0000000927 5 66
`
`Date Mailed: 07/12/2017
`
`NOTICE TO FILE CORRECTED APPLICATION PAPERS
`
`Filing Date Granted
`
`An application number and filing date have been accorded to this application. The application is informal since
`it does not comply with the regulations for the reason(s) indicated below. Applicant is given TWO MONTHS
`from the date of this Notice within which to correct the informalities indicated below. Extensions of time may be
`obtained by filing a petition accompanied by the extension fee under the provisions of 37 CFR 1.136(a).
`
`The required item(s) identified below must be timely submitted to avoid abandonment:
`
`' Replacement drawings in compliance with 37 CFR 1.84 and 37 CFR 1.121 (d) are required. The drawings
`submitted are not acceptable because:
`' More than one figure is present and each figure is not labeled "Fig." with a consecutive Arabic numeral (1,
`2, etc.) or an Arabic numeral and capital letter in the English alphabet (A, B, etc.)(see 37 CFR 1.84(u)(1)).
`See Figure(s) 15 page 17. A brief description of the several views of the drawings (see 37 CFR 1.74)
`should be added or amended to correspond to the corrected numbering of the figures. See also 37 CFR
`1.77(b)(9).
`' This application does not contain, as a separate part of the disclosure on paper copy, a "Sequence Listing" as
`required by 37 CFR 1.821 (c) Applicant must provide an initial paper or compact disc copy of the "Sequence
`Listing", as well as an amendment specifically directing its entry into the application and a statement
`that the content of the sequence listing information recorded in computer readable form is identical to the
`written (on paper or compact disc) sequence listing and, where applicable, includes no new matter, as
`required by 37 CFR 1.821(e), 1.821(f), 1.821(g), 1.825(b), or 1.825(d). If the effective filing date is on or
`after September 8, 2000, see the final rulemaking notice published in the Federal Register at 65 FR 54604
`(September 8, 2000) and 1238 CO 145 (September 19, 2000).
`' A copy of the "Sequence Listing" in computer readable form has not been submitted as required by 37
`CFR 1.821 (e). If the effective filing date is on or after September 8, 2000, see the final rulemaking notice
`published in the Federal Register at 65 FR 54604 (September 8, 2000) and 1238 CO 145 (September 19,
`2000). Applicant must provide an initial computer readable form (CRF) copy of the "Sequence Listing" and a
`statement that the content of the sequence listing information recorded in computer readable form is identical
`to the written (on paper or compact disc) sequence listing and, where applicable, includes no new matter,
`as required by 37 CFR 1.821 (e), 1.821(f), 1.821 (g), 1.825(b), or 1.825(d). lf applicant desires the sequence
`listing in the instant application to be identical with that of another application on file in the US. Patent and
`Trademark Office, such request in accordance with 37 CFR 1.821 (e) may be submitted in lieu of a new CRF.
`
`For questions regarding compliance to these requirements, please contact:
`- For Rules interpretation, call (571) 272-2510
`
`page 1 of 2
`
`

`

`- For CRF submission help, call (571) 272-2510
`- For Patentln software program support technical assistance, call (866)217-9197.
`- Send e-mail correspondence for Patentln software program help to ebc@uspto.gov
`- Patent software is available at http://www.uspto.gov/patents/resources/tools/checker/patentinrel.jsp .
`
`Applicant is cautioned that correction of the above items may cause the specification and drawings page count to
`exceed 100 pages. If the specification and drawings exceed 100 pages, applicant will need to submit the required
`application size fee.
`
`Items Required To Avoid Processing Delays:
`
`Applicant is notified that the above-identified application contains the deficiencies noted below. No period for
`reply is set forth in this notice for correction of these deficiencies. However, if a deficiency relates to the inventor's
`oath or declaration, the applicant must file an oath or declaration in compliance with 37 CFR 1.63, or a substitute
`statement in compliance with 37 CFR 1.64, executed by or with respect to each actual inventor no later than the
`expiration of the time period set in the "Notice of Allowability" to avoid abandonment. See 37 CFR 1.53(f).
`
`' A properly executed inventor's oath or declaration has not been received for the following inventor(s):
`Warren Foster
`
`Jocelyn Wessels
`Sanjay Agarwal
`
`Replies must be received in the USPTO within the set time period or must include a proper Certificate of Mailing
`or Transmission under 37 CFR 1.8 with a mailing or transmission date within the set time period. For more
`information and a suggested format, see Form PTO/SB/92 and MPEP 512.
`
`Replies should be mailed to:
`
`Mail Stop Missing Parts
`Commissioner for Patents
`PO. Box 1450
`Alexandria VA 22313-1450
`
`Registered users of EFS-Web may alternatively submit their reply to this notice via EFS-Web, including a copy
`of this Notice and selecting the document description "Applicant response to Pre-Exam Formalities Notice".
`https://sportal.uspto.gov/authenticate/AuthenticateUserLocalEPF.html
`
`For more information about EFS-Web please call the USPTO Electronic Business Center at 1-866-217-9197 or
`visit our website at http://www.uspto.gov/ebc.
`
`If you are not using EFS—Web to submit your reply, you must include a copy of this notice.
`
`Questions about the contents of this notice and the
`requirements it sets forth should be directed to the Office
`of Data Management, Application Assistance Unit, at
`(571) 272-4000 or (571) 272-4200 or 1-888-786-0101.
`
`/ygizaW/
`
`page 2 of 2
`
`