Filed Jan. 25, 2008

Serial No. 77380799

Registered April 1, 2014

Registration No. 4,505,527

Class Manually operated tools and attachments therefor for industrial use in measuring and testing engines and generators in connection with automotive, engine and vehicle diagnostics, maintenance and repair, namely, metal mandrels for precision assembly of water pump drive gears, metal mandrels used to permit assembly and disassembly of press-fit components and for measuring the fit of components, metal mandrels for precision assembly of a guide pin, metal mandrels for disassembly of a valve guide, metal hooks for lifting and hoisting engines, metal cylindrical nozzle socket adaptors for a fuel injection pump, manually operated pulleys used to permit precision engine components to be hoisted and properly aligned for assembly, hardware kits consisting of a metal plate, metal guide pin, metal alignment pin and metal bushing which are used to permit the in-situ adjustment and alignment of a fuel pump, spacer brackets of metal used to separate bearing houses from turbines wrenches, metal mounting brackets and metal extracting handles for assembling and disassembling turbochargers, metal cylindrical plugs used in assembling engine parts together and to permit precision engine components to be properly aligned for assembly, flywheel housing alignment plates used to maintain a press fit between the flywheel housing and an engine to permit precision alignment during for assembly, hand operated metal cylinders used as a guide to place a valve seal at the proper height and to square it against the surface when installing seals and valves in engines, manual seal expanders in the nature of hand operated metal tubes used to stretch and expand and load a rubber seal onto a seal installer to enable the disassembly and assembly of press fit components, hand operated metal tube sockets, metal spacer rings, manual wear sleeve installers in the nature of metal spacer ring, metal bolts used to install used to permit the assembly of press-fit components, hand operated metal expansion rings used to install piston rings on a piston to permit the assembly of press-fit components in an engine, a pulley system comprised of metal rollers, metal arbors, metal spacers and metal connector for pushing various pulleys into their respective shafts which are then used in the assembly of press-fit components, metal damper blocks used in testing the gear pump glow capacity, fuel pump alignment system comprised of hand operated metal guide pins, hand operated metal alignment pin and metal bushings used to align a pump key and gear keyway on a fuel pump and to permit the in-situ adjustment of a fuel pump, ball seating tools in the nature of metal bolts used to seat the check ball in an injector, hand operated injector sleeve extenders comprised of a metal mandrel and metal roller used to expand an injector sleeve to install new sleeves in the disassembly of press fit components; 002; 012; 013; 014; 023; 025; 050; 013; 019; 021; 023; 031; 034; 035; 023; 028; 044; 021; 023; 026; 036; 038

Case Type Trademark